• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1388-1393
• /
• 2004

Investigators have been perplexed with the thermal phenomena behind the recently discovered nanofluids, fluids with unprecedented stability of suspended nanoparticles although huge difference in the density of nanoparticles and fluid. For example, nanofluids have anomalously high thermal conductivities at very low fraction, strongly temperature-dependent and size-dependent conductivities, and three-fold higher critical heat flux than that of base fluids. Traditional conductivity theories such as the Maxwell or other macroscale approaches cannot explain why nanofluids have these intriguing features. So in this paper, we devise a theoretical model that accounts for the fundamental role of dynamic nanoparticles in nanofluids. The proposed model not only captures the concentration and temperature-dependent conductivity, but also predicts strongly size-dependent conductivity. Furthermore, we physically explain the new phenomena for nanofluids. In addition, based on a proposed model, the effects of various parameters such as the ratio of thermal conductivity of nanofluids to that of a base fluid, volume fraction, nanoparticle size, and temperature on the thermal conductivities of nanofluids are investigated.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 춘계학술대회 논문집
• /
• pp.105-110
• /
• 1999

Wire electrical discharge machining (WEDM) is one of the unconventional machining processes, which is utilizing electrical energy to remove work-piece. In recent years WEDM used widely in die-sinking industry because WEDM can machine any hard materials if only it has conductivity and can machine accurately to the complex geometry, for fine wire is used in WEDM for the tool electrode. However WEDM is non-contact machining process, which is utilizing discharge phenomena occurring between two electrodes, the size of the machined part is larger than that of the tool electrode size. It is called discharge gap or clearance the difference size between the tool electrode and the machined part in WEDM. By the experiment clearances according to the machining condition was investigated.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.175-176
• /
• 2006

The filling property of the binder treated iron based powder made of atomized iron powder was compared with that of the one made of reduced iron powder. The latter one showed a better filling property than the former one, although the original reduced powder showed a worse flow rate. Changing the particle size distribution of the original atomized powder from wide to narrow like the original reduced iron powder, improved the filling property of the binder treated powder. As a result, the particle size distribution of the original iron powder was found to strongly affect the filling property of the binder treated powder.

• 한국의류학회지
• /
• 제19권4호
• /
• pp.628-636
• /
• 1995

The purpose of this study was to investigate the general distribution trend of drapery according to the material of flare skirt and the body size. 100% polyester and 100% rayon fabrics were chosen to compare the effect on the material type. The results from this study were as follows. (1) Both materials generally had similar trend of drapery (2) The difference of material influenced the shape and the amount of drapery. The amount of drapery in polyester was more than the one in rayon. (3) Rody size didn't significantly influence the shape of grapery. So it is concluded that material type is more important variable than the body size for the drapery.

• Journal of Preventive Medicine and Public Health
• /
• 제22권3호
• /
• pp.323-327
• /
• 1989

Carbon monoxide diffusing capacity(DLco) was evaluated before and after nifedipine administration in coal workers' pneumoconiosis by the size of radioopacity. Nifedipine was administered to 18 men and 17 men of small round opacity group and large opacity group respectively. Placebo was administered to 19 men and 15 men of small and large opacity group respectively. In large opacity group DLco was increased after nifedipine administration. But, it was not significant statistically(0.05

• Current Optics and Photonics
• /
• 제5권1호
• /
• pp.16-22
• /
• 2021

We present the Shannon entropy as an indicator of the spatial resolutions of the morphologies of the resonance mode patterns in an optical resonator. We obtain each optimized number of mesh points, one of minimum size and the other of maximum one. The optimized mesh-point number of minimum size is determined by the identifiable quantum number through a chi-squared test, whereas the saturation of the difference between Shannon entropies corresponds to the other mesh-point number of maximum size. We also show that the optimized minimum mesh-point increases as the (real) wave number increases and approximates the proportionality constant between them.

• Geomechanics and Engineering
• /
• 제24권6호
• /
• pp.589-597
• /
• 2021

The present study evaluates geocell reinforced slope behavior. A three dimensional analysis is carried out to simulate soil and geocell elastoplastic behavior using the finite difference software FLAC3D. In order to investigate the geocell reinforcement effect, the geocell aperture size, thickness, geocell placement condition and soil compaction had been considered as variable parameters. Moreover, a comparison is evaluated between geocell reinforcing system and conventional planar reinforcement. The obtained results showed that the pocket size, thickness and soil compaction have considerable influence on the geocell reinforcement slope performance. Moreover, it was found that the critical sliding surface was bounded by the first geocell reinforcement and the slope stability increases, by increasing the vertical space between geocell layers. In addition, the comparison between geocell and geogrid reinforcement indicates the efficiency of using cellular honeycomb geosynthetic reinforcement.

• Nuclear Engineering and Technology
• /
• 제54권5호
• /
• pp.1541-1548
• /
• 2022

The thermal conductivity of uranium oxide (UO₂) containing pores and grain boundaries is investigated using continuum-level simulations based on the finite-difference method in two and three dimensions. Steady-state heat conduction is solved on microstructures generated from the phase-field model of the porous polycrystal to calculate the effective thermal conductivity of the domain. The effects of porosity, pore size, and grain size on the effective thermal conductivity of UO₂ are quantified. Using simulation results, a new empirical model is developed to predict the effective thermal conductivity of porous polycrystalline UO₂ fuel as a function of porosity and grain size.

• Journal of Chest Surgery
• /
• 제20권1호
• /
• pp.71-80
• /
• 1987

Twenty six patients were operated a total correction of tetralogy of Fallot between Jan., 1984 and July, 1985 at the Dept. of thoracic and cardiovascular surgery, Chonnam University Medical School, and a comparison between the survived group [n = 18] and the dead group [n = B was performed to detect factors influencing laboratory data, cineangiographic findings, operative findings and methods, and pump time. Following results were obtained, 1. There was no significant difference between two groups in the preoperative P.O2 and hematocrit level. 2. The size of the interventricular defect was not related to the operative mortality. 3. There was a significant difference in mortality rate between combined type of stenosis of pulmonary artery, valve and infundibulum and other types of right ventricular outflow tract stenosis. 4. There was a significant difference in mortality rate between the transannular patch reconstruction and other types of operative procedure. 5. There was no significant difference between two groups in total bypass time and aortic time. 6. There was no significant difference between two groups in left ventricular end diastolic volume and right ventricular end diastolic volume. 7. The operative mortality was related to the ratio of the diameter of the pulmonary valve annulus or each pulmonary artery to the ascending or descending aorta in cineangiographic findings, but there was no statistical significance of which probably is due to the lack of the total number of patients.

• 한국조명전기설비학회지:조명전기설비
• /
• 제10권6호
• /
• pp.88-95
• /
• 1996

초음파 모터(ultrasonic motor : USM)는 압전 세라믹소자(piezoelectric ceramics)의 초음파 진동을 이용한 마찰 구동형 모터이다. 기존의 전자식 모터와는 달리 자기화로 즉 철심과 코일이 없는 단순 구조를 갖는 특수 소형 모터로서 저속 고토오크의 특성을 지니고 있으므로 다이랙트 드라이브 방식의 액츄에이터로 활용이 가능하다. 그리고 자장이 강한 특수 환경에서도 외란의 영향을 받지 않아도 산업계 전바에 걸쳐 제어용 모터로서 높이 평가받고 있다. 따라서 실용화를 위한 여러 가지 파라미터에 대한 특성 실험과 그에 따른 제어법 개발이 시급하다. 본 논문에서는 2상 입력 전원의 전압차 제어(voltags)를 제안한다. 먼저 전압차 제어에 의하여 이론적으로 고찰하고 초음파 모터의 구동원이 되는 고정자의 한 질점에서 발생하는 타원 궤적을 시뮬레이션을 통하여 알아봄으로써 초음파 모터의 속도와 토오크 특성을 예측하였다. 그리고 입력 전압워 전압차를 조절하여 초음파 모터의 속도와 토오트 특성을 실험하였다. 그 결과를 토대로 전압차 제어가 초음파 모터의 새로운 구동 방식이 될 수 있음을 밝혔다.