• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.2
• /
• pp.235-253
• /
• 2018

Groundwater flow induced by cracks in a buried pipe causes ground loss in the vicinity of it which can lead to underground cavities and sinkhole problems. In this study, the ground collapse mechanism and the failure mode based on an aperture in the pipe located in cohesionless ground were investigated through a series of physical model studies. As the influence parameters, size of the crack, flow velocity in the pipe, groundwater level, ground cover depth and ground composition were adopted in order to examine how each of the parameters affected the behavior of the ground collapse. Influence of every experimental condition was evaluated by the final shape of ground failure (failure mode) and the amount of ground loss. According to the results, the failure mode appeared to be a 'Y' shape which featured a discontinuous change of the angle of erosion when a groundwater level was equal to the height of the ground depth. While in the case of a water table getting higher than the level of ground cover depth, the shape of the failure mode turned to be a 'V' shape that had a constant erosion angle. As the height of the ground depth increased, it was revealed that a mechanism where a vertically collapsed area which consisted of a width proportional to the ground height and a constant length occurred was repeated.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.22
• /
• pp.9949-9953
• /
• 2014

Objective: To evaluate the long term results among patients with soft tissue sarcoma of the thoracic wall. Materials and Methods: Twenty-six patients who were treated with pre-or postoperative radiotherapy between December 1980-December 2007, with a diagnosis of soft tissue sarcoma of the thoracic wall were retrospectively evaluated. Results: The median age was 44 years (14-85 years) and 15 of them were male. A total of 50% of patients were grade 3. The most common histologic type of tumor was undifferentiated pleomorphic sarcoma (26.9%). Tumor size varied between 2-25 cm (median 6.5 cm). Seventeen of the cases had marginal and 9 had wide local resection. Four cases received preoperative radiotherapy and 22 postoperative radiotherapy. Six of the patients with large and high grade tumors received chemotherapy. Median follow-up time was 82 months (9-309 months). Local recurrence and metastasis was detected in 34.6% and 42.3% of patients, respectively. Five-year local control (LC), disease-free survival (DFS), overall survival (OS), and disease-specific survival (DSS) were 62%, 38%, 69%, and 76% respectively. On univariate analysis, the patients with positive surgical margins had a markedly lower 5-year LC rate than patients with negative surgical margin, but the difference was not significant (43% vs 78%, p=0.1). Five-year DFS (66% vs 17%) and DSS (92% vs 60%) rates were significantly worse for the patients who had high grade tumors (p=0.01, p=0.008 respectively). Conclusions: Tumor grade and surgical margin are essential parameters for determining the prognosis of thoracic wall soft tissue sarcoma both in our series and the literature.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.17 no.4
• /
• pp.3897-3920
• /
• 1975

Since the most of Korean dairy and cattle raising farms are too small to introduce western mechanized farming, it is necessary to develope small size equipments. This study has been carried to develop a rotary mower as on attachment of 8 to 10 horse powertiller which is widely spread in rural area. It will not ony be helpfull for the farmers to harvesting hay grass but also desirable to increase the power tiller utility. The protto type rotary mower designed through the fundamental investigations, has been modified and improved through the field trials, and a series of field tests has been carried to investigate its performance and economic feasibility comparing with existing vailable harvesting equipments. The results are as follows; 1. To increase the stability, two guide wheels are attached to both side of the protto type rotary mower. 2. To prevent the clinging of tall grasses, the vertical driving shafts are covered with cylindrical protectors. 3. The cutting height is adjustable in 8 steps from 2.5 to 20 centimeters by changing the length of guide wheel legs. 4. The practical Critical cutting speed were always higher than theoretical value in both case of single cutting blade and three when the cutting depth was 25 millimeter. 5. The peripheral speed of cutting blade was varied in response to the change of engine speed, mean while the peripheral speed was adequate as it was changhed from 25 to 35 meter per second when the power tiller is operated in proper working ground speed. 6. The time requirement to harvest 10 a were 88.7, 54.6 and 41.4 minutes for the first, second and third stage of ground speed respectively, and because of the difficulty of delivery, it was observed that operating with fourth stage of ground speed was not recomanendable when the grass height is taller than 90 centimeters. 7. The performance of rotary mower were 1.1-1.7, 1.4-4.0, 3.8-11.8 and 7.4-22.0 times of reciprocating mower, portable disc type cutter, hay scythe and ordinary sickle respectively. 8. When the slope exceeds, 20 degree the downward harvesting operation was impossible because of the excessive front end weight, while less than 5 degree of land slope did not effect in field operation. 9. Increased traveling spee caused higher cutting height and slight cutting failure, but seems not to effect to the gross yield, and the efficiency of cutting width were from 83 to 94 precent. 10. Tn rank of economy were rotary mower (3,2 stage operation), reciprocating mower, hay scythe, portable disc type cutter and sickle in order when the annul operation exdeeds 100 hours. From the above results, it is convinced that the protto type rotary mower is good enough to the livestock farmers as a hay harvesting equipment because of its economy, hardiness in operating and its out standing performance and hopefully it will contribute to the extension of Korean livestock farming.

• The Korean Journal of Pharmacology
• /
• v.24 no.1
• /
• pp.43-52
• /
• 1988

To elucidate the mechanism of action of local anesthetics, the effects of local anethetics on the microenvironment of the lipid bilayers of synaptosomal plasma membrane vesicles (SPMV) isolated from bovine brain and dimyristoylphosphatidylcholine (DMPC) multilamellar liposomes were investigated employing the intermolecular excimer fluorescence technique and differential scanning calorimetry (DSC). The relative intensities of excimer and monomer fluorescence of pyrene are a simple linear function of the viscosity of a homologous series of solvents. The microviscosity(${\eta}$)of the hydrocarbon region of SPMV was measured by this method and the value was $57.3{\pm}5.3\;cP$ at $37^{\circ}C$. In the presence of lidocaine-HCl and procaine-HCl, the values decreased to $46.5{\pm}5.1\;cP$ and $54.7{\pm}4.8\;cP$, respectvely. The differential scanning thermograms of DMPC multilamellar liposomes showed that local anesthetics significantly lowered the phase transition temperature, broadened the thermogram peaks, and reduced the size of the cooperative unit. These results indicate that local anesthetics have significant fluidizing effects on biomembranes and perturbation of membrane lipids may produce some, but not all, of their pharmacological actions.

• Journal of Navigation and Port Research
• /
• v.30 no.6 s.112
• /
• pp.439-446
• /
• 2006

In ship structures many of the structural plates have cutouts, for example, at inner bottom structure, girder, upper deck hatch, floor and dia-frame etc. In the case where a plate has a cutout it experiences reduced buckling and ultimate strength and at the same time the in-plane stress under compressive load produced by hull girder bending will be redistributed In general, actual ship structure adopted reinforcement of stiffener around the cutout in order to preventing from buckling so it need to examine a buckling and ultimate strength behaviour considering a cutout because In many ship yards used class rule for calculating buckling strength but it is difficult to evaluate perforate stiffened plate with random size. In the present paper, we investigated several kinds of perforated stiffened model from actual ship and then was performed finite element series analysis varying the cutout ratio, web height, thickness and type of cross-section using commercial FEA program(ANSYS) under compressive load.

• Korean Journal of Construction Engineering and Management
• /
• v.18 no.4
• /
• pp.57-66
• /
• 2017

Using bidding data collected from the World Bank's open database, this research performed a series of competitive analyses of the major countries that have participated in the Bank's engineering consulting services contracts in Vietnam. The goal of the analysis was to evaluate the performance of Korean engineering firms to date, and provide strategic recommendations for future projects. Results showed that Korean firms had a high bid acceptance rate, comparable to major developed countries. The success was attributed to the high technical scores in the selection process. Comparatively, financial scores were not competitive and inferior to developing countries such as China and India. Results of a 'Skitmore' analysis revealed that Korea was competitive in medium size projects and were situated between developed and developing countries. Korea thus needs to increase participation in basic and detailed design services, 2) improve labor costs through 'localization' and latest technologies, and 3) and venture into larger sized projects.

• The KIPS Transactions:PartB
• /
• v.14B no.7
• /
• pp.531-540
• /
• 2007

In this research, we proposed a two-phase hybrid stock price forecasting model with cointegration tests and artificial neural networks. Using not only the related stocks to the target stock but also the past information as input features in neural networks, the new model showed an improved performance in forecasting than that of the usual neural networks. Firstly in order to extract stocks which have long run relationships with the target stock, we made use of Johansen's cointegration test. In stock market, some stocks are apt to vary similarly and these phenomenon can be very informative to forecast the target stock. Johansen's cointegration test provides whether variables are related and whether the relationship is statistically significant. Secondly, we learned the model which includes lagged variables of the target and related stocks in addition to other characteristics of them. Although former research usually did not incorporate those variables, it is well known that most economic time series data are depend on its past value. Also, it is common in econometric literatures to consider lagged values as dependent variables. We implemented a price direction forecasting system for KOSPI index to examine the performance of the proposed model. As the result, our model had 11.29% higher forecasting accuracy on average than the model learned without cointegration test and also showed 10.59% higher on average than the model which randomly selected stocks to make the size of the feature set same as that of the proposed model.

• The Korea Journal of Herbology
• /
• v.21 no.2
• /
• pp.109-119
• /
• 2006

Objectives : This study was performed to approach of properties-flavours theory and the study of morphological standard in CORNI FRUCTUS. Methods : The properties-flavours theory were attempted with bibliographic method and various climate-information. The external-internal morphological standards were determined by using stereoscope and butanol series. Results and conclusion : 1. The significant analysis for the corni fructus as the properties-flavours theory, is a follow-up survey of the effect written in the official oriental medicine book. 2. The other analytic methods according to the gathering time, processing or storing system or especially nature or growth environment(altitude, temperature,. the mean moisture, and the agronomical survey) by way of the explanation of properties-flavours theory appears so many insufficiency at the many cases. 3. The external and internal characteristics according to the shape of original plant or herbal states, entirely correspond to all the literature on this subject. 4. According to the place of production, there are some different points. (l) In the external shapes, it is reasonable that if we make the basic standard of classification by the sharpness of color, the existence of gloss and the size of products. In the case of the Korean products, it shows bright and glossy color totally, but in the case of North Korea products, it shows black and lackluster. And in the case of the foreign products, it has softer body than Korea one and shows white color on the surface. (2) In the internal shapes, the Korea products has a thicker cuticle layer than the foreign one, and has fewer ca-oxalate in the parenchyma cell.

• Journal of the Korean Chemical Society
• /
• v.32 no.1
• /
• pp.53-59
• /
• 1988

Recently, the formation of the complexes between macrocyclic polyethers and alkali metal salts have been determined by several methods. It has been suggested that the specificity of the complexation be due to the nature of the surrounding solvent molecules. The formation constant values ($K_f$) of $K^+$ are shown to be the largest among the other alkali metal cations because the ionic diameter of $K^+$ is approximately the same with the hole size of 18-crown-6. In this study the formation constants of the 1 : 1 complexes of 18-crown-6 with potassium p-substituted phenoxide are calculated by the conductance measurement in organic solvents. As a result, the $K_f$ value series among organic solvents are given in the order of $CH_3$OH > DMF > DMSO. It seems that the donor number of the solvent is a main factor in the formation of the complex between $K^+$ metal ion and 18-crown-6 molecules. At the same time, the formation constants increase with increasing the electron-withdrawing power of substituents because the phenoxide ion is stabilized by the charge dispersion.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.2
• /
• pp.237-246
• /
• 2008

The cross-sections of continuous multi-span beams sometimes suddenly increase, or become stepped, at the interior supports of continuous beams to resist high negative moments. The three-dimensional finite-element program ABAQUS (2006) was used to analytically investigate the inelastic lateral-torsional buckling behavior of stepped beams subjected to pure bending moment and resulted in the development of design equations. The flanges of the smaller cross-section were fixed at 30.48 by 2.54 cm, whereas the width and/or thickness of the flanges of the larger cross-section varied. The web thickness and height of beam was kept at 1.65 cm and 88.9 cm, respectively. The ratios of the flange thickness, flange width, and stepped length of beams are considered analytical parameters. Two groups of 27 cases and 35 cases, respectively, were analyzed for double and single stepped beams. The combined effects of residual stresses and geometrical imperfection on inelastic lateral-torsional buckling of beams are considered. First, the distributions of residual stress of the cross-section is same as shown in Pi, etc (1995), and the initial geometric imperfection of the beam is set by central displacement equal to 0.1% of the unbraced length of beam. The new proposed equations definitely improve current design methods for the inelastic LTB problem and increase efficiency in building and bridge design. The proposed solutions can be easily used to develop new design equation for inelastic LTB resistance of stepped beams subjected to general loading condition such as a concentrated load, a series of concentrated loads or uniformly distributed load.