• Journal of Technologic Dentistry
• /
• v.35 no.1
• /
• pp.57-64
• /
• 2013

Purpose: Waste parts of zirconia blocks and powders were remained after CAD/CAM process. In order to make these residual zirconia fit for practical use, zirconia single cores were produced by drain casting process. Methods: Remained zirconia blocks were reduced to powders with zirconia mortar, and screened with 180 mesh sieve. Zirconia slip was prepared from waste parts of zirconia by ball milling. Plaster molds for forming cores by slip casting were also prepared. Formed cores were removed from mold after partial drying. Dried cores were biscuit fired at $1,100^{\circ}C$ for 1hour. Biscuit fired cores were treated with tools to control the fitness and thickness. Finished cores were $2^{nd}$ fired at $1,500^{\circ}C$ for 1hour. Microstructure of cross section of core was observed by SEM. Results: When mill pot was filled with 100g of zirconia and alumina mixed powder, 300g of zirconia ball, and 180g of distilled water, the optimum slip for drain casting was obtained. Gypsum plaster for ceramic forming was more suitable then yellow stone plaster for casting process. SEM photograph showed the microstructure of fully dense with uniform grain size of zirconia and well dispersed alumina grains into the zirconia matrix. Conclusion: Zirconia single cores were produced by drain casting process. Drain casting is useful process to make these residual zirconia fit for practical use. Further study will be focused on the preparation of the bridge type cores by casting.

• Fashion & Textile Research Journal
• /
• v.7 no.6
• /
• pp.577-584
• /
• 2005

The aims of this study are primary data offer to silver fashion enterprise. In order to deduce design from diverse needs of silver generation, this study is required expert knowledge. For this purpose, this study applied two rounded Delphi method in which 31 experts. As a result, the following findings were obtained; From the previous studies, we found the physical changes of women in silver generation; i.e. the size of their waist and abdomen gets larger, their breasts are sagging, their limbs are thinner, upper body is bending, their height and weight get shorter and lighter. Their choice criterion of design of clothing is hide their weak points in body, youthfulness, moderate, and fashion style. Youthful design but patterns should agree with their body line so that they should be easily fit and look young. They like a jacket and pants set best regardless of spring or summer and as upper garment, they like semi fit, as pants, they prefer straight line of ankle length, and as skirts, partial elastic band and pleats, and the length of the skirts just cover their knees. This pattern in choosing their clothes represents they consider functionality as well as the aesthetics. Their preferred color for spring is lt/pink, lt/violet lt/green for summer, white and blue. Their preferred materials are wool/poly/spandex and cotton/spandex for functionality for spring, and for summer, linen poly and cotton poly seersucker for cool feeling and stability. In both top and bottom item, solid pattern follows small one in their preference on patterns, which shows that they are in pursuit of an elegant style. Our research based on this survey tries to establish what the fashion design for the silver generation should take into consideration.

• Fashion & Textile Research Journal
• /
• v.15 no.6
• /
• pp.971-976
• /
• 2013

This study provides insight into current social media influences and purchasing power of the young generation in that the size of both of these demographic groups will impact the apparel companies and retail market for the predictable future Denim apparel companies are aware of the discretionary spending power of the Y and Z Generations. The characteristics of current teens are so similar to college-age individuals in that they have grown up with digital technology and they prefer to communicate via social networking sites. Retailers have utilized these social media platforms in order to capture the attention of the generations. Traditionally marketing campaigns have differentiated between teens and the college-age population. However, the teens actually have larger spending power and more discretionary income. A survey consisted of 32 questions pertaining to Internet media influences, influence of people, and decision factors on decisionmaking related to purchasing selection. A random sampling of 163 females responded to a set of questionnaires. Teens, like college students desire to make their own decisions when they select and purchase denim jeans. Overall 40% of them wanted to make their own decisions when purchasing their jeans, however, a significant number are influenced by their friend's opinions (34%) and the opinions of family members (15%). However, celebrities (10%) had the least influence on their decisions. Teens, like colleges students make decisions based on the same decision factors: fit (63%), cost (23%), brand (10%) and color (2%). The most important factor in determining preference was "fit".

• Journal of The Korean Society of Agricultural Engineers
• /
• v.50 no.3
• /
• pp.17-27
• /
• 2008

In this study, three different unit hydrograph methods (Snyder, SCS, Clark) in the HEC-HMS were compared to find better fit with the observed data in the small agricultural watershed. Baran watershed, having $3.85km^2$ in size, was selected as a study watershed. The watershed input data for HEC-HMS were retrieved using HEC-GeoHMS which was developed to assist making GIS input data for HEC-HMS. Rainfall and water flow data were monitored since 1996 for the study watershed. Fifty five storms from 1996 to 2003 were selected for model calibration and verification. Three unit hydrograph methods were compared with the observed data in terms of simulated peak runoff, peak time and total direct runoff for the selected storms. The results showed that the coefficient of determination ($R^2$) for the observed peak runoff was $0.8666{\sim}0.8736$ and root mean square error, RMSE, was $5.25{\sim}6.37\;m^3/s$ for calibration stages. In the model verification, $R^2$ for the observed peak runoff was $0.8588{\sim}0.8638$ and RMSE was $9.57{\sim}11.80\;m^3/s$, which were slightly less accurate than the calibrated data. The simulated flood hydrographs were well agreed with the observed data. SCS unit hydrograph method showed best fit, but there was no significant difference among the three unit hydrograph methods.

• Korean Journal of Human Ecology
• /
• v.23 no.6
• /
• pp.1191-1204
• /
• 2014

Even though a Han-bok, or traditional Korean costume, should be inherited since it is invaluable part of our culture, research on Han-bok is scarce. Since the development of a Jeogori pattern, the upper garment of Korean traditional clothes, is done mostly based on the chest size, the design does not completely consider on wearer's body shape. Moreover, unless made by an expert, trial and error is almost always necessary to improve the fit of the clothes. In this research, a Jeogori pattern was suggested that improves the fit based on the shape of the upper back(straight or bent) of a female in her late 20s who often wears a Han-bok and is comfortable when moving. Using a 3D virtual clothing system, the optimum pattern was selected based on the body shape. The final selection was made, and each subjects tried the garment on to evaluate the comfort when moving, along with its appearance, based on a seven point Likert scale. As a result, for a straight body shape, the optimum ease for the front bust width was 2.5cm, and that for the back bust width was 2.0cm. The optimum center back dart was 1.0cm. The optimum Geodae width was 7.6cm, and the optimum back Geodae point was 2.0cm. For the bent body shape, the optimum ease for the front and back bust was 2.0cm. The optimum Geodae width was 8.4cm, and the optimum back Geodae point was 1.5cm. Furthermore, if the Hwajang slope was set at half of the vertical distance between the laterals of the neck and shoulder, a fitted silhouette appeared, which is preferred nowadays. In the appearance evaluation, the final pattern designed in this research received higher scores than the original design(straight; p<.001, bent; p<.05). The results of the evaluation of the comfort when moving also showed higher scores for the final pattern that was designed.

• Fashion & Textile Research Journal
• /
• v.20 no.4
• /
• pp.429-438
• /
• 2018

This study analyzed the fit-zone of the neck for females in their 60s. We considered the standard body types of females in their 60s and the four body types from the sixth Size Korea. The results of the study were as follows. We could not determine a pattern formula for the neck based on the changes in the body type of females in their 60s. However, the position of the lateral neck point generally showed a significant difference from that of females in their 20s. In the case of the shoulder angle, the point of the shoulder was angled slightly towards the back in all body types. It was also found that the curve of the neck circumference for both the collar and the bodice should have been smoother than what was shown on the 3D shape. The larger the height difference between the point of the back of the neck and the lateral neck point in the 3D shape, the smoother the design should be at the curve of the circumference at the front of the neck. A larger curvature in the front radius of the 3D shape increased the difference in the shape of the curve between the collar and the basic pattern of the bodice. Hence, a more careful design is required for these parts of the pattern. In addition, the more the front neck is bent, the smoother the circumference curve should be in the pattern design at the front of the neck and the collar.

• Journal of the Korean Society of Costume
• /
• v.63 no.1
• /
• pp.97-107
• /
• 2013

To give satisfaction with the fit to a wearer, the wearer's body size and body types should be considered first, this study conducted the descriptive statistical analysis on the upper body measurements of women in their 20s because their body shape has reached the completion stage of adult female's physical development. Also, the analysis classified their upper body types into groups to secure basic data for (maximum satisfaction with the fit of ready-to-wear clothing. The factor analysis was conducted using 49 items of measurement. The main factor analysis was used as a factor extraction method. After extracting the factors with Eigenevalues over 1, the factor loadings were drawn using the Varimax rotation. As a result, 6 factors were extracted. To secure internal consistency, factors that could lower the reliability of the experiment were taken out, so only 36 of the 49 items were used for the analysis. After selecting the items to recognize the main features of each body type, they were used for the final factor analysis. The entire R square of the 6 factors was 84.06%. To classify the upper body types of women in their 20s and to recognize the main features of each body shape type, the researcher conducted the cluster analysis with the items generated from the factor analysis. Through the cluster analysis, the upper body type of women in their 20s were classified into 3 body types. Also, since there are some restrictions on this research objects in terms of local and numbers of measured objects, the results of the this research should only be used as basic data.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.4 no.2
• /
• pp.180-188
• /
• 1994

This study was designed to investigate qualitatively whether respirators now being used in workplaces tit workers iflfaces well or not. Leak sites were determined after exposing the subjects to fluorescent aerosol and were analyzed by gender, brand and manufacturing nation. The results were as follows ; 1. Among those leak sites which were classified into four areas(nose, cheek, lip and chin), test aerosol was mostly deposited on the nose and the cheek areas. 2. The mean number of leak sites observed from the female subjects were 2.3 while the number were 2.2 from the male subjects. The most frequently observed leak site was nose and followed by chin, lip and cheek in descending order of frequency. 3. Among different brands of respirators, different leak sites were observed. Test subjects wearing the Sand N brands were more heavily exposed than those of wearing the D and M brands. 4. No significant difference of the number of leak sites were found between Korean-made and American-made masks. However, the most frequent leak site observed for the Korean-made ones was the nose area while it was the chin area for the American-made ones. 5. Analyses of 97 leak sites by shape showed that 27(27.8%) were point types, 54(55.7%) diffuse types and 16(16.5%) streamline types. 6. Test subjects indicated that the facepieces of Korean-made respirators were harder and smaller in size than those of American-made one. The most comfortable respirator selected was the respirator by the N Co. and the most uncomfortable one was the respirator by the D Co. This study suggests that many half-mask respirators now being used in the workplaces may not fit to workers well. Therefore, when selecting respirators, employers are advised to test respirators if they fit to workers well. And manufacturers are recommended to produce effective and comfortable respirators tested qualitatively and quantitatively not only in the laboratory but also in the field.

• Fashion & Textile Research Journal
• /
• v.16 no.3
• /
• pp.406-420
• /
• 2014

The goal of this study is to support the children's pants construction methods that secure clothing size and fit appropriateness through proposed improvements of denim pants construction method focusing on 4-year-old boys. Depths interview on the actual condition, measurements and calculations for positions and ease of the clothing points corresponding to the body points actually worn were conducted for 47 denim pants of nine boys. "Characteristics of the areas worn" and "physical characteristics of lower body" were analyzed, and improvements of 4-year-old children's denim pants construction method were proposed. As the results, the different figures in "characteristics of the areas worn" between the existing children's pants construction methods and children's actual wearing habits were found, and identification of distinct children's lower body from adults' supports that we should avoid tracing adults' methods without reasons. Children's pants construction method on basis of actual wearing should be devised to solve fit problems. Improvements of children's method were proposed such as ease of girth by different area worn, ease of "elastic waist girth", the difference between "elastic waist girth" and "pattern waist girth", and the difference between "pattern waist girth" and "pattern hip girth" as considerations of pants girth items, and appropriate position "clothing waist girth" "pants hip length" level, "pants crotch length" level, "clothing knee length" level, and "pants outside length" level for pattern making as considerations of clothing length items.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.39 no.2
• /
• pp.271-286
• /
• 2015

This study presented functional designs for development of functional compression wear for men in their forties based on body muscles as well as designed 2D patterns using 3D standard body form data of men in their forties. Patterns with an optimal stretch rate were proposed through a comfort evaluation. Different material was used for different areas such as the sports ability strengthening areas including body parts that often move for sports (such as the shoulders, abdomen and lower arm), areas that require ventilation for perspiration (such as the chest and back center, and armpits), and stable form areas (such as the chest, waist and elbows). The front and back surface areas of the developed pattern was an average 102.4% size compared to the body surface area. The results indicated that the 90% reduction pattern showed changes in pressure value according to area of movement, had the best breathability when worn, and had the best, most comfortable fit compared to the other subjects. The clothing pressure values of the pattern were around 22.1-23.4mmHg for the arm area (which has a big movement range and has many muscles) and 10.4-11.8mmHg for chest and abdomen areas related to major organs and breathing, indicating appropriate clothing pressure. A compression wear top pattern with pressure appropriate to the target age range and excellent appropriateness for the body form will be developed for men in their forties. A study method will be proposed to develop design technology for ergonomic compression wear tops with excellent fit and comfort.