• Journal of Korean Society of Water and Wastewater
• /
• v.10 no.1
• /
• pp.85-95
• /
• 1996

Although the specific resistance to filtration is the most frequently employed means for characterizing dewaterability of a sludge, it presently is not possible to design nor to prediet performance of dewatering facilities using traditional linearized parabolic filtration equation, that is, the specific resistance model because of theoretical and practical inadequacies of the concept. Limitations of the specific resistance model reflect the need to examine fundamental sludge properties and filtration behaviors affecting dewaterability. From this study, two major limitations of the specific resistance model were noted. First, specific resistance values are very dependent on the sludge concentration because of the variations of particle size distribution and cake clogging to occur when surface area mean diameter is less than $25{\mu}m$ for activated sludge, $18{\mu}m$ for water treatment plant sludge. Second, nonparabolic filtration behavior can result from cake clogging, caused by the migration of fine particles into the cake pores, accelated by skin effect with highly compressible sludges.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.1
• /
• pp.155-161
• /
• 2014

This study presents the real-time emotion image contents player to induce the user's emotion efficiently. The emotion image contents player was designed to efficiently induce by giving a change in the color, brightness, saturation of image contents corresponded to the user's emotion. In the emotion recognition module, physiological signal of pulse, skin temperature, skin resistance which based on autonomic nervous system were used. The emotion recognition part used physiological signal of pulse, skin temperature, skin resistance based on autonomic nervous system. The image as emotional contents was used with the 9 kinds emotion area classified in international affective picture system(IAPS). As experimental results, the use's emotion that match the image's emotion with the emotion image contents player was derived 10% more accurately. The emotion contents player is expected to increase emotional feeling between users's emotion and contents emotion duo to the real-time emotion reflection.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.1
• /
• pp.93-103
• /
• 2005

Both static pile load test with load transfer measuring system and the pile dynamic load test are performed to estimate the skin friction and behavior characteristics of a large drilled shaft. And the numerical modeling of large drilled shaft is performed by applying the FDM program. Since the magnitude of friction resistance depends on the relative displacement between soil and shaft, load and displacement at the arbitrary depth along the large drilled shaft are estimated to analyze the correlation. According to the measuring results of load transfer, unit skin friction along the large drilled shaft was fully mobilized at gravel layer in the middle of shaft and the frictional resistance transmitted to bedrock was relatively small. Also, even for the same drilled shaft, the results of PDA and static load test are different with each other and the difference is discussed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.10
• /
• pp.5268-5273
• /
• 2013

Technique for analyzing pile installed by vibratory pile driver was developed and results of analysis obtained from variation of bias weight were studied. It can be seen from load transfer curve for dynamic skin friction that load transfer curve shift to downward as bias weight increases. Shape of load transfer curve for dynamic skin friction becomes closer to shape of coil as the bias weight decreases. Magnitudes of toe resistances were not affected by the bias weight. Shape of load transfer curve for dynamic toe resistance shows the similar tendency as the load transfer curve for skin friction exhibits. Vertical displacement increases as the bias weight increases and the shape of vertical displacement with time shows more distinct shape of wave.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.2
• /
• pp.165-168
• /
• 1999

To determine the effects of genetic and environmental influences on cell mediated immune (CMI) responses in broiler rabbits, contact sensitivity to 2,4-Dinitrochlorobenzene (DNCB) was assessed in three temperate broiler breeds of rabbits, namely Soviet Chinchilla, New Zealand White and Grey Giant. The feasibility of using the contact sensitivity to DNCB as a marker trait in selection for disease resistance was examined. There were highly significant differences between breeds (p<0.01) in initial skin thickness and contact sensitivities to DNCB at 24, 48 and 72 hours. Initial skin thickness was greatest in the Soviet Chinchilla breed (mean 2.2484 mm), and was significantly greater (p<0.01) in males (2.4963 mm) than in females (1.7846 mm) (p<0.01). Highest contact sensitivity to DNCB was in the New Zealand White breed with mean increase in skin thickness of 1.1884, 0.9072 and 0.5879 mm at 24, 48 and 72 hours post challenge respectively. Delayed type hypersensitivity (DTH) reaction to DNCB at 24 hours post challenge had a highly significant association (p<0.01) with the incidence of body mange in rabbits. The results indicated a lowered contact sensitivity to DNCB at 24 hours post challenge was associated significantly (p<0.01) with an increase in incidence and severity of body mange, suggesting its potential value as a marker. The correlation s among contact sensitivities at 24, 48 and 72 hours were positive and highly significant (p<0.01); correlations between initial skin thickness and contact sensitivities were negative and highly significant (p<0.01). Another notable significant correlation was between body weight and delayed type hypersensitivity at 24 hours indicating that an enhanced CMI might be associated with better growth rate and general wellbeing.

• Journal of the Korean Geotechnical Society
• /
• v.35 no.12
• /
• pp.7-13
• /
• 2019

In the case of the drilled shaft, one of the methods for calculating unit skin friction stress of rock socket parts is to measure the roughness of the excavated face. This method is to estimate the unit skin frictional resistance using a device which measures the roughness shape of the excavated face in the excavation step. In this study, the roughness shapes of the face of the rock socket part in the drilled shaft were measured directly in the perforated hole and the results are used to identify the characteristics of the unit skin friction of the bedrock. In addition, the static load test and the load transfer test were performed on the same pile to verify the result of the roughness test.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.17-24
• /
• 2005

Recently construction activities increase in reclaimed onshore areas. It is therefore considered an important factor for the design of pile foundation with problems in terms of settlements due to soft grounds. Nevertheless the design of piles for negative skin friction(or downdrag forces) is probably poorly understood by many engineers. It is mainly because the most of design specification give a way to design pile foundation in bearing capacity aspect although the negative skin friction is related to settlement(downdrag). Under LRFD(load resistance factor design) approach it is to separately consider ultimate limit state and serviceability limit state. This paper discusses LRFD approach to the design of piles for negative skin friction and compares this approach to traditional design approach. And also a case history is analyzed in that point of view.

• Journal of the Korean Medical Association
• /
• v.61 no.11
• /
• pp.655-661
• /
• 2018

Incidence of basal and squamous cell carcinoma is increasing among Korean. With increasing this incidence we need to attend the management and prevention of these cutaneous malignancies. Basal cell carcinoma (BCC) is the most common skin malignancy. Sun exposure is the most important environmental cause of BCC. Daily sun protection especially avoiding sun exposure between 10 a.m. and 4 p.m. provides most effective prevention against chronic ultraviolet-induced skin damage. Hedgehog pathway inhibitors are used locally advanced and metastatic BCC lesions in Korea. Until recently, there are no reports whether it developed resistance of Hedgehog pathway inhibitors with advanced BCC in Korean patients. Among malignant skin tumors, 19.1% were squamous cell carcinoma (SCC). The incidence of SCC was rapidly increased over the past years. However, the incidence rate of SCC in Japan has not been changed from the period 1976-1980 to 1986-1990. Sentinel lymph node biopsy for SCC did not provide diagnostic value. Bowen's disease and Erythroplasia of Queyrat are considered as carcinoma in situ of the skin. Erythroplasia of Queyrat have worse prognosis with a higher rate of malignant degeneration. Dermoscopy may helpful tool in assisting the noninvasive diagnosis of carcinoma in situ of the skin.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.20 no.4
• /
• pp.565-572
• /
• 1996

The purpose of this study was to measure partial heat resistance of Hanbok when it worn. Since Hanbok varies from season to season, four different set of Hanboks (R, SN, p and S) were tested. Also Durumagi (D) which is worn over Hanbok (5) to keep warm from winter cold was tested as well. The thermal manikin was used in this experiment. The room temperature, air velocity and the relative humidity was set at $20\pm0.5^{\circ}C$, 0.15 m/sec and $50\pm$5% respectively. The mean skin temperature of the manikin was set at $33\pm0.5^{\circ}C$. The results were as follows: 1. The order from the least total heat resistance to the most was SN, R, p, 5 and D. 2. Upper arms had the highest heat resistance among the 13 parts. The next was abdomen thighs, buttock, legs, forearms and chest, back, and head, the order from the most to the least.

• Journal of Welding and Joining
• /
• v.23 no.6
• /
• pp.55-60
• /
• 2005

In part 1. optimal process parameters such as thickness of stopper and welding time are achieved to produce high strength ISB(Inner Structured and Bonded) panels. Developed process is different from the usual resistance welding process in the number of points welded at a time. In part 2, Numerical modeling for this new process is proposed and the variation of contact area with respect to the gap of electrodes is studied through FE analyses, Besides, it is tried to figure out the welding nugget formation and proper distance between welding points. FE analytic results show that inner structures are melted more than skin plate, and current distribution between points to be welded can be controlled by distance welding points. Comparison of some FE analytic results with corresponding experimental results could confirm the validity of the proposed numerical modeling.