• Journal of Korean Society on Water Environment
• /
• v.35 no.1
• /
• pp.35-42
• /
• 2019

Urbanization has led to extreme changes in land use on urban watersheds. Most cities are becoming residential, commercial and industrial areas, making infiltration and storage of rainfall less favorable. The demand for LID (Low Impact Development) technology is increasing in order to mitigate this water cycle distortion and return to existing hydrological conditions. The LID technique is effective in reducing runoff by permeating the urban impervious area. However, considering the limit of the installation area and the financial requirement of the installation, there is not much research on the linkage of each LID component technology for optimum efficiency according to the appropriate scale. In this study, the effects of the LID facilities applied to the target site were simulated using the SWMM model, suggesting the optimal linkage method considering interconnectivity, and applying the effects as an existing installation of individual facilities. The water balance at the time of application of the LID technology, short-term and long-term rainfall event were compared. Also, the individual application and the linkage application were compared with each other. If each component technology has sufficient processing size, then linkage application is more effective than individual application.

• Nuclear Engineering and Technology
• /
• v.50 no.7
• /
• pp.1138-1147
• /
• 2018

Delayed hydride cracking (DHC) is an important failure mechanism for Zircaloy tubes in the demanding environment of nuclear reactors. The threshold stress intensity factor, $K_{IH}$, and critical hydride length, $l_C$, are important parameters to evaluate DHC. Theoretical models of them are developed for Zircaloy tubes undergoing non-homogenous temperature loading, with new stress distributions ahead of the crack tip and thermal stresses involved. A new stress distribution in the plastic zone ahead of the crack tip is proposed according to the fracture mechanics theory of second-order estimate of plastic zone size. The developed models with fewer fitting parameters are validated with the experimental results for $K_{IH}$ and $l_C$. The research results for radial cracking cases indicate that a better agreement for $K_{IH}$ can be achieved; the negative axial thermal stresses can lessen $K_{IH}$ and enlarge the critical hydride length, so its effect should be considered in the safety evaluation and constraint design for fuel rods; the critical hydride length $l_C$ changes slightly in a certain range of stress intensity factors, which interprets the phenomenon that the DHC velocity varies slowly in the steady crack growth stage. Besides, the sensitivity analysis of model parameters demonstrates that an increase in yield strength of zircaloy will result in a decrease in the critical hydride length $l_C$, and $K_{IH}$ will firstly decrease and then have a trend to increase with the yield strength of Zircaloy; higher fracture strength of hydrided zircaloy will lead to very high values of threshold stress intensity factor and critical hydride length at higher temperatures, which might be the main mechanism of crack arrest for some Zircaloy materials.

• Advances in nano research
• /
• v.10 no.5
• /
• pp.449-460
• /
• 2021

Flexoelectricity is an interesting materials' property that is more touchable in small scales. This property beside the sandwich structures placed in the center of scientists' attention due to their extraordinary effects on the mechanical properties. Furthermore, in the passage of decades, more elaborated sandwich structures took into consideration results from using honeycomb core. This kind of structure, inspiring from honeycomb core, provides more stiffness to weight ratio, which plays a crucial role in different industries. In this paper, based on the Love-Kirchhoff's hypothesis, Hamilton's principle, modified couple stress theory and Fourier series analytical method, equations of motion for a sandwich plate containing a honeycomb core integrated by two face-sheets have derived and solved analytically. The equations of both face sheets have derived by flexoelectricity consideration. Moreover, it should be noticed that the whole structure rests on the visco-Pasternak foundation. Conducting current research provided an acceptable and throughout study based on flexoelectricity to address the effect of materials' characteristics, length-scale parameter, aspect, and thickness ratios and boundary conditions on the natural frequency of honeycomb sandwich plates. Also, based on the presented figures and tables, there is a close agreement between previous studies and recent work. Due to the high ratio of strength to weight, current model analyzing is capable of taking into account for different vehicles' manufacturing in a high range of industries.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.8
• /
• pp.553-563
• /
• 2021

Customer value has long been believed to be a direct trigger for increased tourist satisfaction, but as a mediating variable, it still needs to be proven further. This paper aims to examine the causal relationship between research variables, as well as to examine the role of customer value as a mediating variable in the relationship between service quality, brand quality, tourism products, customer value, and tourist satisfaction with tourists' objects. The population is tourists who visit tourist sites/destinations in the Gianyar Regency on the island of Bali, Indonesia, and the sample size is 270 respondents, selected through random sampling. Structural equation modeling (SEM), a multivariate statistical analysis technique, is used to analyze the causal relationships between variables. The results show that the model is accepted, and customer value is proven to be a positive mediating variable. The results also show that service quality, brand quality, and tourism products have an effect on customer value. This provides insight into the practical implications for tourism managers to increase the brand quality of tourist attractions as well as increase the professionalism and quality of tour guide services. This, in turn, will increase customer value and increase tourist satisfaction.

• The Journal of the Korea Contents Association
• /
• v.21 no.2
• /
• pp.520-527
• /
• 2021

In this study, we focused on the low practicality of traditional outdoor advertisements due to uniformity of materials, shapes, and designs, so in order to improve it, we will analyze impact on the practicality of outdoor advertisements depends on the attached type of advertising signboards. The research method is to set up a research model and hypotheses through a literature review and conduct a survey and then perform factor analysis and hierarchical regression analysis. Hypothesis1. The evaluation factors (readability, formability or symbolism) of outdoor advertising signboard in traditional markets will affect their practicality. Hypothesis 2. The type of attached advertising signboards (protruding type or wall-type) in traditional markets will control the impact of each evaluation factors' on practicality. In a result, readability and formability will affect practicality. To increase practicality, the size, color, font, layout and etc. of outdoor advertising signboards should be well recognized to get the better understanding. Also, practicality will be increased by the harmonization and the sense of balance.

• Imaging Science in Dentistry
• /
• v.52 no.2
• /
• pp.171-179
• /
• 2022

Purpose: The aim of this study was to assess the accuracy of cone-beam computed tomographic (CBCT) images obtained using different voxel sizes in measuring trabecular bone microstructure in comparison to micro-CT. Materials and Methods: Twelve human skull bones containing posterior-mandibular alveolar bone regions were analyzed. CBCT images were obtained at voxel sizes of 0.075mm(high: HI) and 0.2mm(standard: Std), while microCT imaging used voxel sizes of 0.06 mm (HI) and 0.12 mm (Std). Analyses were performed using CTAn software with the standardized automatic global threshold method. Intraclass correlation coefficients were used to evaluate the consistency and agreement of paired measurements for bone volume (BV), percent bone volume (BV/TV), bone surface (BS), trabecular thickness (TbTh), trabecular separation (TbSp), trabecular number (TbN), trabecular pattern factor(TbPf), and structure model index (SMI). Results: When compared to micro-CT, CBCT images had higher BV, BV/TV, and TbTh values, while micro-CT images had lower BS, TbSp, TbN, TbPf, and SMI values (P<0.05). The BV, BV/BT, TbTh, and TbSp variables were higher with Std voxels, whereas the BS, TbPf, and SMI variables were higher with HI voxels for both imaging methods. For each imaging modality and voxel size evaluated, BV, BS, and TbTh were significantly different(P<0.05). TbN, TbPf, and SMI showed statistically significant differences between imaging methods(P<0.05). The consistency and absolute agreement between micro-CT and CBCT were excellent for all variables. Conclusion: This study demonstrated the potential of high-resolution CBCT imaging for quantitative bone morphometry assessment.

• Computers and Concrete
• /
• v.30 no.3
• /
• pp.175-183
• /
• 2022

To study the working mechanism and size effect of an innovative dovetail UHPC joint originated from the 5th Nanjing Yangtze River Bridge, a large-scale testing subject to negative bending moment was conducted and compared with the previous scaled specimens. The static responses, i.e., the crack pattern, failure mode, ductility and stiffness degradation were analyzed. It was found that the scaled specimens presented similar working stages and working mechanism with the large-scale ones. However, the post-cracking ductility and relative stiffness degradation all decrease with the enlarged length/scale, apart from the relative stiffness after flexural cracking. The slab stiffness at the flexural cracking stage is 90% of the initial stiffness while only 24% of the initial stiffness reserved in the ultimate stage. Finite element model (FEM) was established and compared with the experiments to verify its effectiveness in exploring the working mechanism of the innovative joint. Based on this effective method, a series of FEMs were established to further study the influence of material strength, pre-stressing level and ratio of reinforcement on its deflection-load relationship. It is found that the ratio of reinforcement can significantly improve its load-carrying capacity among the three major-influenced factors.

• Journal of Korea Trade
• /
• v.24 no.3
• /
• pp.1-19
• /
• 2020

Purpose - This study empirically analyzes the effects of provisional anti-dumping duties levied on imports by Korea following anti-dumping investigations. An anti-dumping duty is a legal tool that countries use to impose duties on imports to offset injurious dumping. This study verifies how effective the imposition of a provisional anti-dumping duty is and whether such duties have trade chilling effects on aggregate imports. Specifically, this study examines import trade diversion from named to unnamed countries caused by the imposition of provisional anti-dumping duties. Design/methodology - This empirical analysis employs an econometric model of provisional anti-dumping measures for cases in which Korea imposed final affirmative anti-dumping measures. We construct a monthly panel dataset for each stage of anti-dumping investigation undertaken by Korea for all manufacturing industries during 1995-2013. We illustrate a stage-by-stage analysis of anti-dumping investigations from initiation, preliminary decision, imposition of provisional duty, final affirmative decision, and imposition of final affirmative duty on a monthly basis at the six-digit harmonized system code-level. Findings - For cases in which provisional duties are imposed, the reduction in imports from named countries outweighs the increase in imports from unnamed countries. The substantial reduction in imports from named countries is large enough to offset the import diversion to unnamed countries, suggesting that import diversion in investigations is limited during the investigation period. Therefore, the use of provisional anti-dumping duties in Korea is effective, providing evidence of a chilling effect on aggregate imports. Originality/value - Few studies examine the size of the effects on import trade diversion of the imposition of provisional anti-dumping duties. We contribute to the literature by disentangling separate trade effects for each phase of the anti-dumping investigation process and imposition of provisional duty.

• Nutrition Research and Practice
• /
• v.15 no.3
• /
• pp.279-293
• /
• 2021

BACKGROUND/OBJECTIVES: The steamed ginger has been shown to have antioxidative effects and a protective effect against obesity. In the present study, we investigated the effects of ethanolic extract of steamed ginger (SGE) on adipogenesis in 3T3-L1 preadipocytes and diet-induced obesity (DIO) mouse model. MATERIALS/METHODS: The protective effects of SGE on adipogenesis were examined in 3T3-L1 adipocytes by measuring lipid accumulations and genes involved in adipogenesis. Male C57BL/6J mice were fed a normal diet (ND, 10% fat w/w), a high-fat diet (HFD, 60% fat w/w), and HFD supplemented with either 40 mg/kg or 80 mg/kg of SGE for 12 weeks. Serum chemistry was measured, and the expression of genes involved in lipid metabolism was determined in the adipose tissue. Histological analysis and micro-computed tomography were performed to identify lipid accumulations in epididymal fat pads. RESULTS: In 3T3-L1 cells, SGE significantly decreased lipid accumulation, with concomitant decreases in the expression of adipogenesis-related genes. SGE significantly attenuated the increase in body, liver, and epididymal adipose tissue weights by HFD. Serum total cholesterol and triglyceride levels were significantly lower in SGE fed groups compared to HFD. In adipose tissue, SGE significantly decreased adipocyte size than that of HFD and altered adipogenesis-related genes. CONCLUSIONS: In conclusion, steamed ginger exerted anti-obesity effects by regulating genes involved in adipogenesis and lipogenesis in 3T3-L1 cell and epididymal adipose tissue of DIO mice.

• Journal of Korea Trade
• /
• v.23 no.5
• /
• pp.45-65
• /
• 2019

Purpose - As the well-known Structure-Conduct-Performance paradigm implies, risk structure of a corporation may affect its risk management activity and the activity may in turn determine its performance. Depending on its goal, Foreign Direct Investment (FDI) can shape its risk structure, risk management and its performance. Under this assumption, we investigate the relationship between the goals of FDI and risk management for the first time in academics. Design/methodology - This empirical research uses a survey of 279 current Korean enterprises' FDIs in China with the recently developed business risk quadrant model. Companies are classified into either a market- or an efficiency-seeking group, to identify how each group perceives and manages risks, and values the performance of risk management. Also, we apply integrated risk management method that multinational corporations have introduced in China, then verify the mediating effect between risk factors and performance. Findings - Our research shows the FDIs can expose themselves to differing risk structure although risk management activities simply represent the level of empowerment given to local management by headquarter due to limit of sample size despite diversity of risk and risk management tools. To sum, market seekers are found to have more strategic risk (revenue related risk) than efficiency seekers with financial risk (cost related risk). The market seekers can manage their risk by empowering their local organisation while the efficiency does the opposite ways. The risk management appears to be successful in general. Originality/value - Previous studies on small and medium enterprises' FDIs to China have concentrated on the analysis of entry determinants, withdrawal factors and individual risk management. Meanwhile, this research establishes enterprise-wide risk factors faced by the companies that advance into China, according to the method of the classification by ERM and verifies if they could synthetically improve performance through risk corresponding measures.