• Journal of Welding and Joining
• /
• 제30권5호
• /
• pp.70-75
• /
• 2012

This study is related to the laser weldability of AZ31B magnesium alloy, an all-purpose wrought alloy with good strength and ductility. In general, AZ31B is classified into AZ31B-H24 and AZ31B-O depending on temper designation. Thus, in this study, the laser weldability of AZ31B-H24 and AZ31B-O was investigated and compared. CW Nd:YAG laser was used to produce bead and butt joints. And the effects of welding conditions on the weldability of these joints were examined in detail. As a result of this study, AZ31B-H24 was found to have thinner oxide film and smaller grain size compared with AZ31B-O. Due to such difference, in bead welding, AZ31B-H24 had more wide welding range for full penetration compared with AZ31B-O. Furthermore, it was also confirmed that AZ31B-H24 and AZ31B-O have different welding conditions to obtain stable keyhole in butt welding.

• 대한안전경영과학회지
• /
• 제18권3호
• /
• pp.1-8
• /
• 2016

The definition of an apartment is a building more than 5 stories high and which is the standard law. Currently, the number of apartments is increasing much faster than detached houses. Owning an apartment is a normal trend these days. However, the increasing number of apartments has been increasing the number of apartment fires which also has been making social problems. Therefore, this study was conducted for the fire extinguisher among other fire facilities because it is important for initial fire suppression. The research subject is on the fire extinguisher that is in the underground parking lot of 40 apartment complexes which are more than 10 stories. Survey and analysis were conducted for 80 fire extinguishers. There are two fire extinguishers for each apartment. The result of this study is that all installed fire extinguishers are ABC dry chemical type, 92% of them is 3.3kg and that meet the legal height(less than 1.5m). However, the condition such as appearance, inspection, manufactured year, appearance of signs, material of signs, size of signs, etc. was insufficiency. So improvement of law and system that are fire facility construction, maintenance implementation and additional designation of type approval about sign will be needed in my opinion.

• 한국주거학회논문집
• /
• 제15권3호
• /
• pp.43-51
• /
• 2004

The purpose of this study is to examine the physical characteristics of the detached housing area in the housing site development district. The process of this study is to investigate the characteristics of the physical structure and the building use, then to analyze the relationship of physical structure and the building use in the aspect of the morphological characteristics. The case study focuses on the Chil-kok2, An-Siml in Taegu. The streets pattern is composited gird and loop type mixed. The block is composited by 2 lots in general. But the obscurity of organization and character of the streets, the size and shape of lots which is not fit to the building use. A whole residential characters appears high residential density ratio. so residential environment became worse. The improving level of residential environment and efficiency of land use in the detached housing area of the housing site development district, firstly the propriety of the physical structure must be considered about detached house characters, and the housing uses which fit to the physical structure are needed, and also for the concrete realization of this, the designation of district, the zoning of residential area, the guideline of the district design, and establishment of comprehensive master planning in detached housing area are needed in aspect of the housing policy. As the result of this study, it suggests several design guideline to improve housing site development.

• 한국환경복원기술학회지
• /
• 제23권1호
• /
• pp.37-48
• /
• 2020

This study was aimed to design core areas applied by the global conservation criteria to promote the public awareness to the protected areas and the value cognition of the Key Biodiversity Areas (KBAs), targeting the Mt Seorak, according to the designation of globally important biodiversity areas. As a method for carrying out this study, the biota were cataloged through literature reviews and field trips. With applied by the Global Red List criteria of the International Union for Conservation of Nature (IUCN), only nine species were categorized in the studied area; plants were classified into six species as follows: Megaleranthis saniculifolia ohwi, Bupleurum euphorbioides Nakai, Hanabusaya asiatica Nakai, Thuja koraiensis Nakai, Leontopodium leiolepis Nakai, Androsace cortusaefolia Nakai, fish was classified one species as follow: Pungitius sinensis Tanaka, and the mammal was classified as two species as follows: Hydropotes inermis, Naemorhedus caudatus. According to the occupation area (EoO, Extent of Occurrence) and Minimum Viable Population(MVP), the size of protected area was 234.56㎢ for plants, 235.07㎢ for mammals, and 0.14㎢ for fish, and the Key Biodiversity Area (KBA) of Mt. Seolak suggested as 286.72㎢.

• 한국의류산업학회지
• /
• 제19권1호
• /
• pp.61-69
• /
• 2017

The purpose of this study is to suggest the sizing system of medical compression stockings for Korean adult men in order to develop compression stockings with excellent dimensional fit reflecting the real human body data. Analyses were conducted on the raw data that the subjects consist of 19~60 aged men of Size Korea 2010 in this study. The stature and weight for the pantyhose stockings, and the ankle circumference and calf circumference for the thighs, knees, and calf support types of stockings were selected as the basic dimension items. The size interval of the pantyhose stockings were 2cm in stature and 2kg in weight. In addition, the thigh, knee, and calf support types of stockings were set with ankle circumference and calf circumference set at 1cm intervals. The designation is the same as KS pantyhose standard, S, M, L, XL. As a result, in the case of pantyhose compression stockings for men, the coverage ratio showed 97.2% in total, with 46.3% for M, 36.5% for L, 7.4% for S, and 6.9% for XL. In the case of thigh type, knee type and calf support types, the percentage of coverage was 99.96% in total, with 57.6% in M, 31.1% in L, 4.7% in S, and 1.6% in XL. The results of this study would help to improve the dimensional conformity of the medical compression stockings for Korean adult men.

• 환경영향평가
• /
• 제24권4호
• /
• pp.301-316
• /
• 2015

멸종위기 야생생물인 두루미와 재두루미는 인간에 의한 교란에 취약한 조류이다. 본 연구는 두루미류의 월동지인 철원의 민간인통제지역 중 일부 해제지역의 서식밀도 변화를 비교하여 그 중요성을 검증하고자 하였다. 또한 공사 및 비닐하우스 건설 등 교란에 의해 두루미류 핵심서식지역 범위에 대한 영향을 평가하였다. 연구결과 민간인통제지역 내에서의 공사 및 개간은 두루미류의 핵심서식지를 위축시키고, 원거리의 핵심서식지 면적을 증대시키는 영향이 있었다. 민간인통제지역의 개방은 2011년 3월에 이루어졌는데, 그 이전 이후의 3년간을 비교할 때 비닐하우스의 건립이 급격히 증가하였다. 민간인통제지역에서 해제된 지역은 비닐하우스의 건설이 집중적으로 증가하였고 개별 비닐하우스의 규모도 증가하였으며 이에따라 두루미의 취식영역이 감소하는 영향이 있었다. 하지만 민간인통제지역에서 해제된 지역임에도 불구하고 두루미의 취식밀도는 감소하지 않았고, 재두루미의 취식밀도는 오히려 증가하였는데, 이는 인근의 잠자리지역에 먹이를 공급했기 때문으로 판단되었다. 향후 민간인통제지역이 추가적으로 해제될 경우 두루미류의 서식밀도가 더욱 낮아질 것으로 예상되었다.

• 디지털융복합연구
• /
• 제19권1호
• /
• pp.167-176
• /
• 2021

인천항의 성장을 지속시키고 항만배후단지와 연계된 발전을 추구하기 위해서는 자유무역지역의 지정이 시급히 필요하다. 본 연구는 인천항 자유무역지역 최적 후보지에 대한 입지평가와 정책적 시사점을 도출하는 것을 목적으로 하였으며, 요인 우선순위를 그룹별로 도출하여 비교했다. 본 연구에서는 언어학적 척도를 정량화하고 평가할 수 있는 CFPR(Consistent Fuzzy Preference Relation) 분석기법을 이용하였다. 인천항 자유무역지역의 입지를 평가한 결과, 인천신항 배후부지, 아암물류 2단지, 북항 배후단지, 경인항 배후단지 등 4개 후보지역 중 인천신항 배후부지가 가장 높은 점수를 받았다. 인천신항 배후부지는 정성적·정량적인 요인으로 구성된 총 8개의 평가요인 중 정성적인 요인 4개 모두에서 1위, 정량적 요인 1개 등 종합점수 1위로 인천항 자유무역지역 지정 최적 후보지로 평가되었다. 또한 그룹별 요인 중요도 비교에서는 그룹 1에서는 입주 기업 유치 가능성이 가장 높으며, 그룹 2는 단지 규모, 그리고 그룹 3에서도 입주 기업 유치 가능성이 가장 높은 중요도를 나타냈다. 본 연구는 자유무역지역 입지선정과 평가에 중요한 요인을 제시하였다는 시사점을 갖는다. 향후 연구에서는 연구 대상 확대 또는 각 집단의 이해관계를 반영한 요인선정등 세분화된 실증연구가 필요하다.

• 한국비블리아학회지
• /
• 제32권1호
• /
• pp.151-170
• /
• 2021

도메인이름은 사용자의 웹 접근성과 편의성을 고려하여 최소한으로 등록·사용하여야 하며, 도메인 이름만으로 도서관의 유형과 지역과 특성을 알 수 있도록 함으로서 도서관의 위상과 권위를 높이며, 이용자의 편의성을 고려할 수 있도록 해야 한다. 본 연구에서는 국가 지정 2단계 공공도메인 현황을 조사하고, 도서관과 유사한 성격의 교육기관의 2단계 공공도메인도 분석하여, 교육기관의 수와 비슷한 규모의 도서관이 2단계 도메인을 갖지 못함으로써 나타나는 문제점을 파악하였다. 최종적으로 도서관의 유형별로 국가도서관(nl), 공공도서관(pl), 작은도서관(sl)의 2단계 도메인과 교육기관에 소속된 대학도서관(lib.대학도메인), 학교도서관(lib.학교도메인)은 해당교육기관의 2단계 도메인을 활용하는 것으로 제안하였다. 이는 이용자가 직관적으로 도서관임을 알 수 있고, 도서관의 유형도 구분하며, 도서관의 특성이나 지역도 알 수 있도록 하기 위한 것으로, 학계와 도서관계, 그리고 도서관정보정책위원회의 공동의 노력이 이루어져야 할 것이다.

• 한국의상디자인학회지
• /
• 제16권4호
• /
• pp.217-228
• /
• 2014

The purpose of this study is to grasp inconveniences and improvements by examining wearing condition and satisfaction of protective clothing targeting 114 Korean farmers and to suggest basic data for enhancement of pattern and wearing satisfaction of protective clothing by understanding problems of pesticide-proof clothing through comparative analysis on the size of its commercial products. Most of male subjects were in charge of spraying pesticide, whereas female were most likely to play an assistant role to hold the hose of pesticide applicator. Both of female and male subjects were very aware of the harmful effect of pesticide on human body and tried to take off the clothes immediately after spraying it to reduce possible damage caused by pesticide. As a result of examining wearing condition, the farmers avoided wearing protective clothing because that it feels hot, stuffy, and uncomfortable to move. This hesitant response of wearing the clothing was not shown significantly in case of female subjects who play an assistant role for spraying. Although the farmers wore protective equipments such as mask or gloves in a proper way as compared to protective clothing, they seemed to choose alternative way rather than best way to block pesticide completely. The satisfaction regarding to the fitting of protective clothing which the subjects showed low in all items of upper-lower clothes except waistline. It is necessary to improve the functionality such as relief from heat stress and convenience for movement rather than design or economic in protective clothing development. As a result of comparing the size of five kinds of commercial protective clothing, the farmers got confused to choose the product since designation method of size across companies showed a significant difference in an identical clothing size. In addition, the sizing system developed on a basis of a well-built man has become a hindering factor in wearing satisfaction of female farmers.

• 패션비즈니스
• /
• 제15권1호
• /
• pp.103-114
• /
• 2011

This study is to provide basic information on clothing fitness necessary to develop apparel products for Korean companies that want to enter or have already made inroads into the Chinese market. In an effort to serve this purpose, a standard upper torso body model for Chinese women was established by applying the Rohrer Index and Size Designation of Clothes - Women of GB/T 1335.2-1997 to Chinese women in their 20s to determine body types and its characteristics. First, according to the result of applying the Rohrer Index to categorize body types, Type 1 showed the longest vertical body length and a short horizontal length with the lowest degree of flatness. Type 2 was a standard body type with a height of 158.73cm, weight of 53.02kg and the Rohrer Index of 1.32. Type 3 had a thick and flat body shape that had the highest degree of flatness and the shortest vertical length in its upper torso among all three types of body. Second, F-test was conducted on 4 distinctive body types obtained from comparing obesity scores to verify differences in body shapes for different degree of obesity. The test result indicated significant differences in 3 of the 4 body types and showed different structural components for different degree of obesity. Third, the result of comparing correlational distributions of body types and height range, and body types and degree of obesity for all and specified age groups revealed that about 33.30% of the body types appeared in Type2-A followed by 20.18% in Type1-A, 18.40% in Type2-Y and 7.91% in Type1-Y respectively. Body types and degree of obesity for two different age groups were most frequent in Type2-A. For the group of young women in their early 20s appeared the most in Type2-A, Type1-A, Type2-Y and Type 1-Y respectively and young women in late 20s were frequent in the order of Type2-A, Type2-Y, Type1-A and Type1-Y.