• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.2
• /
• pp.136-145
• /
• 2011

This study identifies methods to design patterns for jeans that are suitable for women in their twenties. Five patterns suggested by previous researchers were used to draw the same size of jeans (waist 67 and hip 91). The author compared and analyzed the measurements and shapes of the patterns, ranging from waist to crotch. Samples were produced based on these patterns and then tests were conducted to observe the dynamic functions and exteriors of the samples. The dynamic functions observed in this study include walking, ascending stairs, descending stairs and sitting on chairs. The results of the current study are as follow. The best evaluated pattern in terms of exteriors is the one where the hips and thighs are tightest compared to other patterns and where the back part is wider than the front part. This pattern also received high evaluations in dynamic functions due to comfort when walking. Regarding ascending or descending stairs, the tests found that all its parts (except the front crotch) are more comfortable than those of any other patterns. All these results show that a comfortable fit and easy movement is possible when the crotch width of the back is broader than the hip width so that the hips are comfortably supported.

• International Journal of Reliability and Applications
• /
• v.4 no.1
• /
• pp.1-12
• /
• 2003

Many software reliability growth models (SRGM's) based on a nonhomogeneous Poisson process (NHPP) have been proposed by many researchers. Most of the SRGM's which have been proposed up to the present treat the event of software fault-detection in the testing and operational phases as a counting process. However, if the size of the software system is large, the number of software faults detected during the testing phase becomes large, and the change of the number of faults which are detected and removed through debugging activities becomes sufficiently small compared with the initial fault content at the beginning of the testing phase. Therefore, in such a situation, we can model the software fault-detection process as a stochastic process with a continuous state space. In this paper, we propose a new software reliability growth model describing the fault-detection process by applying a mathematical technique of stochastic differential equations of an Ito type. We also compare our model with the existing SRGM's in terms of goodness-of-fit for actual data sets.

• Fashion & Textile Research Journal
• /
• v.22 no.6
• /
• pp.826-833
• /
• 2020

When it is necessary to wear masks for long periods, such as during the current COVID-19 pandemic, the essential function of masks to prevent contamination (or transmission to others) as well as comfortableness are important. For this study, we used three-dimensional (3D) facial measurements of adult women to compile basic face shape data for designing comfortable and effective masks. This study analyzed the 3D facial data of 127 subjects in their 20s to 30s of the 6th Size Korea. Factor analysis of the survey data produced seven factors that formed the composition of adult female faces. These factors combined to produce three facial types: square (long face and a large lower middle face), oval (smallest central and lower body in the middle), and triangle (short face with a small central and lower large nose). These types reflect that the facial types of adult women show the differences in the nose angle, nose length, bitragion-subnasal arc, bitragion-menton arc. Therefore, properly fitting masks for fine dust particle filtration require 3D customization of a mask's breathing apparatus to fit differently shaped central and lower face parts that interfere with mask fit.

• Smart Structures and Systems
• /
• v.33 no.1
• /
• pp.65-91
• /
• 2024

The use of five optimization techniques for the prediction of a strength-based concrete mixture's best-fit model is examined in this work. Five optimization techniques are utilized for this purpose: Slime Mold Algorithm (SMA), Black Hole Algorithm (BHA), Multi-Verse Optimizer (MVO), Vortex Search (VS), and Whale Optimization Algorithm (WOA). MATLAB employs a hybrid learning strategy to train an artificial neural network that combines least square estimation with backpropagation. Thus, 72 samples are utilized as training datasets and 31 as testing datasets, totaling 103. The multi-layer perceptron (MLP) is used to analyze all data, and results are verified by comparison. For training datasets in the best-fit models of SMA-MLP, BHA-MLP, MVO-MLP, VS-MLP, and WOA-MLP, the statistical indices of coefficient of determination (R²) in training phase are 0.9603, 0.9679, 0.9827, 0.9841 and 0.9770, and in testing phase are 0.9567, 0.9552, 0.9594, 0.9888 and 0.9695 respectively. In addition, the best-fit structures for training for SMA, BHA, MVO, VS, and WOA (all combined with multilayer perceptron, MLP) are achieved when the term population size was modified to 450, 500, 250, 150, and 500, respectively. Among all the suggested options, VS could offer a stronger prediction network for training MLP.

• The International Journal of Costume Culture
• /
• v.8 no.1
• /
• pp.43-50
• /
• 2005

This research analyzed the anthropometric data for Filipino plus-size women. The study aims to identify key dimensions used for the sizing system that can improve on fit and style concerns/issues for the plus-sizes. This study also develop a reference of body measurements for Filipino plus-size women from the data collected. The data was collected from subjects residing or working in the University of the Philippines and within Metro Manila. The full figure body shapes have been derived from the raw anthropometric data. The pear and the barrel shapes were derived figure types based on the anthropometric data collected. These body types show that weight distribution is on the lower torso for the pear and the upper torso for the barrel.

• Journal of ILASS-Korea
• /
• v.20 no.3
• /
• pp.175-180
• /
• 2015

A series of sprinkler discharging tests was conducted to measure the droplet size and its distribution of residential fire sprinkler heads. Droplet sizes in sprinkler spray were measured using a laser diffraction method for the flush, circular and pendent type sprinkler head. In this study, the $D_{v,50}$ of the flush type sprinkler heads were ranged between $530{\sim}1040{\mu}m$ and those of circular and pendent type were $988{\mu}m$ and $916{\mu}m$, respectively. The measured cumulative volume distributions were followed by a combination of the log-normal and Rosin-Rammler distribution which is widely used in the computational fire analysis and the parameters of distribution function were obtained from the best fit line through the measured data.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.38 no.1
• /
• pp.97-109
• /
• 2014

This study developed a functional dress shirt for adult males that reflected the body surface variation of a human body section by motion. This study conducted a 3D body scan for 8 subjects in their 40's based on the Size Korea 2010 database. Data recorded the proper posture change value and body surface change value to develop functional dress shirts for adult males. We scanned the subjects with a 3D body scanner for five primarily male wearing dress shirts and operating postures, right standing, arms raised to $90^{\circ}$ horizontal forward position, arms raised $90^{\circ}$ to the horizontal position side, lift up the arm $180^{\circ}$, and arm forward $90^{\circ}$ in a bent posture. We analyzed the 3D scan data from those motions to examine change of length using 3D software Rapidform XOS. The results indicated that the body surface sections with contraction were the front and rear shoulder area, armpit and central length as well the width of arms at more than 10%. The increased body section included the body and armpit back length; in addition, the rear arm vibration girth and under arm girth were more than 10%. In order to reflect the size variation of for each motion, the ease amount of the front and rear shoulder length and width needs to be reduced 20% because it affects the shoulder length during the right standing. The results suggest that the ease amount of the shoulder length should be minimal. The ease amount of the back size needs to be 0.5-2cm bigger and set 0.5-1.5cm longer than the dress shirt length side drooping to compensate for the side length shortage of each motion. The sleeve length needs to be 0-0.5cm shorter, and ease amount of the girth of sleeve bottom needs to be reduced 0-0.7cm due to the size variation of arms. However, the girth of the rear arms is suggested to be 0-0.6cm longer in the ease amount to the rear arm girth as the extension is more than 10% over the width and length of each motion.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.20 no.1
• /
• pp.43-53
• /
• 1996

This study was initiated to investigate (1) the current sizing system for mail-order clothing, (2) consumers' preference for sizing systems, and (3) consumers' satisfaction with garment size. The apparel items and the sizes available at various mail-order companies in Korea were also reviewed. This investigation of consumers' preferences for various size description systems includes a survey of 410 men and women who had purchased garments by mail-order. The data were analyzed by Statistical Analysis System/pc. The major results are as follows; 1. The sizing system of mail-order clothing was different by garment items. The number of apparel sizes available for mail-order purchasing was three or less. The most mail∼order garments were labeled by the numerical size codes of body girth nleasurements or letter code (S, M, L). 2. The size description system most prefered by female subjects(N : 360) was the numerical size code of a body measurement(55.4%). The combination of bust-hips-height measurements size codes were prefered by 13.3% . The pictogram was least premiered by the subjects. 3. The apparel items that subjects wanted to buy using mail-order were underwear, home -weat and night-wear. The heavy users of mail-order purchasing, however, also wanted to purchase expensive garments requiring precise fit. The subjects aged from 20's to 80's wanted to purchase childern's wear by mail. 4. The desire for diversity of garment item and size of mail-order apparel was relatively high. The subjets also wanted to purchase special size garments by mail-order, e. g., garment sizes for full or tall figure.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.37 no.5
• /
• pp.655-666
• /
• 2013

Disposable protective coveralls that cover the entire face and body are essential for operations in contaminative or dangerous environments. This research studied disposable protective coveralls on Korean market in order to improve the products that agricultural workers wear. We investigated the size specifications of 22 disposable protective coverall products sold in Korean markets and analyzed how well the size specifications cover Koreans' sizes by comparing and analyzing the size specifications with Korean body measurements and Korean standards for protective clothing. We analyzed the consistency, regularity, and fitness to body measurements of Koreans for each size by measuring the sizes of 15 different parts for 22 products each. Current disposable protective coverall products for the Korean market are unsuitable for Korean body measurements, especially women's. It was expected that wearers would be unable to choose products that fit their bodies well just by the offered size specifications due to a lack of regularity between the measurements for each size. In this result, it was assumed that the development of KS standards and the coverall pattern that reflect the body measurements of Koreans are needed.

• Journal of Fashion Business
• /
• v.22 no.5
• /
• pp.32-40
• /
• 2018

Big breasted women often experience dissatisfaction with ready-made brassieres, that do not account for individual breast types nor provide adequate cup sizes. This study was conducted to provide basic information on common breast shape and measurements of Korean big-breasted women, and to facilitate development of big-breasted women's bras with excellent fit and comfort. The study analyzed direct upper body measurements of 178 women in their 20's whith cup size C or bigger in the 5th, 6th and 7th Size Korea. In addition, 3D body scan data of women with bra size 75 and cup size C were re-collected and their breast types were examined. Average under-bust circumference of big-breasted women was 75 size in brassiere size. The average stature was 159.78 cm and the body weight was 60.33kg, indicating "overweight". Also, it was revealed that common breast types of big-breasted women, were hemispheric and cone types. The study can facilitate better understanding of breast shapes and sizes of standard big-breasted women, and will be useful as reference in selection of subjects in future studies.