• International Journal of Human Ecology
• /
• v.2 no.1
• /
• pp.95-110
• /
• 2001

The purpose of this research is to analyze how appropriately the sizing of domestically produced children's wear compares to children's sizes; it is based on an anthropometric survey conducted in 1998. By discovering and understanding discrepancies between the sizing system of children s wear and the real size of children, this study aims to suggest solutions that will lead to increased comfort and more suitable fitting in children's clothes. This research analyzes and compares 'the extent of growth between age groups' with 'the difference in sizing system in use by manufacturers'. The study focused on aged 4 to 12 children, who are usually divided in two groups; primary students and toddlers. In total, seven sizes were selected: bust, waist, and hip (which are girth sizes), and height, back neck to waist (top length), sleeve length, and waist to ankle (slacks length) as representing length. The results of this research are analyzed by basing on the actual increments between the sizes of children's wear in certain basic items rather than sizes themselves because each size quite differed according to companies, items and designs. Significantly, the increase in the sizing was not as great as the average biennial growth rate of children. The consequences are poorer fit and unsuitable representative value for each age group because the actual sizes of children increasingly differ from the sample size. Observing the increments in several sizes, we found that 81.8% of the companies used the certain and equal increases for grading sizes in sleeve length, waist, and bust. In addition, 72.7% of the companies adopted the same increments between sizes in height and hip girth, and 63.6% also chose equal increments in T-shirt length for making smaller or bigger sizes from the sample size. However, sleeve length and pant length were the components that displayed the most varied sizing. Interestingly, the few companies that used different increments between size groups, adopted the change only between one or two size groups, instead of all sizes. In conclusion, this research reveals the unsuitability of the current sizing system and the necessity to increase consumer confidence in the size tags on children's wear by modifying the system to reflect the actual growth of children. The results can also contribute to future study on the development of a new and more accurate sizing system for children's wear.

• The Academic Congress of Korean Shoulder and Elbow Society
• /
• 2008.03a
• /
• pp.164-164
• /
• 2008

The beach-chair traction position is designed to allow the use of traction while allowing the surgeon to orient the shoulder in an upright position and convert to an open procedure, if necessary. The patient is placed in the beach-chair position under general anesthesia. A three-point shoulder holder (Arthrex, Naples, Florida) is attached to the rail of the operating table on the same side as the surgeon, whereas it is placed on the side opposite the surgeon in the lateral decubitus position. A shoulder traction and rotation sleeve (Arthrex) are affixed to the arm following the manufacturer's instructions. Positioning the thumb toward the closed side of the sleeve ensures a field for the anterior portion of the rotator cuff and prevents the tendency of the suspension apparatus to place the arm in internal rotation. The arm is maintained in 30 to 40 degree abduction and 30 to 40 degree flexion by controlling the length and height of the bar and the location of the universal clamp. The universal clamp allows multiple planes of adjustment to control abduction and forward movement of the arm. The sleeve is attached to the longitudinal traction cable using a sterile hook, and a lateral strap is secured around the proximal portion of the sleeve to the overhead traction cable to ensure a field for glenohumeral reconstruction. The use of a lateral strap permits ideal shoulder positioning for improved access to the anterior and inferior glenohumeral joint. The lateral strap can be released or removed to widen the subacromial space during subacromial decompression or rotator cuff repair. A 10-lb weight is attached to the longitudinal traction cable for an average-sized person.

• Fashion & Textile Research Journal
• /
• v.16 no.5
• /
• pp.766-775
• /
• 2014

This study is aimed to research the actual wearing condition of ballet dancewear of girls aged between 2 and 6 years on its design, size and fit. Survey data were collected from 171 mothers who have a girl learning ballet dance. The questionnaire was composed with ballet education, ballet dancewear purchasing, preference on design, size selection, and fitting. The collected data were analyzed with frequencies statistics, ${\chi}^2$-test, ANOVA using the SPSS WIN 20.0. The results are as follows; High rate of respondents said that the purpose of ballet education was for good body balance, leisure activity, and height growth. The main method of purchase was online shopping. The design, price, size and fit were identified as important ballet dancewear attributes for girls. The most preferred style of ballet dancewear were 'short sleeve skirted leotard' and 'camisole skirted leotard' which look like dress. The respondents reported slight satisfaction with size and fit, price, convenience in action, sewing and durability. The most preferred sizing system was code by height but any ballet dancewear makers don't use code by height. Therefore it is difficult for consumers to select size. Retailers and manufacturers could potentially use the results of this study to improve the sizing system and fit for children's ballet dancewear.

• The Research Journal of the Costume Culture
• /
• v.17 no.2
• /
• pp.203-215
• /
• 2009

The purpose of this study was to investigate current garment sizes of women's formal jackets, targeting plus-size women in online shopping malls, and to identify effective size information involved in online apparel purchase behaviors to overcome the short comings of current garment sizes from the perspectives of consumers. Basic 88 size formal jackets from the seven companies found on the 22 websites were collected and analyzed. The data were collected from March to October 2007, and analyzed using SPSS 14.0. The results were summarized as follows. First, there was no website using standard garment size labeling with 'bust-hip-height' set up by KS K 0051 among the 22 websites. Instead, all 22 websites used garment size labeling with figures such as 88, 99, 100, 110, and 120 or with letters such as L, XL, and XXL. The websites presented no body size, but listed garment size. Furthermore, the size information was presented differently, ranging from three items of bust circumference, upper arm length, and jacket length to six items of shoulder width, bust circumference, waist circumference, sleeve width, sleeve length, and jacket length. In addition, no website presented basic information for hip circumference, despite the jacket length covering the hips. Second, a total of 85.7% the websites listed bust circumferences in 88 garment sizes collected as 100cm. Shoulder widths were presented as 39cm or 37cm. Sleeve circumferences were addressed the same, 36cm, in all websites. Third, comparing the differences between guidance sizes and measurement sizes, only 28.5% of the web sites posted guidance sizes of shoulder widths the same as those of the measurement sizes. All web sites presented guidance sizes of bust circumstances as 1 to 5cm smaller than those of the measurement sizes.

• The Research Journal of the Costume Culture
• /
• v.12 no.2
• /
• pp.249-261
• /
• 2004

This research proves the ROM method (Range Of Motion), which has already been used in other countries, that measures the capacity of exercise and the adaptation of movement of functional garments for special purpose due to change of the height of basic sleeve sloper. Basically, the ultimate goal of the research is to improve the functional pattern design. Firstly, this research proves the proper application of ROM that is used for the evaluation of fitting test. Therefore, according to this research, the company is able to produce the sample that is appropriate to the various purpose for women garments and betters the evaluation of function of garments. Moreover, it suggests that the evaluation of fitting test satisfies the consumers who desire to try better garments and contributes to the competitions among the companies that bring more improvements to the fashion design.

• Korean Journal of Human Ecology
• /
• v.10 no.4
• /
• pp.379-390
• /
• 2001

The purpose of this study is to investigate the fitness according to drafting method of the block patterns for women in Korea. The major findings of this study are as follows: 1. According to comparative analysis of required measurements, two measurements of back length and bust girth are used in Proportional Drafting Method (Munhwa). In case of Compromise Drafting Methods are used across chest, across back, bust length, bust width, full length in front, across shoulder and shoulder length in addition to back length and bust girth. The type of Armstrong as a Short Measure Drafting Method uses 10 measurements for the drafting the bodice. 2. While Esmod block pattern arid Armstrong's block pattern are the lightest in full width and other widths. Rasara block pattern is the most ample. In Lee, Myung-hee's block pattern and Lee, Hyung-sook's block pattern, amounts of drooping are decided $3{\sim}4cm$, but drooping amounts of other block patterns are decided corresponding to real measurements. While cap height in Esmod and Armstrong's sleeve patterns are directly measured Armhole length of the block pattern, cap height of other sleeve patterns are used armhole depth and cap height length as well as armhole length. 3. When analyzing to indirect measurements, Esmod block pattern shows the least different between full length of block pattern and that of body form. Munhwa block pattern and Kim, Hyosook's block pattern are mostly same to body form back length. However all of the block patterns are sheller than body form length. In case of Suh, Wansuk's block pattern, across back and across chest are same size, but other block patterns show difference between across back and across chest. Most block patterns' neck width in front and bach bodice are almost same. Front neck width is generally bigger than back neck width in some cases.

• The Research Journal of the Costume Culture
• /
• v.26 no.1
• /
• pp.30-44
• /
• 2018

The study purpose was to investigate the jacket-fit satisfaction level of men in their 20s and 30s, using body-scanning data and a questionnaire. Thirty-five men were scanned using a 3D body scanner. The participants were divided into three groups (Small, Medium, and Large) based on their chest-circumference measurement. Their levels of satisfaction with the fit of their tailored jacket were compared by group. Chest, waist, and hip circumferences increased substantially as group size increased. The M-group was mostly satisfied with all body-site views. The S-group was especially dissatisfied with height, back width, waist circumference, and upper-arm circumference. The L-group was especially dissatisfied with waist circumference and hip circumference. The majority of the participants preferred the jacket closely fitted to their body. More than half of the participants thought finding a jacket of suitable size was difficult. When purchasing ready-to-wear jackets, the S-group and the M-group considered shoulder width important, while the L-group considered chest circumference the most important area. When evaluating the fit of ready-to-wear jackets, the L-group evaluated chest circumference, back width, and waist circumference as poor fits. The M-group evaluated sleeve length and shoulder width as poor fits, and the S-group agreed with respect to sleeve length. Body-satisfaction levels and matching jacket-satisfaction levels differed by body-size group, as did areas that need improvement. The conclusion is that size-group analysis using 3D body scanning can be utilized effectively for jacket-fit analysis. The findings of the current study can be applied to improving jacket fit among young male consumers.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.14 no.4
• /
• pp.89-98
• /
• 2012

The purpose of this study is to female child Han-bok reform design for body growth. Nowadays there is common the western style daily life and special day instead of traditional style Han-bok in Korea. So the decrease in the use of Han-bok have being appeared. Specially, Children's Han-bok undesirable clothes for economic, environment, and resources because of their rapid growth and changing trend. Therefor, they do away with used Han-bok without next buying of school age. Children's parents and children are decision together purchase of children's Han-bok on-line for pleasure and economic reasons on pre-school or 1st year student for their tradition-education class. After 2000year, children's Han-bok pup-up on e-market because of the fashion focus on tradition and Korean wave for parody of Korean drama. Flowing the Research of 2010 Size Korea, the elementary school age child height growth 6cm per year, the sleeve length are 3cm growth. But Chi-ma(a pice of Han-bok) from e-market, has only 5cm margin on shoulder and no margin on Jegori(a pice of Han-bok) shoulder and sleeve, reason of that the children can't wear next year. Therefor this study is development female child Han-bok reform design for body growth, for extend to wear Han-bok on school age children and flow tradition custom of Cho-sun Dynasty's clothing custom for boost tradition conscious and reduce of cloth waste for environment.

• The Research Journal of the Costume Culture
• /
• v.24 no.5
• /
• pp.617-625
• /
• 2016

In women's clothing the shoulders are distorted and exaggerated. Consequently, the wearers' bodies are transformed and interpreted according to modern standards. We therefore refer to this aspect of women's clothing as the power shoulder. This study aims to analyze the differences in sensibility images on variations in the shoulder shape of power shoulder jackets. Nine samples were examined that involved combinations of three variations of the shoulder height and three variations of the shoulder width. The data was evaluated by 123 fashion design majors. Four factors were selected: attractiveness, personality, activity, and self-respect. Among these factors, attractiveness is the most important. The study results indicated that changes in shoulder height acted as a major effect that had an independent influence on all four factors. In contrast, changes in shoulder width acted as a major effect that had an independent influence on attractiveness, personality, and activity but not on self-respect. It also had an influence on the interaction effect of attractiveness, personality, activity, and self-respect. We anticipate that this study will help individual customers select clothing that is suitable for their preference and body shape because it is now possible for them to estimate images of power shoulder jackets.

• Journal of the Korean Society of Costume
• /
• v.63 no.7
• /
• pp.1-16
• /
• 2013

The objective of this study is to analyze the characteristic of a functional design for a commercial outdoor brand jacket based on 3 types of functions : windproof, waterproof, and cold proof. To analyze the design and fabric characteristics of outdoor jackets by function, 903 men's and women's outdoor jacket images were selected from the catalogues during S/S 2009 - F/W 2011 of the 6 brands: The North Face, Columbia Sports Wear, Kolon Sports, K2, Arcteryx and Mont-Bell. These brands were selected based on their high market share and brand awareness of the outdoor brands in Korea. In this study, design elements analysis was conducted as following 8 elements: hood/collar height/central front flap/waistline/pocket location/ventilation for the body part/sleeve patterns/cuff for the sleeve part. Fabrics were analyzed by the frequency of fabric types used in the 3 jacket types. According to the result derived from the analysis of the six brands of outdoor wear jacket design trends by year, detachable hood and a co-use of velcro and elastic bands have been mainly designed for all of windproof, waterproof, and cold proof jacket to all in order to respond quickly to changes in the external environment. For reinforced storage function on trekking, the number of pockets has been gradually growing, and a function was being developed to connect an electronic device to a pocket. The method, result, and collateral observations relevant to each of these phases are described. Outdoor jacket design characteristics were investigated for outdoor brands, which can provide data to suggest more accurate functional design, and satisfy functional design needs. In this regard, this research was significant in the sense that it suggested preliminary data to reconsider competitiveness of the brand products.