• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제21권1호
• /
• pp.60-64
• /
• 1999

Recently, for the reconstruction of bony defect and cosmetic improvement, many graft materials and implants have been widely used in the various surgical situations. The alloplastic materials have many advantages such as simplicity of operation, no additional need of surgery, and easy manipulation. The $Medpor^{TM}$(porous high-density polyethylene, Porex Co., USA) was initially studied in 1972 for surgical implant and introduced as an implant material for oral and maxillofacial region by Sauer and King in 1988. This material permits full ingrowth of bone into the implants, substantially increasing the implant's incorporation into the recipient site. It can be shaved during the surgery, which results in an improvement and prefabricated various size and shapes to fit into the surgical defect. The $Medpor^{TM}$ was used in 32 patients from 1995 to 1997 at the maxillofacial region. It was used for paranasal augmentation in 24 cases, for malar augmentation in 2 cases, for infraorbital augmentation in 2 cases, for mandibular angle augmentation in 2 cases, for mandibular body augmentation in 2 cases, for chin vertical augmentation in 1 case. It was mainly fixed with miniplate or screw. There were few complications except one infection and one exposure of the implant.

• 한국지반공학회논문집
• /
• 제21권5호
• /
• pp.133-142
• /
• 2005

본 연구는 지난 5년간 개발해온 인홀 발진자를 터널 막장의 강성도 계측에 사용가능하도록 개선하는데 주력하였다. 프로브는 터널의 폭파를 위해 점보드릴로써 천공된 직경 45m의 홀에 맞추기 위하여 소형화되었다. 또한 트리거 시스템은 감속모터를 사용함으로서 편리하게 되었고, 에어 팩킹 시스템은 압축공기 없이 사용하기위한 플레이트 스프링으로 교체하였다. 이러한 개선은 프로브를 터널내부의 환경에 적합하게 만들고 추가되는 비용 없이 실험하기 위함이다. 프로브와 테스트 과정은 암반의 강성을 측정하기 위해 터널의 막장의 수평 홀에 성공적으로 적용되었다. 측정된 전단파 속도는 터널 해석을 위한 암반의 변형 특성을 측정하는 것에 사용될 수 있다.

• 대한조선학회논문집
• /
• 제44권4호
• /
• pp.379-388
• /
• 2007

Ever increasing fuel prices and environmental concerns are forcing commercial vessel operators and designers to re-assess current vessel designs with an emphasis on their propulsion systems. The most important parameter determining propulsive efficiency is the diameter of propeller. Many investigations have been carried out to adapt a large and slow turning propeller known as one of the most robust and effective way of achieving high efficiency in ship propulsion system. However, for the same vessel a further increase of propeller diameter would require the modification of the aft end while still paying attention to the hull clearance to prevent excessive propeller excited vibrations. In order to take the advantage of this approach small workboats (e.g. tug boats, fishing vessels etc.) operate in service with a significant increase of aft draught and hence resulting "inclined keel" configuration can be observed. Although it is not unusual to see large vessels sometimes to operate with stern trim to improve their operational performance and fuel efficiency, it is rare to see a such vessel purposely built with an inclined keel feature to fit a large diameter propeller for power saving. This paper investigates the application of the inclined keel configuration to a 3600TEU container vessel with the aim of fitting an 11 % larger diameter propeller (and hence resulting 17.5 % lower rpm) to gain further power saving over the similar size basis container ship with conventional "level keel" configuration.

• 복식문화연구
• /
• 제10권2호
• /
• pp.200-212
• /
• 2002

The purpose of this study is to make the internet website on the order-made fashion design so as to do meet the need of netizen in the 21st century. It made the consumer do the design which he or she wants by the combination of the compositions that do select the pattern of the skirt design to fit his or her size and body shape. For the set-up of website, the elements of composition must be considered, and also the planning and design must be done fur the order-made fashion design. With the internet website, it's possible to do reach the below points; first, it can make the consumer do the design which he or she wants by himself or herself; second, it can provide him or her the information of measuring his or her body shape to buy the design pattern which he or she wants. Third, it can be contributed to make the brand more active by improving his or her satisfaction with the design and pattern which he or she wants. Also it can bring up the effects as fellows; first, lashing power of the design can be increased by the order-made fashion design to attract his or her interest, and also it can make him or her more satisfied. Second, the competitiveness can be strengthened by the differentiation of the fashion site between the existing design and the order-made fashion design. Third, the production of design can be higher and also its expense can be reduced even for the small and medium-sized clothes maker or merchants. Finally, it is able to enlarge the applicable field into the design of small articles, home fashion, and textile which they want to sell the differentiated and order-made products.

• 대한가정학회지
• /
• 제37권11호
• /
• pp.49-58
• /
• 1999

This study is to develop the well-fit brassieres by observing the changes in the breast sizes and shapes, the surface area of the breast through the arm movements of 3 types (0$^{\circ}$ , 90$^{\circ}$ and 180$^{\circ}$) in vortical motion. The 11 elementary girls who are aged 12 participated in this experiment. To obtain the measures regarding the surface area of the breast, replicas are made at each motion. The results of this study are as fellows: 1. The changes in the breast sizes and shapes at each motion By increasing the motions of the arm movement, the following measure items are inclined to decrease: Shoulder length, Upper blast girth, Bust girth, Under bust girth, Upper bust depth, Bust depth, Under bust depth, Nipple to nipple breadth, Horizontal distance of bust, Horizontal length of the cup, Bust height, Cup size. By increasing the motions of the arm movement, the fellowing measure items are inclined to increase: Center point of shoulder~B.p., Shoulder point~B.p., Center point of shoulder~armpit, Upper Bust breadth, Bust breadth, Under bust breadth, Vertical distance of Bust. 2. The changes in the surface area of breast at each motion By making the replica to observe changes in the surface area, which are sectioned to 4 parts(area 1 to area 4), and volume of breast at each motion, the results are as follows: At 0$^{\circ}$and 180$^{\circ}$, the sizes of each part are ordered as the following: area2>area1>area4> area3. At 90$^{\circ}$, the sizes of each part are ordered as the following: area2>area1>area3>area4. Through these orders, it is found that the upper and inside part of the breast huts the inclination to increase so along as the motions of the arm movement increase. Also, the total surface area increases so long as the motions of the arm movement increase. As a reset of the F-test on the changes in the each surface areas, the surface area by arm movements, the significant differences among the each surface areas are found.

• Advances in biomechanics and applications
• /
• 제1권2호
• /
• pp.95-109
• /
• 2014

Peri-acetabular bone ingrowth plays a crucial role in long-term stability of press-fit acetabular cups. A poor bone ingrowth often results in increased cup migration, leading to aseptic loosening of the implant. The rate of peri-prosthetic bone formation is also affected by the polar gap that may be introduced during implantation. Applying a mechano-regulatory tissue differentiation algorithm on a two-dimensional plane strain microscale model, representing implant-bone interface, the objectives of the study are to gain an insight into the process of peri-prosthetic tissue differentiation and to investigate its relationship with implant-bone relative displacement and size of the polar gap. Implant-bone relative displacement was found to have a considerable influence on bone healing and peri-acetabular bone ingrowth. An increase in implant-bone relative displacement from $20{\mu}m$ to $100{\mu}m$ resulted in an increase in fibrous tissue formation from 22% to 60% and reduction in bone formation from 70% to 38% within the polar gap. The increase in fibrous tissue formation and subsequent decrease in bone formation leads to weakening of the implant-bone interface strength. In comparison, the effect of polar gap on bone healing and peri-acetabular bone ingrowth was less pronounced. Polar gap up to 5 mm was found to be progressively filled with bone under favourable implant-bone relative displacements of $20{\mu}m$ along tangential and $20{\mu}m$ along normal directions. However, the average Young's modulus of the newly formed tissue layer reduced from 2200 MPa to 1200 MPa with an increase in polar gap from 0.5 mm to 5 mm, suggesting the formation of a low strength tissue for increased polar gap. Based on this study, it may be concluded that a polar gap less than 0.5 mm seems favourable for an increase in strength of the implant-bone interface.

• 한국농촌건축학회논문집
• /
• 제18권3호
• /
• pp.9-16
• /
• 2016

This study aimed to clarify the multifunctional services and space composition in the process of developing a multifunctional long-term care program in small elderly care facilities in Japan. We collected data about multifunctional long-term care at small facilities from the Community Life Support Center (CLC), a Japanese non-profit corporation, and conducted an interview survey of the members of the CLC's secretariat in 2014. Furthermore, we selected 3 Japanese pioneering care facilities (known as takurosho), and conducted interview surveys and data collection to clarify in detail the space composition and process of development of multifunctional long-term care at small facilities. Four distinct results were found. First, the facilities had gradually increased non-institutional services, including visitation, overnight stays, and long-term stays, to fit the needs of users and their families. Secondly, in the 1990s, they could offer both non-institutional and institutional services at the same facility, but after the long-term care insurance system began in 2000, non-institutional long-term stay services were not allowed. Third, the facilities had built extensions or extra rooms in response to increases in multifunctional services and users. These rooms had common characteristics, with sitting rooms at the center of the facility. Lastly, the maximum number of service users at each of the 3 facilities was limited to 15, to maintain a small scale. However, as the size of facilities was increased through building extensions or remodeling, the overall amount of area available to users increased.

• 패션비즈니스
• /
• 제19권2호
• /
• pp.85-102
• /
• 2015

This study aimed to develop dress torso patterns with both aesthetic and functional qualities that fit for women in their 20s. In order to develop dress torso patterns, wearing tests were done. By collecting drafting methods of the patterns through literature study and the survey of wedding dress manufacturers, four kinds of dress torso patterns were selected. The existing dress torso patterns have no or very small ease in chest, waist, and hip circumferences. As a result of wearing tests of these four existing dress torso patterns, drafting methods of dress torso patterns that have the best satisfied values close to optimum zero were selected; the first and second research dress torso patterns were developed by modifying and supplementing items that had noticeable difference through the Wilcoxon rank sum test with a selected measured value and a best satisfied value of zero; and deduced a drafting method for the final developed dress torso patterns by a wearing test of the second developed dress torso patterns. Distinctive aspects of drafting methods of the final developed dress torso patterns were that ease for each area was given differently by considering a functional quality and a chest circumference instead of a bust circumference was applied to reduce influence by the size of breast in neck and armhole areas, and a back bust level. Back neck breadth was made wider and front neck breadth was made less narrow due to a recent change of age 20s female adults' shoulder and back shape.

• 한국산학기술학회논문지
• /
• 제18권6호
• /
• pp.464-469
• /
• 2017

유도전동기 회전자는 rotor core를 일정한 높이로 쌓은 후 rotor core slot에 Cu bar를 열박음(shrinkage fit)작업으로 고정한 후 Cu bar 표면을 punch로 길이방향, 원주방향으로 순차적으로 압입(swaging)하여 제작된다. 본 연구에서는 Cu bar 표면을 압입할 때 Cu bar 표면에 발생하는 압입깊이, 잔류응력 분포 그리고 rotor core slot과 Cu bar 접촉면에 작용하는 접촉력(contact force)을 평가하고자 하였다. 한편 실제의 압입작업은 복잡한 3차원 문제이나 수치해석적인 접근을 위하여 단순화된 2차원 cyclic symmetry 해석모델을 개발하였으며 이러한 해석모델을 사용하여 일정한 압입압력에서 4가지 종류의 Cu bar 형상에 대하여 압입량과 접촉력을 평가하였다. 탄소성 수치해석 결과 1) sample Cu bar block model을 사용하여 단순화된 2차원 수치해석 모델을 개발하였고 2) rotor core 압입작업시 일정한 압입압력에서 Cu bar 표면의 압입량은 Cu bar 형상에 크게 관계없이 거의 일정하며 3) 압입작업시 punch에 가해지는 압입압력으로부터 rotor core slot과 Cu bar 접촉면에 작용하는 총 접촉력을 추정할 수 있는 근사식을 제안하였다.

• 정보처리학회논문지A
• /
• 제14A권6호
• /
• pp.357-362
• /
• 2007

클러스터와 같은 분산 시스템에서 초기 작업 배치 시, 할당할 프로세스의 자원 요구량을 정확히 예측하여 작업을 분배할 수 있다면 보다 나은 시스템 성능을 얻을 수 있게 된다. 이 때 임의의 작업을 적절한 호스트에 배치하기 위해서 자원 기반 초기 작업 배치 (resource-based initial job placement) 기법은 그 작업의 자원 사용량을 미리 예측할 필요가 있다. 하지만 잘못된 자원 예측은 동적 부하 분산 시스템의 성능을 크게 떨어뜨리는 원인이 된다. 따라서 본 논문에서는 잘못된 예측에 의한 문제를 해결하기 위해 새로운 부하 기준을 제안한다. 새로운 부하 기준을 사용한 자원 기반 초기 작업 배치 기법은 프로세스의 유형에 관한 사전 지식 없이도 동작하는 장점을 가진다. 실험을 통해 본 논문은 동적 부하 분산 시스템에서 제안하는 방식이 기존의 방식에 비해 향상된 성능을 가짐을 보인다.