• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.543-544
• /
• 2006

The effect of the additives, $Y_2O_3$ and MgO, on the sintering and properties of $Al_2O_3-TiC$ composites was investigated. It is known that MgO is used as additive for improving densification and $Y_2O_3$ is applied as sintering aid. In this study, the amounts of TiC were varied in the range of 30-47 wt%. The 0.5 wt% MgO and also varied amounts of $Y_2O_3$ from 0.3 to 1 wt% were added into the composites. The sintering of $Al_2O_3-TiC$ composites was performed in a graphite-heating element furnace at different sintering temperature, 1700 and $1900\;^{\circ}C$, for 2 hr under an argon atmosphere. The results demonstrated that the properties of the composites sintered at $1700\;^{\circ}C$ were much better than those sintered at $1900\;^{\circ}C$. The comparisons on physical properties, mechanical properties and microstructure of composites with and without additives were reported. Comparing with other samples, $Al_2O_3-30wt%TiC$ composites with 0.5wt% MgO and $1\;wt%Y_2O_3$ exhibited the highest density of approximately 98% of theoretical and flexural strength of 302 MPa.

• 한국세라믹학회지
• /
• 제32권10호
• /
• pp.1162-1168
• /
• 1995

Systematic studies of the effects of additives and processing variables on the sintered density and the effect of crystalline forms of starting powders on the microstructure of pressureless sintered silicon carbide are described. Oxide additives were effective for the densification of SiC up to 96% of theoretical density at temperature as low as 185$0^{\circ}C$. Use of embedding powder increased the sintered density, up to 98% of theoretical density, by decreasing the weight loss during sintering. Composite type duplex microstructure has been developed due to the $\beta$longrightarrow$\alpha$ phase transformation of SiC by sintering at 185$0^{\circ}C$ and heat treatment at 195$0^{\circ}C$ for 1h.

• 한국세라믹학회지
• /
• 제32권10호
• /
• pp.1111-1116
• /
• 1995

To use dielectric material of high power multilayer capacitor, the composition of the commercial CaTiO3 was changed to decrease the sintering temperature, and the physical and electrical properties were investigated. Series of experiments showed that CaTiO3 with sintering additives had the highest density, the highest shrinkage, the lowest dielectric constant, the lowest loss factor, and the lowest temperature coefficient of capacitance (TCC). These properties had the constant values at sintering temperature of above 120$0^{\circ}C$.

• 한국세라믹학회지
• /
• 제44권7호
• /
• pp.354-357
• /
• 2007

The nitriding and post-sintering behavior of silicon powder compact containing sintering additives of 2.3 wt% and 7 wt% were investigated in this study. Regardless of the liquid phase content, elongated large grains of a typical morphology evolved in the post-sintered specimens. Phase analysis revealed a complete phase transformation into ${\beta}-Si_3N_4$ in both porous systems. Oxynitride second phases (mellilite) precipitated in the latter, while those were free in the former containing less amount of liquid phase. The post-sintering condition that yielded a favorable microstructure for a filter application was achieved when the specimens were soaked at $1800^{\circ}C$ for 2 h. It was found that the thermal conductivity of porous $Si_3N_4$ ceramics is dominated by the porosity more than this factor is influenced by the addition of $Al_2O_3$.

• 한국세라믹학회지
• /
• 제54권1호
• /
• pp.43-48
• /
• 2017

In this study, we investigate the effect of additive size on the densification and thermal conductivity of AlN ceramics with $MgO-CaO-Al_2O_3-SiO_2$ (MCAS) additives. Micro-sized MCAS powder prepared via melting and nano-sized MCAS powder synthesized via the polymeric complex method are used as sintering additives. We analyze the densification behavior of AlN added with 5 wt.% of MCAS by dilatometry as well as by isothermal sintering in the temperature range of $1300{\sim}1700^{\circ}C$. AlN exhibits higher sinterability with nano-MCAS than with micro-MCAS, and both specimens approach their maximum densities when sintered at $1600^{\circ}C$ for 4 h. The thermal conductivities of AlN with 5 wt% of nano- and micro-MCAS additives sintered at $1600^{\circ}C$ are 82.6 and 32.0 W/mK, respectively. We find that nano-MCAS is more effective in sintering of AlN ceramics at lower temperatures, and thus for enhancing their thermal conductivities.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1991년도 추계학술대회 논문집
• /
• pp.37-39
• /
• 1991

This paper is studies the effects of additives on the magnetic properties of Sr-ferrite. The specimens have been composed of SrO and Fe$_2$O$_3$with ratio of 1:5.9. As 1st additives, it is mixed to 0.2wt%, 0.7wt% and 1wt% of CaCo$_3$with 0.3wt% SiO$_2$. As 2nd addition, it is mixed to 0.5wt%, 1wt% of Na$_2$SiO$_3$, 0.5wt%, 1wt% of Cr$_2$O$_3$and 0.5wt%, 1wt% of Al$_2$O$_3$and sintering conditions was carried out at 1210$^{\circ}C$, 1230$^{\circ}C$ and 1250$^{\circ}C$. From experiments on the magnetic properties of specimen, the results were shown follows; (1) In case of additive SiO$_2$and CaO, it is stable magnetoplumbite structure for liquid phase grown, enhances mignetic propertics. (2) In case of basic compositions + 0.5wt% Al$_2$O$_3$, it is confirmed better properties by increasing of the coercivity than 0.5wt% Cr$_2$O$_3$additives. (3) In case of mixed additives of Cr$_2$O$_3$and Al$_2$O$_3$, magnetic propeties decrease with sintering density.

• 한국재료학회지
• /
• 제5권8호
• /
• pp.921-928
• /
• 1995

MoSi$_2$heating elements were fabricated using MoSi$_2$, powder prepared by SHS. Their apparent density, electrical resistivity, bending strength and victors hardness were measured as a function of sintering temperature, time and the amount of ceramic additives. The additives were A1$_2$O$_3$, SiO$_2$and bentonite which were added as a plastisizer. The electrical resistivity of MoSi$_2$decreased with the increase in the apparent density as expected. It decreased when the additives were added and the increase was the largest for the case of SiO$_2$. The bending strength and hardness decreased when the grain size becomes larger which is opposite to the expectation from the Hall-Petch type relation. Instead, they showed inverse proportionality with the volume fraction of pores probably in an exponential manner. The strength and hardness also decreased with the additives.

• 한국세라믹학회지
• /
• 제50권6호
• /
• pp.416-422
• /
• 2013

Cullet-loess tile bodies are successfully fabricated using cullet, loess, hollow microspheres, and sintering additives (borosilicate glass frit, boric acid, or fumed silica) as starting materials. The effects of the additive composition and sintering temperature on the sintered density and flexural strength of the cullet-loess tile bodies are investigated. The sintered density of the cullet-loess tile bodies increases with an increase in the sintering temperature as a result of the enhanced densification of pore walls through the viscous flow of a liquid phase formed from the glass frit and sintering additives. The flexural strength of the cullet-loess tile bodies increases with increases in the sintering temperature and the cullet content in the starting composition. A maximal flexural strength of 40 MPa is obtained in cullet-loess tile bodies sintered with glass frit at $800^{\circ}C$ in air.

• 한국분말재료학회지
• /
• 제26권5호
• /
• pp.415-420
• /
• 2019

SiAlON ceramics are used as ceramic cutting tools for heat-resistant super alloys (HRSAs) due to their excellent fracture toughness and thermal properties. They are manufactured from nitride and oxide raw materials. Mixtures of nitrides and oxides are densified via liquid phase sintering by using gas pressure sintering. Rare earth oxides, when used as sintering additives, affect the color and mechanical properties of SiAlON. Moreover, these sintering additives influence the cutting performance. In this study, we have prepared $Yb_{m/3}Si_{12-(m+n)}Al_{m+n}O_nN_{16-n}$ (m = 0.5; n = 0.5, 1.0) ceramics and manufactured SiAlON ceramics, which resulted in different colors. In addition, the characteristics of the sintered SiAlON ceramics such as fracture toughness and microstructure have been investigated and results of the cutting test have been analyzed.

• 한국결정성장학회지
• /
• 제34권3호
• /
• pp.98-102
• /
• 2024

본 연구에서는 ㎛ 및 nm 크기를 갖는 상용 AlN 분말을 XRD 분석을 통해 선별 후, 유도가열로를 활용하여 상이한 온도에서 소결하여 최적화된 소결 온도 및 물성 특성을 조사하였다. 소결 온도는 1,500, 1,700 그리고 1,900℃ N₂ 분위기에서 진행되었으며, 소결된 AlN 펠렛은 SEM, XRD, Raman 분석을 이용하여 최적화된 소결 온도 조건을 확립하였다. 또한 Impedance 분석을 진행하여 소결 조제 없이 제작된 AlN 펠렛의 전기적 특성을 확인하였다.