• 대한기관식도과학회:학술대회논문집
• /
• 대한기관식도과학회 2003년도 제3차 추계학술대회
• /
• pp.107-107
• /
• 2003

Purpose; Tracheal transplantation is necessary in patients with extensive tracheal stenosis, congenital lesions and many oncologic conditions but bears many critical problems compared with other organ transplantations. The purpose of this study was to make an intestine-cartilage composite graft for potential application for tracheal reconstruction by free intestinal graft. Methods; Hyaline cartilage was harvested from trachea of 2 weeks old New Zealand White Rabbits. Chondrocytes were isolated and cultured for 8 weeks. Cultured chodrocytes were seeded in the PLGA scaffolds and mixed in pluronic gel. Chondrocyte bearing scaffolds and gel mixture were embedded in submucosal area of stomach and colon of 3kg weighted New Zealand White Rabbits under general anesthesia. 10 weeks after implantation, bowels were harvested for evaluation. Results; We could identify implantation site by gross examination and palpation. Developed cartilage made a good frame for shape memory Microscopic examinations include special stain showed absorption of scaffold and cartilage formation even though not fully matured Conclusion; Intestine-cartilage composite graft could be applicable to future tracheal substitute and needs further Investigations.

• 한국화재소방학회논문지
• /
• 제24권4호
• /
• pp.92-97
• /
• 2010

부산 실내사격장 화재의 원인을 추정하고 화재안전대책을 강구하기 위해 화재 시뮬레이션과 사격장 화재의 사례조사를 수행하였다. 현장조사와 잔류화약 분말에 대한 사격시험도 실시하였다. 총구불꽃과 탄자 받이에서의 스파크의 흔적이 CCTV 녹화영상에 나타나지 않았고, 유탄의 충격에 잔류화약이 점화하지 않았다. 따라서 잠재적 점화원 중 담뱃불이 가장 유력한 점화원으로 추정되었다. 또, 사격실에서의 폭발원인은 폴리우레탄 흡음재와 흡음재에 축적된 잔류화약 분말의 격렬한 연소 때문으로 판단되었다. 한편, 실내 사격장의 안전대책으로 프로파일 폴리우레탄 흡음재의 사용금지, 잔류화약 제거와 철저한 관리, 탄자받이의 강구조물 제거 등이 필요하다.

• 산업기술연구
• /
• 제29권A호
• /
• pp.9-17
• /
• 2009

The main purpose of this work is to analyse damages caused by debris flows during the heavy rainfall at Inje province in Kangwondo, Korea. A series of site investigations have been performed to survey the characteristics of debris flows occurred during the summer season of 2006. It has been found that major losses and costs are triggered by discharge of soil and rock fragments from landslides. During the rainfall unexpectedly high precipitation rate of 113.5mm/hour and 355mm/day was recorded, which could happen at a 80-500 year period. Comparing the period of the rainfall with the time of the landslides, it has been found that the occurrence of the landslides is directly related to heavy rainfalls. At present, several debris barriers have been built at the valleys and natural slopes have been protected by the seed spray method. It is intended to propose an appropriate solutions of restoration of landslide damages and maintenance based on findings from the current study.

• 한국결정학회지
• /
• 제6권2호
• /
• pp.69-74
• /
• 1995

Ge bicrystal 기판 위에 OMVPE 기법을 이용하여 GaAs 에피층을 성장시킴으로써 특정한 교차각을 갖는 GaAs 기울임입계를 제조하였다. 또한 (110) Ge 기판 위에 성장된 GaAs 에피층 내의 쌍정들로부터 ∑ =9 기울임입계들이 생성되었다. 고분해 투과전자현미경을 이용하여 1차 및 2차 쌍정계면들의 구조적 특징들을 고찰하였다. 입계에서의 결합극성은 특정한 회절조건에서 입계 양쪽의 입자로부터 기록된 (200) 수렴성 빔 디스크 내의 HOLZ 선 콘트라스트를 응용하여 파악하였으며, 원자컬럼이나 채널등과 상관된 구조상 콘트라스트 양태를 동일한 사진 내의 1차 쌍정계면 거울면의 콘트라스트로부터 파악하였다. ∑ =9, (115)/(111)[110] 기울입입계는 5-6-7- 모서리 링으로 구성된 단위구조를 나타내며, 입계 양쪽에 놓인 입자들은 입계에서 anti-site type cross-boundary bonding의 분율이 최소화되도록 배향되어 있다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.445-448
• /
• 2006

Mix design of C80A which is applied to the vertical members of The Burj Dubai Tower, the tallest building of the world, was performed so as to meet the requirements of rheological property, mechanical properties & construction sequences based on material analysis in Dubai, UAE. Experimental investigations were carried out to evaluate & optimize the quantities of total binders, the proportions of Micro Silica, Dune Sand & PFA, changes of S/a and the comparison of chemical admixture, etc. Approximately $65,000m^3$ of C80A concrete has been poured to the vertical members since 16-Apr-2006. In the actual application, it was showed that C80A has proper early strength achievement, excellent mechanical properties and satisfactory flowability & workability. The results of extensive site testing can be summarized that the average compressive strength at 28days is 98.8MPa, the average elastic modulus at 28days is 47.8GPa, the flow of concrete after pumping at the height of 250m (L72) was over 500mm.

• KIEAE Journal
• /
• 제13권3호
• /
• pp.111-120
• /
• 2013

The purposes of this study were to investigate the actual state of the indoor thermal and air environment in general apartment houses during winter in Cheongju City, to analyze the related factors with the indoor thermal and air environment, and to make suggestions for the improvement. A series of visiting field investigation was conducted in twenty units between 28th December, 2010, and 11th March, 2011. The field investigations included the measurement of physical indoor environmental conditions, the observation of architectural characteristics and resident's behavior, and the on-site questionnaire survey of residents. The measured values of each units were compared to evaluation standard and were categorized to group by the difference between units. Factors related to the difference of the measured values between the groups were analyzed. The findings are summarized as followed. The indoor temperature of apartment houses during winter in Cheongju City was generally suitable. The relative humidity was slightly dry, while the $CO_2$ concentration was found to be excessively high. The factors related indoor environment were analysed as heating operation, ventilation, gas range use, and hanging out the wash to dry in indoors.

• 터널과지하공간
• /
• 제23권3호
• /
• pp.161-168
• /
• 2013

세계적으로 Modern High-Power TBM을 이용한 터널공사가 점점 많아지고 있다. 특히 오늘날의 고성능 TBM의 개발로 많은 터널공사에서 성공적인 결과를 가져왔으며, TBM 동력의 향상과 커터 등 면판설계 기술의 발달, 및 TBM 굴진율 예측 소프트 웨어의 사용 등으로 터널공사의 자동화, 기계화가 이뤄 졌으며, TBM 장비조달은 OPP 방식을 이용한 발주자 직접 구매 방식이 TBM 선진국에서 효과적으로 사용되고 있다. 최근 많은 나라에서 환경 민원 등의 문제로 인해 도심지의 발파공법사용이 금지되어 TBM을 이용한 터널의 기계화 시공이 세계적인 추세이다.

• Advances in concrete construction
• /
• 제10권3호
• /
• pp.221-236
• /
• 2020

To reduce the CO₂ emissions associated with the manufacture of portland cement (PC), an efficient alternative like an alkali-activated binder (AAB) is the requirement of the industry. To promote the use of AAB in construction activities, a practically implementable mix proportion is required. Owing to the several raw ingredients of AAB concrete and their associated uncertainties, partial replacement of PC by AAB may be adopted instead of complete replacement as per industrial requirements. Hence, the present study aims to determine an optimal proportion for partial replacement of PC with AAB and recommend a technique for it based on site conditions. Three modes of partial replacement are followed: combining all the dry ingredients for AAB and PC followed by the addition of the requisite liquids (PAM); combining the PC and the AAB concrete in two horizontal layers (PAH); and two vertical layers (PAV). 28-day old specimens are exposed to 10% v/v solutions of HCl, H₂SO₄, and HNO₃ to evaluate changes in mechanical, physical, and microstructural characteristics through compressive strength, corrosion depth, and microscopy. Based on deterioration in strength and integrity, PAH or PAV can be adopted in absence of acid attack, whereas PAM is recommended in presence of acid attack.

• 지구물리와물리탐사
• /
• 제6권4호
• /
• pp.187-194
• /
• 2003

다중 주파수 소형루프 전자탐사법은 가탐심도의 한계에도 불구하고 조사가 신속하고 비용이 저렴하다는 장점을 가지고 있다. 따라서 이 방법은 각종 지반조사 및 환경문제의 해결을 위하여 널리 사용되고 있다. 본 논문에서는 소형루프 전자탐사 자료를 이용하여 지하의 2차원 영상화 기법을 개발하였다. 지하의 전기비저항 분포를 영상화하기 위하여 주파수 수직탐사 자료에 대한 1차원 역산법을 사용하였다. 이론 자료에 대한 역산결과 지하의 전기비저항 구조에 대한 양호한 영상을 구현할 수 있었다. 또한 강원도 춘천에 위치한 농장에서 획득한 현장자료를 사용하여 전기비저항 2차원 단면을 작성하고, 이를 쌍극자 배열 전기비저항 탐사 결과와 비교, 검토하였다.

• Nuclear Engineering and Technology
• /
• 제53권12호
• /
• pp.4052-4059
• /
• 2021

The microstructure of the fuel pellet plays an essential role in fission gas buildup and release and is critical for the safe and continued operation of nuclear power stations. Structural analysis of uranium dioxide (UO₂)-molybdenum (Mo) composite fuel pellets prepared at a range of sintering temperatures from 1300 to 1800 ℃ was performed. Mo micro and nanoparticles were used in making the composite pellets. A systematic investigation into the influence of processing parameters during Spark Plasma Sintering (SPS) of the pellets on the microstructure, texture, grain size, and grain boundary characters of UO₂-Mo is presented. UO₂-Mo composite show significant differences in the fraction of general boundaries and also special/coincident site lattice (CSL) boundaries. EBSD orientation maps demonstrated that <111> texturing was observed in the pellets fabricated at 1500 ℃. The experimental investigations suggest that UO₂-Mo composite pellets have favorable microstructural features compared to the UO₂ pellet.