• Journal of Biosystems Engineering
• /
• v.43 no.3
• /
• pp.237-246
• /
• 2018

Purpose: This study (a) investigated the effect of microwave power intensity and sample thickness on microwave drying characteristics of radish strips, and (b) determined the best-fit drying model for describing experimental drying data, effective moisture diffusivity ($D_{eff}$), and activation energy ($E_a$) for all drying conditions. Methods: A domestic microwave oven was modified for microwave drying and equipped with a small fan installed on the left upper side for removing water vapor during the drying process. Radishes were cut into two fixed-size strip shapes (6 and 9 mm in thickness). For drying experiments, the applied microwave power intensities ranged from 180 to 630 W at intervals of 90 W. Six drying models were evaluated to delineate the experimental drying curves of both radish strip samples. The effective moisture diffusivity ($D_{eff}$) was determined from Fick's diffusion method, and the Arrhenius equation was applied to calculate the activation energy ($E_a$). Results: The drying time was profoundly decreased as the microwave power intensity was increased regardless of the thickness of the radish strips; however, the drying rate of thicker strips was faster than that of the thinner strips up to a certain moisture content of the strip samples. The majority of the applied drying models were suitable to describe the drying characteristics of the radish strips for all drying conditions. Among the drying models, based on the model indices, the best model was the Page model. The range of estimated $D_{eff}$ for both strip samples was from $2.907{\times}10^{-9}$ to $1.215{\times}10^{-8}m^2/s$. $E_a$ for the 6- and 9-mm strips was 3.537 and 3.179 W/g, respectively. Conclusions: The microwave drying characteristics varied depending on the microwave power intensity and the thickness of the strips. In order to produce high-quality dried radish strips, the microwave power intensity should be lower than 180 W.

• Journal of Distribution Science
• /
• v.13 no.12
• /
• pp.33-40
• /
• 2015

Purpose - Given an increase in the consumption of plums, prices have fluctuated in an unstable manner, making it difficult for farmhouses to sell the product. This study intends to provide information on the cultivation and sale of plums to consumers, thus enabling producers to utilize relevant information to analyze the types of plums that are preferred and consumed by users. Research design, data, and methodology - In this study, a survey was conducted on plum consumption by a consumer panel established and operated by the Rural Development Administration in December 2009. The objective was to identify the purchasing awareness of plums and to analyze panel data from 2010 to 2013 using a linear regression model, a Tobit model, and a panel regression model to derive the purchase characteristics. Results - The outcome of the survey on plums is as follows. Plums are purchased because they are good for the health (90.6%), which means that most customers purchase plums for their health benefits. When plums are in season, the purchase rate is 94.8%, indicating that most plums are purchased when they are in season and that selling plums when they are out of season is difficult. Therefore, we sell most plums in the correct season, and the rest of the plums need to be processed and then sent to markets. The strongest reason for not purchasing plums is that they are difficult to process for consumption (63.1%), followed by the reason that the fruit is unfamiliar (15.5%). Regarding solutions for increasing the consumption of plums, the answers were as follows: distribute a recipe for plums (36.9%), advertise its effect through TV or the press (31.1%), and develop various processed products (15.6%). When customers decide to pick out plums, the major considerations were freshness (4.43), safe to eat (4.16), price (3.96), size (3.87), brand (3.28), and discount event (2.62). Freshness is important for decision making and safe to eat was more important than price because plums are washed and processed into plum jam. According to the results of the linear regression model, a higher family income results in a higher purchasing amount. However, the amount of plums purchased by a person was reduced if his or her income increased. Compared with individuals who used other purchasing agents on weekdays, those who used the traditional market turned out to purchase a higher amount of plums on the weekdays. Conclusions - Considering that numerous people purchase plums for their health benefits, promoting the consumption of plums is anticipated as being successful if they can be produced safely for consumption and for inclusion in recipes and various processed foods, and to promote eco-friendly agricultural practices.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.2
• /
• pp.77-85
• /
• 2001

This paper proposes a method of time-scale modification of polyphonic audio signals based on a sinusoidal model. The signals are modeled with sinusoidal component and noise component. A multiresolution filter bank is designed which splits the input signal into six octave-spaced subbands without aliasing and sinusoidal modeling is applied to each subband signal. To alleviate smearing of transients in time-scale modification a dynamic segmentation method is applied to subbands which determines the analysis-synthesis frame size adaptively to fit time-frequency characteristics of the subband signal. For extracting sinusoidal components and calculating their parameters matching pursuit algorithm is applied to each analysis frame of subband signal. In accordance with spectrum analysis a psychoacoustic model implementing the effect of frequency masking is incorporated with matching pursuit to provide a resonable stop condition of iteration and reduce the number of sinusoids. The noise component obtained by subtracting the synthesized signal with sinusoidal components from the original signal is modeled by line-segment model of short time spectrum envelope. For various polyphonic audio signals the result of simulation shows suggested sinusoidal modeling can synthesize original signal without loss of perceptual quality and do more robust and high quality time-scale modification for large scale factor because of representing transients without any perceptual loss.

• Journal of Convergence for Information Technology
• /
• v.11 no.6
• /
• pp.83-98
• /
• 2021

This study identified the influence of employees' hybrid start-up intention (intention to start a business while maintaining a job) on the employees' self-determination motivation (intrinsic motivation, extrinsic motivation) and prior knowledge through the Model of Goal-directed Behavior (MGB). We used a PLS-SEM called SmartPLS 3.0 for 126 valid samples collected by judgement extraction for office workers throughout June 13, 2020 to July 3, 2020, and empirically evaluated the measurement model (internal consistency reliability, convergent and discriminant validity) and the structural model (multicollinearity, determination coefficient, effect size, predictive relevance, etc.). Only the intrinsic motivation for realizing the hybrid start-up goal of office workers had a significant impact on the hybrid start-up attitude and subjective norms, and the prior knowledge of hybrid start-up had a significant impact on the hybrid start-up desire and the hybrid start-up intention. In order to induce hybrid start-ups for workers with unstable employment, we need systems and programs that can inspire employees with intrinsic motivation and knowledge about hybrid start-up, so follow-up researches are necessary to analyze about government systems and consulting support that can promote hybrid start-up.

• Asia pacific journal of information systems
• /
• v.20 no.3
• /
• pp.139-166
• /
• 2010

The supply chain management (SCM) systems have emerged as strong managerial tools for manufacturing firms in enhancing competitive strength. Despite of large investments in the SCM systems, many companies are not fully realizing the promised benefits from the systems. A review of literature on adoption, implementation and success factor of IOS (inter-organization systems), EDI (electronic data interchange) systems, shows that this issue has been examined from multiple theoretic perspectives. And many researchers have attempted to identify the factors which influence the success of system implementation. However, the existing studies have two drawbacks in revealing the determinants of systems implementation success. First, previous researches raise questions as to the appropriateness of research subjects selected. Most SCM systems are operating in the form of private industrial networks, where the participants of the systems consist of two distinct groups: focus companies and vendors. The focus companies are the primary actors in developing and operating the systems, while vendors are passive participants which are connected to the system in order to supply raw materials and parts to the focus companies. Under the circumstance, there are three ways in selecting the research subjects; focus companies only, vendors only, or two parties grouped together. It is hard to find researches that use the focus companies exclusively as the subjects probably due to the insufficient sample size for statistic analysis. Most researches have been conducted using the data collected from both groups. We argue that the SCM success factors cannot be correctly indentified in this case. The focus companies and the vendors are in different positions in many areas regarding the system implementation: firm size, managerial resources, bargaining power, organizational maturity, and etc. There are no obvious reasons to believe that the success factors of the two groups are identical. Grouping the two groups also raises questions on measuring the system success. The benefits from utilizing the systems may not be commonly distributed to the two groups. One group's benefits might be realized at the expenses of the other group considering the situation where vendors participating in SCM systems are under continuous pressures from the focus companies with respect to prices, quality, and delivery time. Therefore, by combining the system outcomes of both groups we cannot measure the system benefits obtained by each group correctly. Second, the measures of system success adopted in the previous researches have shortcoming in measuring the SCM success. User satisfaction, system utilization, and user attitudes toward the systems are most commonly used success measures in the existing studies. These measures have been developed as proxy variables in the studies of decision support systems (DSS) where the contribution of the systems to the organization performance is very difficult to measure. Unlike the DSS, the SCM systems have more specific goals, such as cost saving, inventory reduction, quality improvement, rapid time, and higher customer service. We maintain that more specific measures can be developed instead of proxy variables in order to measure the system benefits correctly. The purpose of this study is to find the determinants of SCM systems success in the perspective of vendor companies. In developing the research model, we have focused on selecting the success factors appropriate for the vendors through reviewing past researches and on developing more accurate success measures. The variables can be classified into following: technological, organizational, and environmental factors on the basis of TOE (Technology-Organization-Environment) framework. The model consists of three independent variables (competition intensity, top management support, and information system maturity), one mediating variable (collaboration), one moderating variable (government support), and a dependent variable (system success). The systems success measures have been developed to reflect the operational benefits of the SCM systems; improvement in planning and analysis capabilities, faster throughput, cost reduction, task integration, and improved product and customer service. The model has been validated using the survey data collected from 122 vendors participating in the SCM systems in Korea. To test for mediation, one should estimate the hierarchical regression analysis on the collaboration. And moderating effect analysis should estimate the moderated multiple regression, examines the effect of the government support. The result shows that information system maturity and top management support are the most important determinants of SCM system success. Supply chain technologies that standardize data formats and enhance information sharing may be adopted by supply chain leader organization because of the influence of focal company in the private industrial networks in order to streamline transactions and improve inter-organization communication. Specially, the need to develop and sustain an information system maturity will provide the focus and purpose to successfully overcome information system obstacles and resistance to innovation diffusion within the supply chain network organization. The support of top management will help focus efforts toward the realization of inter-organizational benefits and lend credibility to functional managers responsible for its implementation. The active involvement, vision, and direction of high level executives provide the impetus needed to sustain the implementation of SCM. The quality of collaboration relationships also is positively related to outcome variable. Collaboration variable is found to have a mediation effect between on influencing factors and implementation success. Higher levels of inter-organizational collaboration behaviors such as shared planning and flexibility in coordinating activities were found to be strongly linked to the vendors trust in the supply chain network. Government support moderates the effect of the IS maturity, competitive intensity, top management support on collaboration and implementation success of SCM. In general, the vendor companies face substantially greater risks in SCM implementation than the larger companies do because of severe constraints on financial and human resources and limited education on SCM systems. Besides resources, Vendors generally lack computer experience and do not have sufficient internal SCM expertise. For these reasons, government supports may establish requirements for firms doing business with the government or provide incentives to adopt, implementation SCM or practices. Government support provides significant improvements in implementation success of SCM when IS maturity, competitive intensity, top management support and collaboration are low. The environmental characteristic of competition intensity has no direct effect on vendor perspective of SCM system success. But, vendors facing above average competition intensity will have a greater need for changing technology. This suggests that companies trying to implement SCM systems should set up compatible supply chain networks and a high-quality collaboration relationship for implementation and performance.

• Journal of agricultural medicine and community health
• /
• v.28 no.1
• /
• pp.1-13
• /
• 2003

Objectives: The purpose of this study is to summarize results from 11 domestic studies about sick role behavior applied health belief model and to assess the effectiveness of components on behavior change by using meta-analysis. Methods: We collected the existing literatures by using major web search of 'pulmonary tuberculosis patients', 'health belief model', and 'sick role behavior' as key words and by reviewing content of journals. Quantitative meta-analysis was performed by SAS program. Results: Among 66 articles, 11 studies were selected for quantitative meta-analysis. The knowledge level about pulmonary tuberculosis had more effect for only sick role behavior as general characterisitcs(d=0.7870). All the components of health belief model produced significant effects on sick role behavior with the magnitude of effect size from 0.31 to 0.73. The largest effects were benefits on actions of sick role behavior. Conclusions: Overall, these investigation provide very substantial empirical evidence supporting health belief model dimensions as important contributors to the explanation and prediction of sick role behavior among the type of health related behavior in pulmonary tuberculosis patients. Strategic intervention including health education, etc. based on health belief model showed clear advantage in improvement of behavioral change.

• KDI Journal of Economic Policy
• /
• v.32 no.2
• /
• pp.93-143
• /
• 2010

This paper estimates the impact of Japan's economic sanction on DPRK trade in the 2000s. It conceptualizes the effects of sanction on DPRK trade, econometrically tests whether such effects exist in case of Japan's sanction using currently available DPRK trade statistics, and measures the size of the effects by correcting and reconfiguring the deficiencies of the currently available DPRK trade statistics. The main findings of the paper are as follows. First, Japan's sanction can have two different effects on DPRK trade: 'Sanction Country Effect' and "Third Country Effect.' The former means that the sanction diminishes DPRK trade with Japan while the latter refers to the effects on DPRK trade with other countries as well. The third country effect can arise not simply because the DPRK changes its trade routes to circumvent the sanction, but because the sanction forces the DPRK to readjust its major trade items and patterns. Second, currently no official DPRK trade statistics are available. Thus, the so-called mirror data referring to DPRK trading partners' statistics should be employed for the analysis of the sanction effects. However, all currently available mirror data suffer from three fundamental problems: 1) they may omit the real trade partners of the DPRK; 2) they may confuse ROK trade with DPRK trade; 3) they cannot distinguish non-commercial trade from commercial trade, whereas only the latter concerns Japan's sanction. Considering those problems, we have to adopt the following method in order to reach a reasonable conclusion about the sanction effect. That is, we should repeat the same analysis using all different mirror data currently available, which include KOTRA, IMF and UN Commodity Trade Statistics, and then discuss only the common results from them. Third, currently available mirror data make the following points. 1) DPRK trade is well explained by the gravity model. 2) Japan's sanction has not only the sanction country effect but also the third country effect on DPRK trade. 3) The third country effect occurs differently on DPRK export and import. In case of export, the mirror statistics reveal positive (+) third country effects on all of the major trade partners of the DPRK, including South Korea, China and Thailand. However, on DPRK import, such third country effects are not statistically significant even for South Korea and China. 4) This suggests that Japan's sanction has greater effects on DPRK import rather than its export. Fourth, as far as DPRK export is concerned, it is possible to resolve the abovementioned fundamental problems of mirror data and thus reconstruct more accurate statistics on DPRK trade. Those reconstructed statistics lead us to following conclusions. 1) Japan's economic sanction diminished DPRK's export to Japan from 2004 to 2006 by 103 million dollars on annual average (Sanction Country Effect). It comprises around 60 percent of DPRK's export to Japan in 2003. 2) However, for the same period, the DPRK diverted its exports to other countries to cope up with Japan's sanction, and as a result its export to other countries increased by 85 million dollars on annual average (Third Country Effect). 3) This means that more than 80 per cent of the sanction country effect was made up for by the third country effect. And the actual size of impact that Japan's sanction made on DPRK export in total was merely 30 million dollars on annual average. 4) The third country effect occurred mostly in inter-Korean trade. In fact, Japan's sanction increased DPRK export to the ROK by 72 million dollars on annual average. In contrast, there was no statistically significant increase in DPRK export to China caused by Japan's sanction. 5) It means that the DPRK confronted Japan's sanction and mitigated its impact primarily by using inter-Korean trade and thus the ROK. Fifth, two things should be noted concerning the fourth results above. 1) The results capture the third country effect caused only by trade transfer. Facing Japan's sanction, the DPRK could transfer its existing trade with Japan to other countries. Also it could change its main export items and increase the export of those new items to other countries as mentioned in the first result. However, the fourth results above reflect only the former, not the latter. 2) Although Japan's sanction did not make a huge impact on DPRK export, it might not be necessarily true for DPRK import. Indeed the currently available mirror statistics suggest that Japan's sanction has greater effects on DPRK import. Hence it would not be wise to argue that Japan's sanction did not have much impact on DPRK trade in general, simply using the fourth result above.

• Korean Journal of Food Science and Technology
• /
• v.30 no.2
• /
• pp.425-433
• /
• 1998

The characteristics of the reaction of calcium carbonate $(CaCO_3)$ immobilized with alginate as buffer system for the high concentration cultivation of bifidobacteria in fermenter are described by the mathematical model, and tested for the reusing possibility of the used $CaCO_3$ beads. When$CaCO_3$ beads with the various diameters were reacted in 0.1 M of the mixed organic acids (0.6 M of acetic acid and 0.4 M lactic acid) and in fermenter inoculated Bifidobacterium longum ATCC 15707, the change of bead diameters can be calculated with the amount of the decreased $CaCO_3$ from the surface of bead using the mathematical model. These values was similar to the directly measured bead diameter by a micrometer. Therefore, it was considered that the mathematical model could be used for explaining the reaction charateristics of the $CaCO_3$ bead reacted with the organic acids. When Bifidobacterium longum was incubated at $37^{\circ}C$ for 20 hours in fermenter with $CaCO_3$ beads, the buffering effect of $CaCO_3$, the reduce rate of the bead diameter, and the growth rate of Bifidobacterium longum were higher at the smaller beads than beads with the larger diameters. Also, when Bifidobacterium longum was incubated in fermenter with the mixed beads which were added new beads to the recovered beads in order to equalize with the total surface area of initial beads, the buffering effect of $CaCO_3$ bead and the growth rate of Bifidobacterium longum were very corresponded with the results of the fermentation using the only initial beads. Therfore, it is expected that the used beads can be reused by adding the initial beads.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.3
• /
• pp.327-334
• /
• 2018

Objective: The objective of the present study was to validate genes and genomic regions associated with carcass weight using a low-density single nucleotide polymorphism (SNP) Chip in Hanwoo cattle breed. Methods: Commercial Hanwoo steers (n = 220) were genotyped with 20K GeneSeek genomic profiler BeadChip. After applying the quality control of criteria of a call rate ${\geq}90%$ and minor allele frequency (MAF) ${\geq}0.01$, a total of 15,235 autosomal SNPs were left for genome-wide association (GWA) analysis. The GWA tests were performed using single-locus mixed linear model. Age at slaughter was fitted as fixed effect and sire included as a covariate. The level of genome-wide significance was set at $3.28{\times}10^{-6}$ (0.05/15,235), corresponding to Bonferroni correction for 15,235 multiple independent tests. Results: By employing EMMAX approach which is based on a mixed linear model and accounts for population stratification and relatedness, we identified 17 and 16 loci significantly (p<0.001) associated with carcass weight for the additive and dominant models, respectively. The second most significant (p = 0.000049) SNP (ARS-BFGL-NGS-28234) on bovine chromosome 4 (BTA4) at 21 Mb had an allele substitution effect of 43.45 kg. Some of the identified regions on BTA2, 6, 14, 22, and 24 were previously reported to be associated with quantitative trait loci for carcass weight in several beef cattle breeds. Conclusion: This is the first genome-wide association study using SNP chips on commercial Hanwoo steers, and some of the loci newly identified in this study may help to better DNA markers that determine increased beef production in commercial Hanwoo cattle. Further studies using a larger sample size will allow confirmation of the candidates identified in this study.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.3
• /
• pp.640-655
• /
• 2018

Recently, the construction of the urban area has been rapidly increasing, and the excavation work of the ground has been frequently performed at the upper part of the existing underground structures. Especially, when the structure is constructed after the excavation of the ground, the loading and unloading process in the ground under the excavation basement can affect the existing underground structures. Therefore, in order to maintain the stability of the existing underground structure due to the excavation of the ground, it is necessary to accurately grasp the influence of the excavation and the structure load in the adjoining part. In this study, the effect of the excavation of the ground and the new structure load on the existing tunnel was experimentally implemented and the influence of the adjacent construction on the existing tunnel was investigated. For this purpose a large testing model with 1/5 scale of the actual size was manufactured. The influence of ground excavation, width of the load due to new structure, and distance between centers of tunnel and of excavation on the existing tunnel was investigated. In this study, it was confirmed that the influence on the existing tunnel gets larger, as the excavation depth get deeper. At the same distance, it was confirmed that the tunnel displacement increased up to three times according to the increase of the building load width. That is, the load width influences the existing tunnel larger than the excavation depth. As the impact of the distance between centers of tunnel and of excavation, it was confirmed that tunnel crown displacement decreased by 48%. The result showed that a tunnel is located in the range of 1D (D: tunnel diameter) from the center of excavation, the effect of excavation is the largest.