• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.5
• /
• pp.364-371
• /
• 2017

TPMS is a vehicle electric system that measures the air pressure of a tire, and informs the driver of current tire states. The TPMS sensor typically uses unidirectional communication for small size, light weight, and low power. The transmission period of the sensor indicates the service quality of monitoring the tire. In order to determine the optimal transmission period, frame collision probability and the life time of the sensor should be analyzed. In this paper, collision probability model using Venn diagram is designed in low power TPMS with the normal and warning mode. And the life time and a collision probability were analyzed with the ratio(n) of the normal mode to warning mode transmission period. As a result, $T_{nP}=31sec$ and $T_{wP}=2.4sec$ at 5 years, and $T_{nP}=71sec$ and $T_{wP}=2.5sec$ at 7 years.

• Journal of Korean Society for Atmospheric Environment
• /
• v.21 no.6
• /
• pp.573-583
• /
• 2005

Fugitive dust, which is emitted in the ambient air without first passing through a stack or duct designed to control flow, is frequently generated by means of wind erosion from storage yards at Pohang Steel Wokrs. The size distribution of fugitive dust is mostly in the range of coarse particulate which is deposited as soon as emitted and less harm to human health; however $20\%$ of fugitive dust contains PM 10 known as one of most harmful airborne pollutant. Consequently, effective control and reduction of fugitive dust is strongly requested by the local society, but it is not easy so far because the generation and dispersion of fugitive dust highly depends on meteorological conditions, and it being occurred for irregularity. This research presented a fugitive dust control system for each meteorological condition by providing statistical prediction data obtained from a statistical analysis on the probability of generating the threshold velocity at which the fugitive dust begins to occur, and the frequency occurring by season and by time of the wind direction that can generate atmospheric pollution when the dispersed dust spreads to adjacent residential areas. The research also built a fugitive dust detection system which monitors the weather conditions surrounding storage yards and the changes in air quality on a real-time basis and issues a warning message by identifying a situation where the fugitive dust disperses outside the site boundary line so that appropriate measures can be taken on a timely basis. Furthermore, in respect to the spraying of water to prevent the generation of fugitive dust from the storage piles at the storage yard, an advanced statistical meteorological analysis on the weather conditions in Pohang area and a case study of fugitive dust dispersion toward outside of working field during $2002\∼2003$ were carried out in order to decide an optimal water-spraying time and the number of spraying that can prevent the origin of fugitive dust emission. The results of this research are expected to create extremely significant effects in improving surrounding environment through actual reduction of the fugitive dust produced from the storage yard of Pohang Steel Works by providing a high-tech warning system capable of constantly monitoring the leakage of fugitive dust and water-spray guidance that can maximize the water-spraying effects.

• The Korean Journal of Pesticide Science
• /
• v.10 no.1
• /
• pp.28-35
• /
• 2006

This study was conducted to optimize formulation factors of a self-dispersible floating granule of flucetoaulfuron that can be used at a low application volume (5 kg $ha^{-1}$). SPA and xanthan gum were selected as a binder because blending of them showed good granulation and floatation. Potassium chloride selected as a filler also showed good granulation, floatation and disintegration properties. Among wetters and dispersants, Surfynol 440 gave the best dispersibility The optimum granule size was determined to be 1.0 mm considering floating time and dispersibility. Flucetosulfuron was mixed with the blend of SPA and xanthan gum, potassium chloride, and Surfynol 440 and formulated as a floating self-dispersible granule at 1.0 mm in diameter. Indoor and outdoor field experiments showed that the floating granule of flucetosulfuron performed well, covering long range from the application spot up to 15 m in weed control. Therefore, this floating technology may be used for laborsaving herbicide formulation development and help to reduce workloads for herbicide application.

• Journal of Korea Multimedia Society
• /
• v.12 no.1
• /
• pp.31-40
• /
• 2009

Call centers have become the prevalent contact points between companies and their customers. By virtue of recent advances in communication technology, the number and size of call centers have grown dramatically. As a large portion of the operating costs are related to the labor costs, efficient design and workforce staffing are crucial for the economic success of call centers. Therefore it is very important to determine the adequate number of agents. In this context, the workforce staffing level can be modeled as mathematical optimization problem using queueing theory. In this paper, we deal with an approximate analysis of an N-design call center with two finite queues and two types of reneging customers by using the state decomposition method. We also represent some numerical examples and show the impact of the system parameters on the performance measures of the call center.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.3
• /
• pp.1853-1862
• /
• 2015

Naval maintenance system carries out repairs of battle ships. Korean Navy has four maintenance stations to maximize the readiness of the battle ships. Since each station can provide different services according to characteristics(specific size of ships, type of maintenances) and the maintenance ability of stations is predetermined, it has been one of complex problems for the Korean Navy to find the optimal resource allocation. We investigate the operation of the stations from the perspective of the human resource allocation which plays crucial role in the performance of the maintenance stations. Using a queueing model and optimization technique, we present a way to derive the optimal personnel allocation which minimize the waiting number of battle ships at each station, leading to the improvement of the military readiness in the Korean Navy.

• Current Research on Agriculture and Life Sciences
• /
• v.8
• /
• pp.95-106
• /
• 1990

The most important factors among extraction conditions in the extraction process of Barley and Casia tora seed are particle size, extraction temperature, time and initial concentration. In this research project, then, the amounts of extracted materials were measured at various conditions of above factors. They were increased as the particle sizes were decreased and were also increased in the proportional to the value of square of temperature. General mathematical prediction models were developed by an optimization technique for the amounts of extracted materials and extraction rate on the basis of each independent factor. Then, the final prediction model was obtained upon all the factors. As the results, it was also found that the values of overall mass transfer coefficients were increased as the particle sizes were decreased.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.5
• /
• pp.947-955
• /
• 2017

Herbicidin A is a potent herbicide against dicotyledonous plants as well as an antibiotic against phytopathogens. In this study, fermentation parameters for herbicidin A production in submerged culture of Streptomyces scopuliridis M40 were investigated. The herbicidin A concentration varied with the C/N ratio. High C/N ratios (>4) resulted in a herbicidin A production of more than 900 mg/l, whereas maximally 600 mg/l was obtained at ratios between 1 and 3.5. In 5-L batch fermentation, there was a positive correlation between the oxygen uptake rate (OUR) and herbicidin A production. Once the OUR increased, the substrate consumption rate increased, leading to an increase in volumetric productivity. Mechanical shear force affected the hyphal morphology and OUR. When the medium value of hyphal size ranged from 150 to $180{\mu}m$, high volumetric production of herbicidin A was obtained with OUR values >137mg $O_2/l{\cdot}h$. The highest herbicidin A concentration of 956.6 mg/l was obtained at 500 rpm, and coincided with the highest relative abundance of hyphae of $100-200{\mu}m$ length and the highest OUR during cultivation. Based on a constant impeller tip speed, which affects hyphal morphology, herbicidin A production was successfully scaled up from a 5-L jar to a 500-L pilot vessel.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.5A
• /
• pp.493-500
• /
• 2006

This paper presents the efficient structure and parameter optimization of downlink beamforming transmitter in OFDMA/TDD system. To design downlink beamforming transmitter for multiple transmit antennas, an efficient beamforming structure for multiple users and the choice of word-length of each block are critical in the aspect of its performance and hardware complexity. We propose an efficient beamforming scheme, which stores the weights of subcarriers into memory without user identification at the receiver of base station and calculates the weights for corresponding user in a subcarrier unit of IFFT input at high speed. Also, we obtain the word-length of main data path and other design parameters by fixed-point simulation analysis. The proposed architecture could reduce the memory size proportional to the maximum number of users per frame, and the processing time of an OFDM symbol at the receiver of base station without the need of additional processing time for calculating the weights at the transmitter.

• Resources Recycling
• /
• v.12 no.6
• /
• pp.19-25
• /
• 2003

This experiment was carried out to examine the effect of iron oxide roasting for Sr-ferrite magnet. Chloride content was decreased with raising the 2 nd roasting temperature of iron oxide for ruthner process iron oxide. The optimization temperature for roasting of ruthner process iron oxide was around $800^{\circ}C$ as average particle size 1.5∼1.9 $\mu\textrm{m}$, apparent bulk density 1.4 g/$m\ell$ and chloride content 0.05%. The relation between Br and HcJ by sintering temperature for Sr-ferrite magnet was found to be Br≒-0.258HcJ＋494. In case of having a vibrating disk mill for the ruthner process iron oxide, the magnetic properties were Br 421 mT and HcJ 251 kA/m.

• Journal of the Korean Society for Railway
• /
• v.10 no.6
• /
• pp.742-750
• /
• 2007

This paper presents a mathematical model for a double-fleet operation in Korean high speed rail (HSR). KORAIL has a plan to launch new HSR units in 2010, which are composed of 10 railcars. The double-fleet operation assigns a single-unit or two-unit fleet to a segment, accommodating demand fluctuation. The proposed model assumes stochastic demand and uses chance-constrained constraints to assure a preset service level. It can be used in the tactical planning stage of the rail management as it includes several real-world conditions, such as the capacities of the infra-structures and operational procedures. In the solution approach, the expected revenue in the objective function is linearized by using expected marginal revenue, and the chance-constrained constraints are linearized by assuming that demands are normally distributed. Subsequently, the model can be solved by a mixed-integer linear programming solver fur small size problems. The test results of the model applied to Friday morning train schedules for one month sample data from KTX operation in 2004 shows that the proposed model could be utilized to determine the effectiveness of double-fleet operation, which could significantly increase the expected profit and seat utilization rates when properly maneuvered.