• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.271-274
• /
• 2002

This paper is investigated construction of the Scramjet test facility and test method of Scramjet engine combustor model. Scramiet engine combustor model test was performed at Lab C-16BK CIAM (Central Institute of Aviation Motors) at Tyraevo in Moscow. The velocity of flow in the combustion chamber equal to Mach number 2.49 with single hole fuel spray nozzle injector and test duration equal to 7 seconds. Therefore In this paper is showed high altitude test method of Scramjet combustor model and the proper structure of combustor with single hole fuel spray nozzle.

• International Journal of Precision Engineering and Manufacturing
• /
• 제7권4호
• /
• pp.18-22
• /
• 2006

Although many efforts have been made in making nanometer-sized holes, there is still a major challenge in fabricating individual single-digit nanometer holes in a more controllable way for different materials, size distribution and hole shapes. In this paper we describe our efforts to use a top down approach in nanofabrication method to make single-digit nanoholes. There are three major steps towards the fabrication of a single-digit nanohole. 1) Preparing the freestanding thin film by epitaxial deposition and electrochemical etching. 2) Making sub-micro holes ($0.2{\mu}\;to\;0.02{\mu}$) by focused ion beam (FIB), electron beam (EB), atomic force microscope (AFM), and others methods. 3) Reducing the hole size to less than 10 nm by epitaxial deposition, FIB or EB induced deposition and micro coating. Preliminary work has been done on thin films (30 nm in thickness) preparation, sub-micron hole fabrication, and E-beam induced deposition. The results are very promising.

• Journal of Trauma and Injury
• /
• 제33권2호
• /
• pp.81-87
• /
• 2020

Purpose: Chronic subdural hematoma (CSDH) is a common disease in elderly patients and is usually treated by burr-hole drainage. However, the optimal surgical technique for treating CSDH has not been determined. In this study, we analyzed outcomes and recurrence rates after burr-hole drainage with or without irrigation in patients with CSDH. Methods: Eighty-two CSDH patients treated with burr-hole drainage at Wonju Severance Christian Hospital from March 2015 to June 2016 were enrolled in this study. The subjects were divided into three groups based on the surgical technique performed as follows: single burr-hole drainage without irrigation (group A, n=47), single burr-hole drainage with irrigation (group B, n=14), or double burr-hole drainage with irrigation (group C, n=21). These three groups were compared with respect to clinical and radiological factors and the recurrence rate, and independent factors predicting recurrence were sought. Results: After burr-hole drainage, CSDH recurred in 15 (18.3%) of the 82 patients, and six patients (7.3%) required reoperation. More specifically, recurrence was observed in 12 patients (25.5%) in group A, one (7.1%) in group B, and two (9.5%) in group C. The number of burr-holes did not significantly affect recurrence (odds ratio [OR]=0.38; 95% confidence interval [CI]: 0.60-2.38), but irrigation had a significant effect (OR=0.20; 95% CI: 0.04-0.97). Conclusions: This study shows that irrigation during burr-hole surgery in CSDH patients significantly reduced the risk of recurrence, regardless of the number of burr-holes used. We therefore recommend the use of active irrigation during burr-hole drainage surgery in CSDH patients.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1813-1818
• /
• 2006

We demonstrate a new approach to form gradient hole injection layer (HIL) in organic light-emitting diodes (OLEDs). Single spincoating of hole-injecting conducting polymer compositions with a perfluorinated ionomer results in gradient workfunction through the layer by self-organization, which lead to remarkably efficient single layer polymer light-emitting diodes (PLEDs) (${\sim}21$ cd/A). The device lifetime was significantly improved (${\sim50$ times) compared with the conventional hole injection layer, poly(3,4-ethylenedioxy-thiophene)/polystyrene sulfonate. This solution processed HIL also produced dramatically enhanced luminous efficiency (${\sim}34$ cd/A) in vacuum- deposited green fluorescent OLEDs while the vacuum deposited HIL gave the luminous efficiency of ${\sim}23$ cd/A in the same device structure.

• 천문학회보
• /
• 제36권1호
• /
• pp.49.1-49.1
• /
• 2011

Utilizing single-epoch spectra and the empirical relation between the size of the broad-line region and AGN continuum luminosity, the so-called single-epoch method has been widely used for estimating AGN black hole masses. However, the systematic uncertainties and the potential biases of this method are not well examined. Taking the full advantage of the high-quality homogeneous spectra from the Lick AGN Monitoring Project (LAMP), we investigate in detail the uncertainties of single-epoch mass estimates by comparing with the reverberation-mapping results. We find that the uncertainty due to AGN variability is less than 0.1 dex, while there is a systematic offset between single-epoch masses and reverberation masses. Particularly, narrow-line Seyfert 1 galaxies show that the Hbeta line widths measured from single-epoch (or mean) spectra are systematically larger than those from rms spectra, indicating a potential bias of single-epoch masses. We will present the detailed measurement method, the test of virial assumption, and the systematic uncertainties.

• 한국분무공학회지
• /
• 제14권1호
• /
• pp.8-14
• /
• 2009

This paper present the diesel fuel spray evolution and atomization performance in a multi-hole nozzle in terms of injection rate, spray evolutions, and mean diameter and velocity of droplets in a compression ignition engine. In order to study the effect of split injection on the diesel fuel spray and atomization characteristic in a multi-hole nozzle, the test nozzle that has two-row small orifice with 0.2 mm interval was used. The time based fuel injection rate characteristics was analyzed from the pressure variation generated in a measuring tube. The spray characteristics of a multi-hole nozzle were visualized and measured by spray visualization system and phase Doppler particle analyzer (PDPA) system. It was revealed that the total injected fuel quantities of split injection are smaller than those of single injection condition. In case of injection rate characteristics, the split injection is a little lower than single injection and the peak value of second injection rate is lower than single injection. The spray velocity of split injection is also lower because of short energizing duration and small injection mass. It can not observe the improvement of droplet atomization due to the split injection, however, it enhances the droplet distributions at the early stage of fuel injection.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.145-145
• /
• 2011

Recently, multi-hole electrode RF capacitively coupled plasma discharge is being used in the deposition of microcrystalline silicon for thin film solar cell to increase the speed of deposition. To make efficient multi-hole electrode RF capacitively coupled plasma discharge, the hole diameter is to be designed concerning the plasma parameters. In past studies, the relationship between plasma parameters such as pressures and gas species, and hole diameter for efficient plasma density enhancement is experimentally shown. In the presentation, the relationship between plasma deriving frequency and hole diameter for efficient multi-hole electrode RF capacitively coupled plasma discharge is shown. In usual capacitively coupled plasma discharge, plasma parameter, such as plasma density, plasma impedence and plasma temperature, change as frequency increases. Because of the change, the optimum hole diameter of the multi-hole electrode RF capacitively coupled plasma for high density plasma is thought to be modified when the plasma deriving frequency changes. To see the frequency effect on the multi-hole RF capacitively coupled plasma is discharged and one of its electrode is changed from a plane electrode to a variety of multi-hole electrodes with different hole diameters. The discharge is derived by RF power source with various frequency and the plasma parameter is measured with RF compensated single Langmuir probe. The shrinkage of the hole diameter for efficient discharge is observed as the plasma deriving frequency increases.

• 화약ㆍ발파
• /
• 제41권4호
• /
• pp.29-40
• /
• 2023

암반발파는 광업, 터널공사, 지하 구조물 구축 등 다양한 분야에서 활용되고 있으며, 특히 지하공간의 활용이 증가하면서 암반발파 기술이 더 중요한 역할을 하고 있다. 암반발파 시 발파공에서 발생하는 발파공의 압력은 파쇄도, 발파진동 등에 직접적인 영향을 미치는 변수이며, 폭약의 성능 평가 및 발파 결과 예측에 있어서 가장 중요한 매개변수 중 하나이다. 이와 같은 발파공 압력은 몇몇 연구자들에 의해 연구가 수행된 바가 있지만, 폭약의 종류, 폭약량, 발파조건 등 실험조건으로 인하여 비교가 어려운 실정이다. 본 연구에서는 발파공 압력센서와 관측공 압력센서를 제작하여 단일공 발파 시 발파공과 관측공의 압력을 측정하였다. 실험결과를 바탕으로 발파공 주변 압력 전파특성과 발파진동 전파특성에 대해 고찰하였다.

• 센서학회지
• /
• 제32권5호
• /
• pp.328-333
• /
• 2023

This study experimentally verified the etch rate of the SiO₂ sacrificial layer etching process with a single etch hole using vapor-phase hydrogen fluoride (VHF) etching. To fabricate small-sized polysilicon etch holes, both circular and triangular pattern masks were employed. Etch holes were fabricated in the polysilicon thin film on the SiO₂ sacrificial layer, and VHF etching was performed to release the polysilicon thin film. The lateral etch rate was measured for varying etch hole sizes and sacrificial layer thicknesses. Based on the measured results, we obtained an approximate equation for the etch rate as a function of the etch hole size and sacrificial layer thickness. The etch rates obtained in this study can be utilized to minimize structural damage caused by incomplete or excessive etching in sacrificial layer processes. In addition, the results of this study provide insights for optimizing sacrificial layer etching and properly designing the size and spacing of the etch holes. In the future, further research will be conducted to explore the formation of structures using chemical vapor deposition (CVD) processes to simultaneously seal etch hole and prevent adhesion owing to polysilicon film vibration.

• Structural Engineering and Mechanics
• /
• 제56권6호
• /
• pp.983-1001
• /
• 2015

This study focuses on the load carrying capacity and the force transfer mechanism of multi-hole perfobond shear connectors in steel-concrete composite structure. The behavior of multi-hole perfobond shear connector is more complicated than single-hole connector cases. 2 groups push-out tests were conducted. Based on the test results, behavior of the connection was analyzed and the failure mechanism was identified. Simplified iterative method and analytic solution were proposed based on force equilibrium for analyzing multi-hole perfobond shear connector performance. Finally, the sensitivity of design parameters of multi-hole perfobond shear connector was investigated. The results of this research showed that shear force distribution curve of multi-hole perfobond shear connector is near catenary. Shear forces distribution were determined by stiffness ratio of steel to concrete member, stiffness ratio of shear connector to steel member, and number of row. Efficiency coefficient was proposed to should be taking into account in different limit state.