• 복합신소재구조학회 논문집
• /
• 제6권1호
• /
• pp.51-58
• /
• 2015

Global buckling is a bending of pipeline and it occurs when the stability of pipeline is distributed by excessive axial force. Subesea pipeline is subjected to axial force induced by temperature and pressure from well and resulting phenomena should be controlled in appropriate manner. Global buckling of subsea pipeline is still ongoing research subject and is studied various organization. In this study, various control methods such as buoyancy module, sleeper, and snake lay for global buckling of subsea pipeline were numerically investigated with various design parameters. From the numerical simulation results, the global buckling control method using sleepers shows better results than buoyancy module and snake lay control methods in the sense of combined stress after buckling. Furthermore, the global buckling of full scale pipeline of 80km with uneven seabed profile were successfully managed when the sleeper was installed.

• 복합신소재구조학회 논문집
• /
• 제6권2호
• /
• pp.40-45
• /
• 2015

The load of a maglev train, which is being considered a future transportation, is uniformly loaded on a levitated surface of a rail unlike a typical train because the maglev train is magnetically levitated and propelled. In addition, the driving performance is superior since the maglev train doesn't directly contact the railway. A integrated track system, to which a sleeper is installed toward a longitudinal direction instead of a perpendicular direction, is suggested, considering this loading characteristic. The longitudinal sleeper of this system is expected to contribute to stiffness increase of a bridge and weight-reduction of a girder. In this study, the structural characteristics of proposed and typical systems have been numerically compared and analyzed. In addition, the improvement of the integrated system has been proposed.

• 한국발생생물학회지:발생과생식
• /
• 제18권4호
• /
• pp.259-266
• /
• 2014

The egg development and early life history of Korean spotted sleeper, Odontobutis interrupta which is Korean endemic species from Sora-choen was investigated. The Korean spotted sleeper were caught at Sora-myeon, Yeosu-si, Jeollanamdo, from Korea at May in 2014. The fertilized eggs were $4.23{\pm}0.05mm$ in long diameter and had oil globules. Hatching time of the embryo began about 442 hr 14 min after fertilization under water temperature of $19.5^{\circ}C$. The newly hatched larvae were $4.27{\pm}0.35mm$ in total length and their anus were not yet opened. 3 days after hatching postlarvae was measured $6.20{\pm}0.11mm$ in total length. 10 days after hatching postlarvae was measured $6.69{\pm}0.14mm$ in total length.

• 한국산학기술학회논문지
• /
• 제19권2호
• /
• pp.702-709
• /
• 2018

노후화된 자갈궤도를 콘크리트 궤도로 개량하는 급속경화궤도 기술이 개발되어 일반철도 및 도시철도의 토공 및 터널 현장에 적용되고 있다. 프리스트레스 방식으로 제작되는 콘크리트 침목에는 일반적으로 보강 개념의 철근이 적용되지 않는다. 그러나 철도 현장에 부설된 침목 다수에서 균열 발생 사례가 관찰되고 있다. 급속경화궤도 시스템의 주요 구성품 중 하나인 광폭침목은 이러한 문제가 발생되지 않도록 자갈궤도 및 콘크리트 궤도 상태에서 구조적인 안전성이 보장되어야하며 균열 저항성이 확보되어야 한다. 특히 포스트텐션 방식으로 제작되는 광폭침목은 반드시 레일 좌면부에 인장부 보강철근이 적용되어야 한다. 본 논문에서는 급속경화궤도용 광폭침목의 보강철근 적용 유무에 따른 침목의 보유 휨 내력 및 균열저항 성능을 비교 및 평가하기 위하여, 정적 및 동적 휨강도 시험, 피로 시험을 실시하였다. 시험 결과 광폭침목 레일 좌면부에 주재료인 강봉 뿐만 아니라 소수의 보강철근을 적절하게 배치할 경우 균열발생 억제 및 균열폭 확대 지연, 휨 파괴 지연 효과를 확인할 수 있었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1667-1673
• /
• 2011

For performance evaluation of modified wide sleepers(MF-140 PSC sleepers), design moment for urban transit was calculated and then performance evaluation criteria were set up according to EN 13230-2. Next, static bend tests, dynamic tests at rail seat section of sleeper were carried out and static bend tests at center section of sleeper were fulfilled. The test results for modified wide sleepers were in excess of performance evaluation criteria and structural safety of sleepers was able to guaranteed from the results. As modifying depth of wide sleepers, construction convenience in underground will be expected to be improved and construction costs will be expected to be decreased.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.382-399
• /
• 2011

Impact factor of concrete and ballast track which has been used in Korea railway was applied to equation (1+0.513V/100) from AREA. As the use of this equation, overcapacity of track design might be occurred. Therefore, this study compared impact of ballast track (well, bad) and concrete track (sleeper embeded system, rail floating and sleeper floating) by field test to analyzing dynamic effect of track structure's characteristic and wheel load on service line. In addition, it suggested a method to generate reasonable track impact factor on each track type.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.726-733
• /
• 2005

It is very important to pay careful attention to construction of earthwork/tunnel transition zone for railway. The transition zone of the railway is the section which roadbed stiffness is suddenly varied. Differences in stiffness have dynamic effects and these increase the forces in the track and the extent of deformation. In this study, performance of transition zone was investigated through the field tests. The wheel loads and sleeper settlement were measured after installing field testing sections.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.924-928
• /
• 2002

Response of the rail surface is an important factor for the train safety and comfortable travel, and evaluation of vibration at the area along a rail is an important factor for the vibration. The dominant method to reduce the vibration that reach the ground is installing vibration absorber between rall and the under structure. In this paper, we evaluated the vibration reducing effect of using vibration control sleeper pads to slave and earth at certain distance from the sleepers.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.84-90
• /
• 2009

The gravel ballast in the ballasted track has the function to not only transfer/scatter the train loads to subgrade through rail and sleeper but also elastically support the train loads. Because track irregularities results inevitably from the repetitive train loads, the track maintenance should be undertaken for correcting them. By analyzing the track maintenance history in the Gyeongbu high speed railway, this study tries to choose the local two spots in the railway in which the repair frequencies are maximum and relative small; to analyze their dynamic characteristics as well as grade; and to compare them with maintenance history. As the dynamic characteristics of track, the vertical displacement and vibrating acceleration of sleeper as well as acceleration of ballast are measured/analyzed. Furthermore, by collecting soil and gravel on the reinforced roadbed and undertaking ballast screening test, the size distributions are compared with grade distribution standards of high speed railway.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 춘계학술대회 논문집
• /
• pp.303-310
• /
• 2001

The railroad under operation has very sharp curves and the state of ballast is somewhat deteriorated due to the traffic loads, which put some constraints in converting the conventional rails into CWR. In making CWR, the determination whether the ballast has sufficient capacity for resisting buckling must be made, quantitatively and qualitatively, and schemes to guarantee the required lateral resistance of ballast should be proposed. In this study, using the in-situ investigated data, the probability of buckling of CWR is given for several installation temperatures for CWR. The effect of tamping, DTS, and sleeper spacing are taken into account. The buckling probability is given as a function of curvature and installation temperature of CWR and works used to increase the ballast resistance capacity after tamping, i.e., DTS and reduction of sleeper sparing.