• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.4
• /
• pp.255-267
• /
• 2020

Under SLD conditions, due to the large size of droplets, physical phenomena such as wall-droplet interaction and deformation have a significant effect on the icing process. Accordingly, many studies have been conducted in order to computationally simulate SLD effects. As one of the efforts, post-processing method have been proposed to describe wall-droplet interaction effect, which modified collection efficiency using Wright model. However, since the model doesn't properly consider the wall condition, it still overestimated collection efficiency and impingement limit. To solve this problem, impingement areas were divided into 3 different regions, and the post-processing method was introduced with the new wall-droplet interaction model developed based on Bai and Gosman rebound model. In order to consider the effect of deformation, the most suitable model was selected by comparing the deformation models used in the various icing codes. As a result, the modified post-processing method showed improved accuracy in predicting the impingement limits and collection efficiency by further estimating mass flux loss due to rebound, and it was observed that the result was the closest to the experimental data when the deformation effect was included by using Wiegand model.

• Journal of Korea Water Resources Association
• /
• v.33 no.4
• /
• pp.461-469
• /
• 2000

An numerical analysis of sediment-laden flow is carried out, and results are compared with the experiments of Coleman(1981, 1986) that included the several cases varying sediment size and quantity in open channel flow. K-$\omega$ turbulence model is selected for the fully turbulent flow field, and the concentration equation considering the fall velocity is adopted for the concentration field. The model of Einstein and Chien(1955) is applied to couple the velocity field and the concentration field. Most of researches have been carried out without considering the bed-load thickness, but it is found that the bed-load thickness cannot be ignored in case of a large amount of sediment or a large size of it. The bed-load thickness and surface roughness are considered in this study. Here, $\beta$ value, which is defined by the reciprocal of turbulent Schmidt number and is related with the concentration profile, is found to be varied according to the sediment size and quantity. Even though most of researchers have insisted that $\beta$ had always larger than 1.0, it may be concluded that $\beta$ can have smaller value than 1.0, that is coincident with the report of recent research.

• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.1
• /
• pp.25-33
• /
• 2016

In order to visualize point based Location-Based Social Network Services(LBSNS) data on multi-scaled tile map effectively, it is necessary to apply tile-based clustering method. Then determinating reasonable numbers and size of tiles is required. However, there is no such criteria and the numbers and size of tiles are modified based on data type and the purpose of analysis. In other words, researchers' subjectivity is always involved in this type of study. This is when Modifiable Areal Unit Problem(MAUP) occurs, that affects the results of analysis. Among LBSNS, geotagged Twitter data were chosen to find the influence of MAUP in scale effects perspective. For this purpose, the degree of spatial autocorrelation using spatial error model was altered, and change of distributions was analyzed using Morna's I. As a result, positive spatial autocorrelation showed in the original data and the spatial autocorrelation was decreased as the value of spatial autoregressive coefficient was increasing. Therefore, the intensity of the spatial autocorrelation of Twitter data was adjusted to five levels, and for each level, nine different size of grid was created. For each level and different grid sizes, Moran's I was calculated. It was found that the spatial autocorrelation was increased when the aggregation level was being increased and decreased in a certainpoint. Another tendency was found that the scale effect of MAUP was decreased when the spatial autocorrelation was high.

• Journal of the Korean Institute of Gas
• /
• v.4 no.4 s.12
• /
• pp.42-49
• /
• 2000

Due to their size and complexity, it is very difficult to make diagnostic system for the whole chemical processes. Therefore, a systematic approach is required to decompose larpge-scale process into sub-processes and then diagnose them. This paper suggests a method for the minimization of knowledge base and flexible diagnosis to be used in qualitative fault diagnosis based on Fault-Effect Tree model. The system can be decomposed for flexible diagnosis, size reduction of knowledge base, and consistent construction of complex knowledge base. The new node, gate-variable, is introduced to connect the cause-effect relationships of each sub-process. For on-line diagnosis, off-line analysis is performed to construct Fault-Effect Trees of gate-variables as well as activation conditions of gate-variables. On-line diagnosis strategy is modified to get the same diagnosis result without system decomposition. The proposed method is illustrated with a fault diagnosis system for a large-scale boiler plant.

• Journal of muscle and joint health
• /
• v.21 no.3
• /
• pp.173-183
• /
• 2014

Purpose: This study examined the effects of exercise programs on the pain and quality of life in patients with knee osteoarthritis. Methods: Electronic bibliographic databases of KiSTi, KoreaMed, KISS and KERIS were searched to identify studies of randomized controlled trials and non-randomized controlled trials. As a result, 1213 publications identified and 16 studies met inclusion and exclusion criteria. All studies examined for quality assessment of studies using Cochrane's risk of bias. Results: The 16 studies were eligible for inclusion criteria, then the meta-analysis was conducted to examine effectiveness of exercise programs on pain and quality of life in patients with knee osteoarthritis. The meta- analysis based on the random effect model showed that the exercise program was beneficial in decreasing pain (effect size .69; 95% confidence interval 0.45~0.91). Also, the exercise programs have been shown to be effective in significantly improving the quality of life. However, it was not statistically significant due to severe deviations of studies (effect size 1.06; 95% confidence interval -0.34~2.46). Conclusion: Exercise programs had positive effects on pain relief and improvement of the quality of life in patients with knee osteoarthritis, although the quality of life was not statistically significant due to severe deviations of studies.

• Journal of The Korean Society of Integrative Medicine
• /
• v.8 no.4
• /
• pp.1-11
• /
• 2020

Purpose : The purpose of this meta-analysis was to examine the effects of microcurrent on inflammatory musculoskeletal diseases. Methods : Domestic databases (RISS, NDSL, KISS, DBpia, and Kmbase) were searched for studies that conducted clinical trials associated with microcurrent and its impact on inflammatory musculoskeletal diseases. A total of 606 studies published between 2002 and 2019 were identified, with 8 studies satisfying the inclusion data. The studies were classified according to patient, intervention, comparison, and outcome (PICO). The search outcomes were items associated with blood component, pain, and function. The 8 studies that were included in the study were evaluated using R meta-analysis (version 4.0). The quality of 7 randomized control trials was evaluated using Cochrane risk of bias (ROB). The quality of 1 non-randomized control trial was evaluated using risk of bias assessment tool for non-randomized studies (RoBANS). Effect sizes were computed as the corrected standard mean difference (SMD). A random-effect model was used to analyze the effect size because of the high heterogeneity among the studies. Egger's regression test was carried out to analyze the publishing bias. Results : The following factors had a large effect size involving microcurrent on inflammatory musculoskeletal diseases: blood component (Hedges's g=-2.46, 95 % CI=-4.20~-0.73), pain (Hedges's g=3.51, 95 % CI=2.44~4.77), and function (Hedges's g=3.06, 95 % CI: 1.53~4.58). Except for function (t=1.572, p=.191), Egger's regression test showed that the publishing bias had statistically significant differences. Conclusion : This study provides evidence for the effectiveness of microcurrent on inflammatory musculoskeletal diseases in terms of blood component, pain, and function. However, due to the small sample sizes used in the included studies, the results of our study should be interpreted cautiously, especially considering the publishing bias.

• Journal of Korean Neurosurgical Society
• /
• v.29 no.2
• /
• pp.167-179
• /
• 2000

Objective : We studied to clarify the effective time zone of mild hypothermic neural protection during ischemia and/or reperfusion after middle cerebral artery occlusion. Methods : In a reversible cerebral infarct model which maintained reperfusion of blood flow after middle cerebral artery occlusion for two hours, the size of cerebral infarction, cerebral edema and the extent of neurological deficit were observed and analyzed for comparison between the control and the experimental groups under hypothermia($33.5^{\circ}C$). The temporalis muscle temperature was reduced to $33.5^{\circ}C$ by surface cooling for two hours during middle cerebral artery occlusion for study group I. The following groups applied hypothermia for two-hour periods after reperfusion : group II(0-2 hours), group III(2-4 hours), and group IV(4-6 hours). They were rewarmed to $36.5^{\circ}C$ until sacrified at 2, 4, 6, 12, and 24 hours after reperfusion. Control group was maintained at normothermia without hypothermia. Results : In the experimental groups with hypothermia, the average value of the size of cerebral infarction($mean{\pm}SD$) was $1.97{\pm}1.65%$, which was a remarkable reduction over that of the control, $4.93{\pm}3.79%$. In the control, a progressive increase was shown in the size of infarction from point of reperfusion to 6 hours after reperfusion without further changes in size afterward. Intra-ischemic hypothermia(group I) prevented ischemic injury but did not prevent reperfusion injury. Group II examplified the most neural protective effect in comparison to the control group and group IV(p<0.05). The cortex was more vulnerable to reperfusion injury than the subcortex. Mild hypothermia showed more neural protective effects on the cortex than subcortex. Conclusion : The most appropriate time zone for application of mild hypothermia was defined to be within four hours following reperfusion.

• Structural Engineering and Mechanics
• /
• v.32 no.3
• /
• pp.429-445
• /
• 2009

Thermal stability of quasi-isotropic composite and polymeric structures is considered one of the most important criteria in predicting life span of building structures. The outdoor applications of these structures have raised some legitimate concerns about their durability including moisture resistance and thermal stability. Exposure of such quasi-isotropic composite/polymeric structures to various and severe climatic conditions such as heat flux and frigid climate would change the material behavior and thermal viability and may lead to the degradation of material properties and building durability. This paper presents an analytical model for the generalized problem. This model accommodates the non-linearity and the non-homogeneity of the internal heat generated within the structure and the changes, modification to the material constants, and the structural size. The paper also investigates the effect of the incorporation of the temperature and/or material constant sensitive internal heat generation with four encountered climatic conditions on thermal stability of infinite cylindrical quasi-isotropic composite/polymeric structures. This can eventually result in the failure of such structures. Detailed critical analyses for four case studies which consider the population of the internal heat generation, cylindrical size, material constants, and four different climatic conditions are carried out. For each case of the proposed boundary conditions, the critical thermal stability parameter is determined. The results of this paper indicate that the thermal stability parameter is critically dependent on the cylinder size, material constants/selection, the convective heat transfer coefficient, subjected heat flux and other constants accrued from the structure environment.

• Parasites, Hosts and Diseases
• /
• v.48 no.2
• /
• pp.171-174
• /
• 2010

The anti-tumorigenic effects of Toxoplasma gondii (RH) antigens were studied in a murine sarcoma-180 tumor model. To determine the anti-tumor effects, the reduction in tumor size and expression of CD31 (an angiogenesis marker in the tumor tissue) were examined after injection of BALB/c mice with T. gondii lysate antigen (TLA) or formalin-fixed, proliferation-inhibited, T. gondii tachyzoites. Tumors were successfully produced by an intradermal injection of sarcoma-180 cells with plain Matrigel in the mid-backs of mice. After injection with TLA or formalin-fixed T. gondii tachyzoites, the increase in tumor size and weight nearly stopped while tumor growth continued in control mice that were injected with PBS. CD31 expression in TLA-treated or formalin-fixed T. gondii-injected mice was lower than the control mice. Accordingly, the present study shows that the treatment of mice with formalin-fixed T. gondii or TLA in the murine sarcoma-180 tumor model results in a decrease of both tumor size and CD31 expression.

• Structural Engineering and Mechanics
• /
• v.63 no.1
• /
• pp.1-9
• /
• 2017

Shot peening is a cold surface treatment employed to induce residual stress field in a metallic component beneficial for increasing its fatigue strength. The experimental investigation of parameters involved in shot peening process is very complex as well as costly. The most attractive alternative is the explicit dynamics finite element (FE) analysis capable of determining the shot peening process parameters subject to the selection of a proper material's constitutive model and numerical technique. In this study, Ansys / LS-Dyna software was used to simulate the impact of steel shots of various sizes on an aluminium alloy plate described with strain rate dependent elasto-plastic material model. The impacts were carried out at various incident velocities. The influence of shot velocity and size on the plastic deformation, compressive residual stress and force-time response were investigated. The results exhibited that increasing the shot velocity and size resulted in an increase in plastic deformation of the aluminium target. However, a little effect of the shot velocity and size was observed on the magnitude of target's subsurface compressive residual stress. The obtained results were close to the published ones, and the numerical models demonstrated the capability of the method to capture the pattern of residual stress and plastic deformation observed experimentally in aluminium alloys. The study can be quite helpful in determining and selecting the optimal shot peening parameters to achieve specific level of plastic deformation and compressive residual stress in the aluminium alloy parts especially compressor blades.