• 광물과 암석
• /
• 제36권3호
• /
• pp.213-220
• /
• 2023

본 연구에서는 고압 환경에서 합성된 결정 입자의 크기에 원시료(starting materials)의 상(phase)이 미치는 영향을 확인했다. 상이 다른 두 가지 원시료인 비정질 시료와 나노파우더 시료를 이용해 알루미늄이 부화된 고압의 환원환경에서 삼원계 시스템인 브리지마나이트-페리클레이스-칼슘 페라이트(calcium ferrite)상의 MgAl₂O₄을 합성했다. 시료는 40 GPa 2000 K의 압력온도 조건에서 20 시간 동안 가열하여 합성했다. 합성된 시료는 비정질 시료를 이용한 경우 입자 크기가 50-200 nm였으며, 나노파우더를 이용한 경우 ~500 nm로 나타났다. 이러한 차이는 1) 시료가 합성된 2000 K의 온도가 낮아 비정질 시료의 경우 결정 성장보다 결정핵 성장이 더 우세하게 나타났거나 2) 시료에 존재할 수 있는 산화 환원반응 상태의 차이로 생각된다. 추후 다원계 시스템에 대한 고압 실험을 수행할 때 비정질 시료보다 나노파우더를 원시료로 이용하는 것이 결정 성장에서 더 유리할 것으로 생각된다.

• 열처리공학회지
• /
• 제22권2호
• /
• pp.75-79
• /
• 2009

Precipitate formations and grain size variations in various Mg-Sn-Zn alloys have been investigated and their effects on the tensile properties and sheet metal formability were evaluated. MgSn and MgZn precipitates were observed in the alloy sheets, however any clear difference in morphology or size for the precipitates could not be found even though MgSn precipitates tend to be larger than MgZn. The highest formability in terms of conical cup value was found in the Mg-4 wt%Sn-2 wt%Zn where the high tensile elongation and the reduced grain coarsening at elevated temperatures were observed.

• 대한인간공학회지
• /
• 제25권2호
• /
• pp.71-76
• /
• 2006

The goal of this research is to analyze the Korean anthropometric data collected through Project "Size Korea" by ATS from 2003 to 2004, to extract the characteristics for each age and sex group, and to establish an extensive reference for designers of related products. The result shows that the characteristics of Korean anthropometric data have the different ratio and distribution among mutually related factors for different age and sex. Especially, the difference between two groups, those in their twenties and those in their fifties and above, are huge, indicating that there are drastic changes in the data for recent decades. The result of this research can be used for the design of furniture, clothes and workplace, where there are different target ranges for specific age and sex.

• Environmental Engineering Research
• /
• 제13권2호
• /
• pp.73-78
• /
• 2008

For a given soil-contaminated site, a level of soil contamination is characterized and decisions on risk may be made from the risk assessment. The study evaluated critical design factors for the determination of sample size in the sampling design plan and the assessment of soil contaminant- leaching to groundwater. Two variables, the minimum relative detectable difference (T) and coefficient of variation (CV) were evaluated for the sample size determination. The minimum number of samples can be appropriately determined by CV under a T value greater than or equal to 0.2. Soil-contaminant leaching to groundwater was evaluated by using the Soil Screening Level equation of U.S. Environmental Protection Agency and the Risk Based Screening Level equation of American Society for Testing and Materials, with the same input parameters. The groundwater concentrations estimated from soil contaminant concentrations were significantly affected by the Darcy velocity of groundwater and the organic content of soil.

• 전자공학회논문지B
• /
• 제31B권1호
• /
• pp.72-80
• /
• 1994

In this paper, a new variable block-size transform coding algorithm using information of segmentation is proposed. In general variable block-size transform coding algorithms, the information which is used to form variable blocks is thrown away, but in the proposed algorithm, the information of segmentation which is composed of texture and contour information is maintained for efficient coding. That is, the number of blocks can be reduced by contour information, a DC component of block can be predicted by texture information, and the region compensation, which reduces mean difference between regions, using texture and contour information can diminish the magnitude of AC components. The result is that the proposed algorithm has improved highly the coding efficiency of DC and AC components.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1992년도 가을 학술발표회 논문집
• /
• pp.155-160
• /
• 1992

In this study , the size effect on diagonal shear failure of reinforced high strength concrete beams was investigated, For this purpose, ten singly reinforced high strength concrete beams without web reinforcement were tested for five different dimensions of effective depth which were varied from 67mm to 915mm. The compressive strength of concrete used in this study was 53.7 MPa. One type of reinforcing bar with nominal yield strength of 400 MPa was used. Test results were analyzed and compared with strength predicted by ACI code equation, Zutty's equation and Bazant &Kim's equation. As the results, ACI code equation was seriously unconservative for beams with d of 915mm. Bazant & Kim's equation predicted well the trend of test data. Within the scope of this study, there was no clear difference in size effect with variation of compressive strength of concrete.

• 설비공학논문집
• /
• 제15권12호
• /
• pp.1035-1042
• /
• 2003

As the desire for a better condition in classroom increases, the distribution rate of warming and cooling conditioners increases. But it is known that according to the way by which the equipments put and are operated the comfortableness felt by persons who are in classroom can make a difference. Therefore, proper equipments in accordance with the size of classroom should be considered as well as operational methods when ceiling warming and cooling conditioners put. This study makes conclusions as follows through a simulation to get improvements in accordance with the size of classroom and to improve the heating performance of ceiling warming and cooling conditioners in classroom.

• 한국세라믹학회지
• /
• 제32권3호
• /
• pp.366-370
• /
• 1995

The ballistic efficiency of alumina tiles with various sizes, shapes, and target configurations was measured by the thick backing plate technique. The ballistic efficiency of square tiles roughly 8 mm thick struck by 12.7mm diameter bullets rapidly increased with tile size up to about 100mm, then tended to saturate. Circular shape tiles had lower ballistic efficiencies than those of square shape tiles for the same width and thickness. Small tiles (50mm) that were recessed in aluminum wells had a significantly higher ballistic efficiency than tiles placed on a flat surface. However, the difference in the ballistic efficiency between the two target configurtions became small at larger tile sizes. All the results could be explained by the effect of reflected waves at edges and the propagation of resulting cracks on the penetration process.

• 한국세라믹학회지
• /
• 제29권12호
• /
• pp.956-962
• /
• 1992

The predominant sintering mechanisms of low firing temperature ceramic substrate which consists of borosilicate glass containing alumina as a filler are the rearrangement of alumina particles and the viscous flow of glass powders. In this system, sintering condition depends on the volume ratio of alumina to glass and on the particle size. When the substrate contains about 35 vol% alumina filler and the average alumina particle size is 4 $\mu\textrm{m}$, the best firing condition is obtained at the temperature range of 900∼1000$^{\circ}C$. The extensive rearrangement behavior occurs at these conditions, and the optimum sintering condition is attained by smaller size of glass particles, too. The formation of cristobalite during sintering causes the difference of thermal expansion coefficient between the substrate and Si chip. This phenomenon degradates the capacity of Si chip. Therefore, the crystallization should be prevented. In the alumina filled borosilicate glass system, the crystallization does not occur. This effect may have some relation with aluminum ions in alumina. For aluminum ions diffuse into glass matrix during sintering, functiong as network former.

• 한국세라믹학회지
• /
• 제25권4호
• /
• pp.309-314
• /
• 1988

In this study, the effect of the size of sintered body on resonant and filter characteristics in Pb(Sn1/2Sb1/2)O3-PbTiO3 piezo-electric system were investigated. The attenuation characteristics of ring-dot type and ladder type filter were also investigated. As the size of sintered body was decreased, the resonant characteristic(Fr, Fa) and the center frequency(Fo) were increased. As the poling field was increased, the Kp and bandwidth were increased. The big difference between rign-dot type and ladder type was the sharpness of bandwidth, selectivity and the movement of center frequency.