• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2007년도 제34회 KOSCO SYMPOSIUM 논문집
• /
• pp.107-113
• /
• 2007

The burning characteristics of interacting droplets with internal circulation in a convective flow are numerically investigated at various particle arrangement and size difference. In this simulation some conditions are fixed, surround gas temperature is 1250K, pressure is 10 atm and drolet's initial temperature is 300K. The transient combustion of arranged droplets, the fixed droplet distances of 4 radii to 20 radii horizontally, is studied. And the range of size of droplet is 75${\mu}m$ to 100${\mu}m$. The results obtained from the present numerical analysis reveal that the transient flame configuration and retardation of droplet internal motion with the horizontal spacing substantially influence lifetime of interacting droplets. At a Reynolds number 10, lifetime of the three droplets with decreasing horizontal droplet spacing increases monotonically. But when droplet spacing decreases further to 4radii, Lifetime of interacting droplets are increase. So Lifetime of interacting droplets exhibits a strong dependence on the horizontal droplet spacing and size difference. It can be investigated well with these conditions to that of single burning droplet.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 봄 학술논문 발표대회
• /
• pp.111-112
• /
• 2020

As buildings in South Korea become more skyscrapers, the risk of fire is also emerging. Thus, regulations, regulations, and guidelines are being improved to prevent the spread of smoke in the event of a fire in high-rise buildings, but research on smoke flow and pressure distribution in vertical spaces is insufficient. Therefore, in this study, the temperature of each floor in the vertical space according to the size of the fire is measured through the miniature model experiment, and the pressure difference is calculated to establish the basic data for the improvement of the performance of domestic air supply facilities in the future. Thus, a scale model of one-sixth the size of the actual building was produced to measure the temperature, and the pressure difference was derived by substituting the value for the expression. The pressure difference varies depending on the size of the cause of the fire, and it is believed that the differential pressure and conditions of the building should be taken into account before calculating the supply volume for the analysis of the pressure difference according to the size of the cause of the fire in the event of fire.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권20호
• /
• pp.8951-8955
• /
• 2014

Background: Studies have shown the existence of gender- and age-related differences in the incidence and anatomic distribution of colorectal cancers. The purposes of this study were to analyze the distribution characteristics of colorectal cancer patients regarding gender, age, location and tumor size in the course of colonoscopy. Materials and Methods: All colorectal cancer patients who underwent colonoscopy in the First Affiliated Hospital of Guangxi Medical University from 2003 to 2012 were included in our retrospective study. Demographic information (age and gender) and colonoscopy report information (tumor size and location) were collected and analyzed. To compare the gender differences in tumor location and tumor size, as well as the size differences in tumor location, the chi-square test was used. Results: A total of 3, 369 colorectal cancer patients (2, 007 men vs 1, 362 women) were included in our study. Statistical analysis showed there was no gender difference in the anatomic distribution of the tumors (p>0.05). However, there was a gender difference in tumor size (p<0.05). In addition, our study found there was a significant difference in tumor size between rectal and colon tumors (p<0.001). Conclusions: There was no gender difference in the anatomic distribution of colorectal tumors. In addition, tumors observed in men were larger than in women.

• 대한치과보철학회지
• /
• 제36권1호
• /
• pp.166-182
• /
• 1998

The purposes of this study are to evaluate the Korean mandibular dental arch and classify the mandibular dental arch shape and size based on the incisal angle, canine angle, inter second molar width and height. In this study the mandibular study models were fabricated using irreversible hydrocolloid impression material from 225 volunteers with a mean age 23.62 (range 19-29). And the study models were measured with 3-dimensional measuring device and the mandibular dental arch was classified by means of K-means clustering method and visual inspection, then obtained data were analyzed with t-test for the statistical analysis. The results were as follows ; 1. The average canine height was 5.19mm(s.d. 1.17) in both sex, 5.34mm in male, and 4.95mnm in female. And the sexual difference was significant($0). 2. The average second molar height was 39.81mm(s.d. 2.44) in both sex, 40.19mm in male, and 39.21mm in female. And the sexual difference was significant($0). 3. The average inter-canine width was 27.16mm(s.d. 1.78) in both sex, 27.41mm in male, and 26.77mm in female. And the sexual difference was significant($0). 4. The average inter-first molar width was 46.93mm(s.d. 2.67) in both sex, 47.72mm in male, and 45.7mm in female. And the sexual difference was significant($0). 5. The inter-second molar width was average 56.09mm(s.d. 3.01) in both sex, 57.24mm in male, and 54.32mn in woma. And the sexual difference was significant($0). 6. The arch form was classified into three shapes based on the incisal and canine angle. V-shape showed $124.88^{\circ}$ of incisal angle and $141.64^{\circ}$ of canine angle, U-shape showed $152.76^{\circ}\;and\;125.35^{\circ}$, and O-shape showed $138.03^{\circ}\;and \;33.66^{\circ}$ respectively. Each shape distribution was that the V-shape was 14.2%, the U-Shape was 14.7%, and the O-shape was 71.1% of the 225 study models. 7. It was thought that the use of second molar width is more reasonable than height for classifying the dental arch size. The arch size was classified into four sizes based on the second molar width. Size 1 showed range of 42.24-48.23mm, size 2 showed 48.24-54.23mm, size 3 showed 54.24-60.23mm, and size 4 showed 60.24-66.23mm respectively. Each arch size distribution was that the size 1 was 1.3%, the size 2 was 27.1%, the size 3 was 63.6%, and the size 4 was 8.0% of the 225 study models.

• Bulletin of the Korean Chemical Society
• /
• 제27권8호
• /
• pp.1121-1126
• /
• 2006

Methanol oxidation effect on carbon supported Pt was investigated as a function of Pt content in a sample which is closely correlated with Pt particle sizes. After prolonged methanol oxidation the Pt particle size did not change within the experimental error ranges. The $^{13}C$ chemical shift and linewidth of CO adsorbed on Pt show non-linear behavior simply due to the Pt particle size difference. The Pt size variation difference between this work and the previous reports of the particle growths is explained by the experimental temperature difference.

• 대한인간공학회지
• /
• 제5권1호
• /
• pp.19-28
• /
• 1986

To study the body trunk form which is essential to clothing constructions, necessary body sizes were measured indirect1y from 216 unmarried women from 19 to 24 years old by a photographic network method. The results are obtained as follow; 1) In this study of body type measurements, the four factors of bust, abdomen, column and hip size have been divided into four-stage intervals and given the body type codes 1, 2, 3 and 4, with 1 designating the size difference of the factor with the minimum size difference of the factor with the maximum size difference from waist size. These body type codes can be easily, linguistically interpreted. In this study, among $4^4=256$ possible body types, 54 types appeared frequently. These 54 types are integrated into 6 groups of types by clustering analysis. Representative types of each group are types 3333 and 2333 in group 1, 2233, 1233 and 1332 in group 2, 2222, 1222 and 1223 in group 3, 2223 in group 4, 2323 and 2322 in group 5, and 3323, 3223 and 3322 in group 6. In the types of groups 1, 2, and 3, the change is mainly in bust size, and in the types of group 4. is single type. In the types of group 5 the change is mainly in hip size, and in the types by groups 6 the change is mainly in abdomen size and hip size. 2) The analysis by measuring the four elements of body trunk in reference to waist size is scientific and grading of similar styles is possible in clothing construction. 3) Assuming that the human body is oval, using the calculating method, the size of girth, which cannot be measured by the indirect measuring method, is obtained approximate to actual size, with an error of ${\pm}2.8cm$.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2012년 추계학술대회
• /
• pp.461-471
• /
• 2012

Most useful statistical techniques in six sigma DMAIC are hypothesis testing and interval estimation. So this paper reviews and derives sample size formula by considering significance level, power of detectability and effect difference. The quality practioners can effectively interpret the practical and statistical significance with the rational sample sizing.

• 대한기계학회논문집
• /
• 제8권1호
• /
• pp.34-40
• /
• 1984

In this study, martensite-ferrite dual phase steel composed of martensite in hard phase and ferrite in soft phase is made as model material, and the difference of fatigue crack propagation behavior resulted from the structural size is investigated by fracture mechanics and microstructural method. The main results obtained are as follows; 1)Fatigue crack propagation rate is influenced by ferrite grain size. In other words, in the low .DELTA. K region fatigue crack propagation rate is decreased with decreasing of grain size but the difference of propagation rate resulted from the structural size is decreased as .DELTA.K is increased. 2)The above result is explained by the degree of crack arrest effect of second phase for fatigue crack propagation depending on the ratio of reversed plastic zone size to ferrite grain size.

• 말소리와 음성과학
• /
• 제7권3호
• /
• pp.175-181
• /
• 2015

This study aims to compare the differences between 'consonant inventory size' and 'phonological variability' in order to examine the phonological development and characteristics of the late-talkers and typically developing expressive language agematched children and to consider the correlations between them. The study participants included fifteen late-talkers and fifteen typically developing expressive language age-matched children(TED group). The results are as follows. First, as regards consonant inventory size, there was a significant difference between late-talkers and TED group. The late-talkers' consonant inventory size was less than TED group. Second, as regards phonological variability, there was a significant difference between late-talkers and TED group. The late-talkers' phonological variability was higher than TED group. Third, in the case of late-talkers, there was no significant correlation between consonant inventory size and phonological variability; however in the case of TED group, there was a significant negative correlation between consonant inventory size and phonological variability. Therefore, phonological ability should be considered in evaluation and intervention of late-talkers.

• 대한치과보철학회지
• /
• 제35권1호
• /
• pp.144-164
• /
• 1997

The purpose of this study were to investigate the chemical composition, mean particle size, linear thermal expansion coefficient and metal-bonding strength of the regular opaque powder and core powder. In this study, 4 types of ceramic powders, namely Duceram Jacket Opaque powder, Duceram Opaque powder, Vita Hi-Ceram powder, Vita VMK Paint On-88 powder were used. Chemical composition was evaluated by EDS(Energy Dispersive X-ray Spectrophotometer, Oxford QX-2000, England), particle size was measured by MALVERN Instruments(MALVERN Instruments SB. OC., U.S.A.. ad linear thermal expansion coefficient was measured by dilatometer(Motoyama, Japan). Bond strength was measured by the Universal tsting machine(Istron Co., Ltd., U.S.A.). The Results were as follows : 1. Through recognition of the relative difference in chemical composition between the core powder and the regular opaque powder, the difference in the proportion of $Al_2O_3$ in each type of material is demonstrated ; Duceram Jaket Opaque powder : 30.16%, Duceram Opaque powder : 16.60%, Vita Hi-Ceram : 63.64%, Vita VMK Paint-On 88 : 16.16%. 2. There was no significant difference in the proportion of metal-bonding materials between the core powder and the regular opaque powder. 3. In the regular opaque powder, alkaline materials were incoporated in order to increase the coefficient of thermal expansion. 4. In the particle size analysis, there was no significant difference in mean particle size or in the particle size distribution between the core powder and the regular opaque powder. 5. In the thermal expansion test for temperature range of $25-600^{\circ}C$, the regular opaque powder had higher coefficient of thermal expansion than that of core powder. 6. In the 4 point flexural bending test, there was no statistically significant difference in the mean bond strength between the core powder and the opaque powder among the Duceram products.