• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.51 no.7
• /
• pp.331-338
• /
• 2002

An inverter-fed induction is driven by a harmonic voltage source so that it is necessary to be analysed by time-stepping F.E.M. But it takes so long time that disadvantageous to design. This paper presents a simple analysis method for inverter-fed induction motor using FEM and harmonic equivalent circuit. First, the rotor bar resistance and the leakage reactance are determinated by FEA for 1 slot region in rotor to consider the skin effect and the saturation. Secondly, the characteristic of the motor is analyzed by the harmonic equivalent circuits consisting of the obtained parameters from the FEA. This method is carried out to analyze an induction motor driven by the sinusoidal voltage and the inverter. The results are verified by comparing with those of the time-step F.E.A and the experiment.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.10 no.4
• /
• pp.427-438
• /
• 2018

The reduction of $CO_2$ emissions has been a key target in the marine industry since the IMO's MEPC published its findings in 2009. Air lubrication method is one of the mature technologies for commercialization to reduce the frictional resistance and enhance fuel efficiency of ships. Air layer is formed by the coalescence of the injected air bubbles beyond a certain air flow rate. In this study, a model ship (${\lambda}=33.33$) of a 50,000 ton medium range tanker is equipped with an air lubrication system. The experiments were conducted in the 100 m long towing tank facility at the Pusan National University. By selecting optimal air injector configuration and distribution ratio between two injectors, the total resistance of model $R_{TM}$ was able to be reduced down to 18.1% in the model scale. Key issue was found to suppress the sideway leakage of injected air by appropriate injection parameters.

• Journal of the Korean Society of Safety
• /
• v.15 no.4
• /
• pp.56-61
• /
• 2000

The precise and reliable loss model for induction motor and converter system is very important in order to predict the efficiency performance of variable speed drives. This paper proposes an accurate loss model of induction motor and converter system. The motor losses, such as stator and rotor copper loss, core loss and stray loss, are considered for fundamental and harmonic frequencies. Also considered are the skin effect on rotor resistance, temperature effect on bath stator and rotor resistance, magnetizing inductance saturation, and friction and windage loss. All the above features are incorporated in a synchronous frame dynamic d-q equivalent circuit. The converter system, consisting of a diode rectifier and PWM transistor inverter, is modeled accurately for conduction and switching losses. Validity of the models, in both steady state and transient conditions, is verified by simulations.

• Proceedings of the KWS Conference
• /
• 1996.05a
• /
• pp.13-14
• /
• 1996

High Frequency Electric Resistance Welding process has been widely used in manufacturing welded steel pipes because of its high welding speed and quality. This process utilizes the skin effect as well as the proximity effect of the high frequency current in heating the skelp edge. In this study, an analytical solution of the edge temperature was obtained based on several assumptions. The assumptions includes the expontial decay of weldingcurrent from the surface and neglect of the heat loss in the welding direction. This calculation shows a good agreement with the observations made from the high speed camera. Using tile analytical model, tile heat required as a function of the welding speed and the skelp thickness was determined. These results were compared with the experimental results obtained.

• Journal of the Korea Institute of Building Construction
• /
• v.12 no.5
• /
• pp.510-517
• /
• 2012

This study evaluated the recycling potential of in-site waste soil as pile back filling material (PBFM). We performed experiments to check workability, segregation resistance, bond strength, direct shear stress test, and dynamic load test using in-site waste soil in coastal areas. We found that PBFM showed better performance than general cement paste in terms of workability, segregation resistance, and bond strength. On the other hand, the structural performance of PBFM was slightly lower than that of general cement paste due to the skin friction force of pile by Pile Driving Analyzer and direct shear stress. However, because this type of performance degradation in terms of structure can be improved through the use of piles with larger diameter or by changing the type of pile, considering the economics and environment, we considered that recycling of PBFM has sufficient value.

• Microbiology and Biotechnology Letters
• /
• v.49 no.4
• /
• pp.467-477
• /
• 2021

Staphylococcus aureus is a well-known pathogen that can cause diseases in humans. It can cause both mild superficial skin infections and serious deep tissue infections, including pneumonia, osteomyelitis, and infective endocarditis. To establish host infection, S. aureus manages a complex regulatory network to control virulence factor production in both temporal and host locations. Among these virulence factors, staphyloxanthin, a carotenoid pigment, has been shown to play a leading role in S. aureus pathogenesis. In addition, staphyloxanthin provides integrity to the bacterial cell membrane and limits host oxidative defense mechanisms. The overwhelming rise of Staphylococcus resistance to routinely used antibiotics has necessitated the development of novel anti-virulence agents to overcome this resistance. This review presents an overview of the chief virulence determinants in S. aureus. More attention will be paid to staphyloxanthin, which could be a possible target for anti-virulence agents.

• Microbiology and Biotechnology Letters
• /
• v.51 no.4
• /
• pp.545-547
• /
• 2023

Staphylococcus epidermidis is a normal flora of human skin and is occasionally associated with pathogenic infections. We report the complete genome sequence of methicillin-resistant Staphylococcus epidermidis strain Z0118SE0272 isolated from the residential environment sharing by a companion dog and dwellers. Resistance to cefoxitin was observed in the strain, whereas it was susceptible to erythromycin, clindamycin, quinupristin-dalfopristin, trimethoprim-sulfamethoxazole, mupirocin, vancomycin, teicoplanin, linezolid, and tigecycline. The strain Z0118SE0272 identified as sequence type 130 possessed the mecA gene responsible for methicillin resistance, which composed the new type of staphylococcal cassette chromosome mec elements lacking mecRI.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.8
• /
• pp.1-7
• /
• 1998

This paper reports a dispersion compensation technique to implement tje distortionless transmission line by satisfying the heaviside conditon. Because of the skin depth for aconductor, compensation condition is dependent on the freuqncy variation. For this reason, first, the resistance have been chaacterized in awide range of frequencies, and then found the effective conductivity of the substrate which satisfied the heaviside condition. The phase velocity and the characteristics impedance are prresented nearly constant over a wideband frequency range.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.2
• /
• pp.296-304
• /
• 2014

For this research, prepared polyurethane dispersion of hard segment type and polyethylene emulsion wax. Use these resin, this article has been analyzed about mechanical properties variation by increasing amount of polyethylene emulsion wax on Lam skin leather and dried film. According to measure data for solvent resistance, PUD had good property. As known in the results, increase of polyethylene wax constant did not influence to big variation of hybrid resin properties. As test of tensile strength, PUD had good tensile characteristic($1.235kg_f/mm^2$) and PUD-EW4 had lowest tensile characteristic($1.022kg_f/mm^2$). As same as tensile characteristic, abrasion test determined PUD(52.225 mg.loss) had highest properties. In elongation case, PUD showed 698 % modulus which was best properties in this experiment.

• The Korean Journal of Pain
• /
• v.12 no.1
• /
• pp.114-118
• /
• 1999

Backgrouds: Cervical epidural blocks were used as part of a comprehensive multimodal treatment program for patients with chronic pain in the head, neck and upper extremities. The depth of the epidural space beneth the skin surface varies at different levels of the spinal column in the same patient. It also varies from patient to patient at the same vertebral level. We studied the distance the skin to the cervical epidural space in adults patients at different intervertebral spaces. Methods: Date were gathered from 628 patients having cervical epidural block for relief of cervical and upper extrimity pain. All blocks were performed using hanging drop method after loss of resistance with saline at C5-6, C6-7, C7-T1 intervertebral space. Results: Mean distances for skin to cervical epidural space (DSES) were 5.42 cm, 5.06 cm, 4.68 cm in male, 5.00 cm, 4.61 cm, 4.10 cm in female at C7-T1, C6-7, C5-6 intervertebral space. DSES correlated with body weight, neck circumference and body mass index significantly. Conclusion: In the cervical spine, DSES varies from space to space. The longest DSES were noted at C7-T1 level in male, and the shortest DSES were at C5-6 in female. DSES has significant relationships with weight, neck circumference and body mass index.