• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.2
• /
• pp.324-331
• /
• 1998

After the addition of yttrium aluminum garnet of 2, 5, 10 mol% as a sintering aid, $\alpha$-silicon carbides were prepared by a liquid-phase sintering at $1850^{\circ}C$, and the microstructural evolution was investigated during sintering as functions of liquid-phase amount and sintering time. The highest apparent density in each compositions was obtained in specimens sintered for 2 h, and the percentage of weight loss increased with sintering time. By increasing the amount of sintering aid (yttrium aluminum garnet), the rate of grain growth during sintering decreased, but the apparent density of sintered body increased. The phase transformation from 6H-SiC to 4H-SiC was partially observed in specimens sintered for a long time, and so, a few rod-like grains were observed.

• Journal of the Korean Ceramic Society
• /
• v.41 no.9
• /
• pp.715-721
• /
• 2004

Hydroxyapatite (HAp)/Gelatin (GEL) homogeneous composites of four different composition ratio were prepared by the co-precipitation process with synthetic HAp and GEL as a binder, HAP/GEL composites were molding by cold isostatic pressing and were sintering by various condition in air. Crystallinity and structure of sintered HAp/GEL composites were investigated by XRD and FTIR. Also, the compressive strength and the fracture surface of sintered specimens were measured by UTM and SEM. HAp/GEL composites showed a phase transformation to partially ${\alpha}$, ${\beta}$-tricalcium phosphate at the sintered condition of 1200$^{\circ}C$ for 3 h. The porosity of sintered body was in the range of 1.2-30.2％. The compressive strength of the sintered specimens was in the range of 16.2-60.1㎫, and its strength of sintered HAp/GEL comosites was higher than expected when the porosity was considered.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2004.04a
• /
• pp.25-25
• /
• 2004

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.04a
• /
• pp.61.2-61
• /
• 2003

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.10a
• /
• pp.67.2-67
• /
• 2003

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2004.05a
• /
• pp.49-49
• /
• 2004

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2018.11a
• /
• pp.295-296
• /
• 2018

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1997.06a
• /
• pp.19-22
• /
• 1997

The surface modificaion of alumina by $Al_2$O$_3$/SiC nanocomposite coating was studied in terms of processing and microstructure. A powder slurry of 5 vol% SiC composition was dipcoated onto presintered alumina bodies and pressurelessly sintered at 1$700^{\circ}C$ for 2 h in $N_2$. The used of organic binder and plasticizer in the slurry preparation, and the control of the density of presintered alumina body were found to be necessary to avoid cracking and warping during processing. The nanocomposite coating well bonded to the alumina body with thickness about 110 ${\mu}{\textrm}{m}$. The average grain size of coating (2 ${\mu}{\textrm}{m}$) was much finer than that of alumina body (13 ${\mu}{\textrm}{m}$). Fracture surface observations revealed mostly transgranular fracture for the coating, whereas intergranular fracture for the alumina body. Some pores (about 6%) were observed in the coating layer, although the alumina body showed fully dense microstructure.

• Journal of the Korean Ceramic Society
• /
• v.16 no.3
• /
• pp.155-163
• /
• 1979

This study was to explore the characteristics of 6 mole% CaO stabilized $ZrO_2$ prepared by wet chemical methods. The results of the experiments were as follows: 1. The powder calcined at 1000$^{\circ}$-110$0^{\circ}C$ was partly agglomerated. The morphology of agglomerate was spherical of 0.5-1$\mu{m}$ in size for Hot Petroleum Drying Method, chain-like of 1-2$\mu{m}$ for Freeze Drying Method, and irreqular of 2-3$\mu{m}$ for Coprecipitation Method. 2. Optimum calcining conditions for powder prepared by wet chemical methods were found: 110$0^{\circ}C$, 2h in air for Hot Petroleum Drying Method and Freeze Drying Method, and 100$0^{\circ}C$, 2h in air for Coprecipitation Method. 3. When specimen was calcined at 1000$^{\circ}$-110$0^{\circ}C$ in air for 2h and then sintered at 1$600^{\circ}C$ in air for 4h, the specimens prepared by wet chemical methods showed a high sintered density (94% of theoretical density) and a low open porosity (<0.8%); however, the sintered density of the specimen prepared by Oxide Wet Mixing Method was 90%. 4. The amount of cubic phase of sintered body prepared by wet chemical methods was observed to be higher than the one prepared by Oxide Wet Mixing Method. 5. It was found that Hot petroleum Drying Method, Freeze Drying Method and Coprecipitation Method were nearly the same in respect of the results of stabilization grade and sintered density of CaO-stabilized $ZrO_2$.

• Journal of Ocean Engineering and Technology
• /
• v.20 no.5 s.72
• /
• pp.77-81
• /
• 2006

In this study, monolithic liquid phase sintered SiC (LPS-SiC) was made by the hot pressing method with nano-SiC powder, whose particle size is 30 nm and less on the average. Alumina ($Al_{2}O_{3}$), yttria ($Y_{2}O_{3}$), and silica ($S_{i}O_{2}$) were used for sintering additives. To investigate the effects of $S_{i}O_{2}$, the $Al_{2}O_{3}/Y_{2}O_{3}$ composition was fixed and the ratio of $S_{i}O_{2}$ was changed, with seven different ratios tested. And to investigate the effects of the sintering temperature, the sintering temperature was changed, with $1760^{\circ}C,\;1780_{\circ}C$, and $1800_{\circ}C$ being used with a $S_{i}O_{2}$ ratio of 3 wt%. The materials were sintered for 1 hour at $1760^{\circ}C,\;1780^{\circ}C$ and $1800^{\circ}C$ under a pressure of 20 MPa. The effects on sintering from the sintering system used, as well as from the composition of the sintering additives, were investigated by density measurements. Mechanical properties, such as flexural strength, were investigated to ensure the optimum conditions for a matrix of SiCf/SiC composites. Sintered densityand the flexural strength of fabricated LPS-SiC increased with an increase in sintering temperature. Particularly, the relative density of a sintered body at $1800^{\circ}C$ with a non-content of $S_{i}O_{2}$, a specimen of AYSO-1800, was 95%. Also, flexural strength was about 750MPa.