• Journal of Korea Water Resources Association
• /
• v.53 no.10
• /
• pp.917-928
• /
• 2020

The purpose of this study is to find the appropriate probability distribution representing the size distribution of suspended cohesive sediment. Based on goodness-of-fit test for a significance level of 5% using the Kolmogorov-Smirnov test, it is found that the floc size distributions measured in laboratory experiment and field study show different results. In the case of sample data collected from field experiments, the Gamma distribution is the best fitting form. In the case of laboratory experiment results, the sample data shows the positively-skewed distribution and the GEV distribution is the best fitted. The lognormal distribution, which is generally assumed to be a floc size distribution, is not suitable for both field and laboratory results. By using 3-parameter lognormal distribution, it is shown that similar size distribution with floc size distribution can be simulated.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.11 no.2
• /
• pp.92-101
• /
• 2001

This article reviewed previous studies on the 3D face recognition and anthropometric facial analysis to design suitable respirators for individuals. 3D facial anthropometric data have not been reported in Korea yet. With 3D facial data, it is possible to design and to manufacture respirators having more effective respirator-face seal and thus providing more comfortable wearing than donning of those respirators designed using 1 and 2-dimensional data. Also 3D data could be used for respirator fit-testing and selecting suitable respirator type and size by computer simulation without several steps of fit-test to each individual worker.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.2
• /
• pp.139-147
• /
• 2005

The lubricant impregnated MC nylon has good frictional properties, but its mechanical strength is inferior to steel for the mechanical elements. For the tribological application Nylon as gears, sliding bearings, cam and etc, the steel shafts are fitted in pre-heated nylon cylinder by a process of interference expansion fit and bonded by induction heating method. The joint shear strength of the two materials was measured by a universal test machine. From the study, the adhesive shear strength between these two materials was affected by the factors of the interference between nylon and steel, the size of nylon cylinder, knurl of steel shaft and inducting heating conditions. The most effective jointing conditions were analyzed and decided for the practical application in the industry.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.12 s.138
• /
• pp.1605-1616
• /
• 2004

The purpose of this study was to investigate the commonly accepted ease for a custom-fit business jacket, which provides all customers with the optimum fit regarding their individual body sizes, shapes as well as their personal preference, and also to characterize the factors which affects the ease amount, thereby, supply the reference data to manufacturers of the apparel industry. This study consisted of anthropometric measurements as well as sensory evaluations, and analysed ease amount by body sizes, ages, fit satisfaction, self-perception of body, and the prefered fit levels. There were 272 subjects for anthropometric measurement of which 128 subjects were applied for ease analysis and sensory evaluation. The subjects were males of 20 to 65 years old. The ease at chest was the most sensitive to body sizes and shapes, while waist and hip were easily modified to accommodate the silhouette of the jacket. The main dimensions affecting individual perceptions of fit and ease were the characteristics of body shape, in particular, girth, followed by age. Customers paided most attention to the shoulder fit while customers who preferred a more fitted line showed more concern with ease for jacket fit. It was clearly observable in case of waist fit preference. In addition, the preferred fit at chest, waist and hip would be changed by the perception of ons's hip size.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.3
• /
• pp.480-491
• /
• 2010

This study investigates the body satisfaction and fitness apparel depending on age and silhouette. The subjects were 254 females 20~50 years of age living in Chungju South Korea. There are various body types in women over the age of 35, the lower part of the body-development type, regular type, the upper part of the body-development type, and the rectangular body type. In addition, there is a lower satisfaction level in circumferences related with apparel fit, especially in the sleeve length, armhole, and crotch length. Therefore, a size system is needed that considers various body types in ready-to-wear clothing for middle-aged women. Design, color, and pattern are most important in clothing purchases by unmarried women, but the ease of laundry management and price discounts are the most significant for clothing purchases by married women. The upper part of the body-development type is unsatisfactory in the size-fit of sleeve length and shoulder width, but the lower part of the body-development type is unsatisfactory in the circumference of the waist, hip, abdominal, girth of skirt, and crotch length. The rectangular body type and the lower part of the body-development type are unsatisfactory in movement comfort, especially in hip girth and crotch length. The upper part of the body-development type is unsatisfactory in the movement comfort of the chest and elbow girth.

• Journal of the Korean Society of Costume
• /
• v.60 no.8
• /
• pp.67-85
• /
• 2010

School uniform has improved greatly in terms of fit, size, function, and design due to steep competition in the market and the strong interest of researcher, while little effort has been made for physical training uniform, so the objective of this study is to provide basic research data of the training uniform for the improvement of its design and fitness. For this purpose, 327 high school girls provided information on size and design of their uniform, level of satisfaction, the recognized ease in uniform. Most students wore the physical training uniform in another classes and the long sleeved shirt were the most popular one. They often used the uniform for the protection from cold and for comfortable activeness. For a long sleeved shirt, most students preferred raglan sleeve, zip-up collar, straight waist line, and ribbed sleeve cuffs and hem. For long pants, students preferred elastic waist band and ribbed pants cuffs. Currently, the short-sleeved shirt mostly had a shirts collar, ribbed hem, straight waist line with raglan sleeve, but students wanted a round neck and set-in sleeve. For overall level of satisfaction, students showed high satisfaction in terms of function and psychological effect, while aesthetic quality of the uniform was needed to be much improved. Most students evaluated that the circumference of uniforms properly fit or had a little ease, and students considered waist size the most suitable. The long pants length evaluated properly fit or a little long. Students accepted that the ease of summer uniform was more suitable than winter uniform's both at circumference and at length. Depending on students' height distribution, the length of long pants and short pants varied significantly.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.52 no.4
• /
• pp.281-289
• /
• 2016

Spinyhead sculpin Dasycottus setiger, a species of cold water fish, is distributed along the eastern coastal waters of Korea. A series of fishing experiments was carried out in the waters near Uljin from June, 2002 to November, 2004, using the experimental monofilament gill nets of different mesh sizes (82.2, 89.4, 104.8, and 120.2 mm) to describe the selectivity of the gill net for the fish. The SELECT (Share Each Length's Catch Total) analysis with maximum likelihood method was applied to fit the different functional models (normal, lognormal, and bi-normal models) for selection curves to the catch data. The bi-normal model with the fixed relative fishing intensity was selected as the best-fit selection curve by AIC (Akaike's Information Criterion) comparison. For the best-fit selection curve, the optimum relative length (the ratio of fish total length to mesh size) with the maximum efficiency and the selection range ($R_{50%,large}-R_{50%,small}$) of 50% retention were obtained as 2.363 and 0.851, respectively. The ratios of body girth to mesh perimeter at 100% retention where the selection curve of each mesh size represented the optimum total length were calculated as the range of 0.86 ~ 0.87.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.12
• /
• pp.1454-1465
• /
• 2011

Menswear body types are often labeled on garments (to indicate how the garments are designed to fit) with indicators of a size category such as regular, portly, and stout, athletic, or big and tall. A drop (relationships between the chest and waist girths) is related to the fit of a tailored suit. However, current standards are not designed for various drops or body types. There is not enough information of categorizing men's body shapes for the apparel sizing systems. In this article, a set of men's data from SizeUSA sizing survey was analyzed to investigate men's body shapes and drops. Factor analysis and a cluster analysis method were used to categorize men's body shapes. In the results, twenty-five variables were selected through the factor analysis and found four factors: girth factor, height factor, torso girth factor, and slope degree factor. According to the factor and cluster analysis, various body shapes were found: Slim Shape (SS - tall ectomorphy), Heavy Shape (HS - athletic, big & tall, endomorphy and mesomorphy), Slant Inverted Triangle Shape (SITS - regular, slight ectomorphy and slight mesomorphy weight range from normal to slightly overweight), Short Round Top Shape (SRTS - portly and stout, endomorphy). Body shapes were related to fitting categories. SS and HS were related to big & tall fitting category. SITS was related to regular. SRTS was related to portly and stout. Shape 1 (31%) and Shape 2 (26%) were related to current big & tall category. Shape 3 (34%) were related to regular. Shape 4 (9%) were in portly and stout category. ASTM D 6240 standard was the only available standard that presented a regular fitting category. Various drops were found within a same chest size group; however, this study revealed great variances of drops by body shape.

• Journal of the Ergonomics Society of Korea
• /
• v.15 no.1
• /
• pp.105-117
• /
• 1996

This study was initiated to investigate (1) whether consumers preferred a specific garment size labeling system and (2) whether consumer's demographic characteristics, clothing behavior, and body size affect their preference of size labeling systems. The survey of consumer's preferences for five size labeling systems included 443 women with 20 to 64 years of age. The result of the survey showed that the subjects' preferences of five size labeling sysems were different significantly. Subjects strongly preferred the old system rather than the revised systems. The subjects least preferred the system with pictogram(system D) and the system with description of the measuring methods of te control dimensions (system E). The subjects/ preference for various garment size labeling systems was different depending on their resident area, educational level, and body size. The garment size labeling system with more information on body measurements (system C) was preferred by the subjects living in the metro city area or subjects having difficulties on purchasing ready-to-wear garments giving reasonable fit. The simplest size labeling system (system A) was strongly preferred by the subjects of low educational level, or the subjects living in the small city.

• Journal of The Korean Association For Science Education
• /
• v.16 no.2
• /
• pp.134-145
• /
• 1996

The purpose of this study was to investigate effects of mental capacity and mental demand on problem solving. Two kinds of tests were used for this study. One was FIT 752 test which required general knowledge, the other was Ohm's law test which required domain specific knowledge. The items of each test had the same logical structure and content knowledge but had different sizes of mental demand. The results of the study were summarized as follows: As mental demand of the items increased, the success rates decreased. The analysis of the hierarchical relation among items was that items with large mental demand were higher than those with small demand or at least the same level. According to the results, mental of an item was a significant factor affecting solving the problem. Effect of mental capacity on problem solving was different according to the kind of required knowledge to solve. Mental capacity was a significant factor affecting solving the FIT 752 task which required general knowledge. On the contary, solving the task which required domain specific knowledge, the results were different depending on subjects' chunk size. The results of problem solving of the groups which had small chunk size were that mental capacity was appeared a significant factor. However, results of problem solving of groups which had large chunk size were that mental capacity was not.