Acknowledgement
이 논문은 정부(과학기술정보통신부)의 재원으로 한국연구재단의 지원을 받아 수행된 연구임(No. 2021R1F1A1064046). 샘플 제작 과정에 도움을 준 영남대학교 미래자동차공학과 최주헌 군에게 감사를 전합니다.
References
- S. Shubham, Y. Seo, V. Naderyan, X. Song, A. J. Frank, J. T. M. G. Johnson, M. da Silva, and M. Pedersen, "A Novel MEMS Capacitive Microphone with Semiconstrained Diaphragm Supported with Center and Peripheral Backplate Protrusions," Micromachines, Vol. 13, No. 1, p. 22(1)-22(23), 2021. https://doi.org/10.3390/mi13010001
- J. Varona, M. Tecpoyotl-Torres, and A. Hamoui, "Design of MEMS vertical-horizontal chevron thermal actuators", Sens. Actuators A Phys., Vol. 153, No. 1, pp. 127-130, 2009. https://doi.org/10.1016/j.sna.2009.04.027
- Y. Qiu, J. V. Gigliotti, M. Wallace, F. Griggio, C. E. M. Demore, S. Cochran, and S. Trolier-McKinstry, "Piezoelectric micromachined ultrasound transducer (PMUT) arrays for integrated sensing, actuation and imaging", Sens., Vol. 15, No. 4, pp. 8020-8041, 2015. https://doi.org/10.3390/s150408020
- N. Moldovan, K. H. Kim, and H. D. Espinosa, "Design and Fabrication of a Novel Microfluidic Nanoprobe", J. Microelectromech. Syst., Vol. 15, No. 1, pp. 204-213, 2006. https://doi.org/10.1109/JMEMS.2005.863701
- J. A. Walker, K. J. Gabriel, and M. Mehregany, "Mechanical integrity of polysilicon films exposed to hydrofluoric acid solutions", Proc. of IEEE Proceedings on Micro Electro Mech. Syst., An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots., pp. 56-60, Napa Valley, USA, 1990.
- W. I. Jang, C. A. Choi, M. L. Lee, C. H. Jun, and Y. T. Kim, "Fabrication of MEMS devices by using anhydrous HF gas-phase etching with alcoholic vapor", J. Micromech. Microeng., Vol. 12, No. 3, pp. 297-306, 2002. https://doi.org/10.1088/0960-1317/12/3/316
- D. J. Monk, D. S. Soane, and R. T. Howe, "Hydrofluoric Acid Etching of Silicon Dioxide Sacrificial Layers: I. Experimental Observations", J. Electrochem. Soc., Vol. 141, No. 1, p. 264, 1994.
- F. Xianwen, M. Nosang, K. Nobe, and J. W. Judy, "Modeling the effect of etch holes on ferromagnetic MEMS", IEEE Trans. Magn., Vol. 37, No. 4, pp. 2637-2639, 2001. https://doi.org/10.1109/20.951259
- V. L. Rabinovich, R. K. Gupta, and S. D. Senturia, "The effect of release-etch holes on the electromechanical behaviour of MEMS structures", Proc. of International Solid State Sensors and Actuators Conference (Transducers '97), pp. 1125-1128, Chicago, USA, 1997.
- D. J. Monk, D. S. Soane, and R. T. Howe, "Hydrofluoric Acid Etching of Silicon Dioxide Sacrificial Layers: II. Modeling", J. Electrochem. Soc., Vol. 141, No. 1, p. 270, 1994.
- J. Zhang, Y. Wu, G. Yang, D. Chen, J. Zhang, H. You, C. Zhang, and Y. Hao, "Optimization of Sacrificial Layer Etching in Single-Crystal Silicon Nano-Films Transfer Printing for Heterogeneous Integration Application", Nanomater., Vol. 11, No. 11, pp. 3085(1)-3085(12), 2021.
- L. Louriki, P. Staffeld, A. Kaelberer, and T. Otto, "Silicon Sacrificial Layer Technology for the Production of 3D MEMS (EPyC Process)", Proc. of Eurosensors 2017 Conference, pp. 295(1)-295(5), Paris, France, 2017.
- https://www.idonus.com/index.php?path=products&category=VPE (retrieved on Sep. 4, 2023).
- J. Buhler, F. P. Steiner, and H. Baltes, "Silicon dioxide sacrificial layer etching in surface micromachining", J. Micromech. Microeng., Vol. 7, No. 1, p. R1, 1997.
- A. Witvrouw, B. Du Bois, P. De Moor, A. Verbist, C. A. Van Hoof, H. Bender, and C. Baert, "Comparison between wet HF etching and vapor HF etching for sacrificial oxide removal", SPIE, Vol. 4174, pp. 130-141, 2000.
- Y. I. Lee, K. H. Park, J. Lee, C. S. Lee, H. J. Yoo, C. J. Kim, and Y. S. Yoon, "Dry release for surface micromachining with HF vapor-phase etching", J. Microelectromech. Syst., Vol. 6, No. 3, pp. 226-233, 1997. https://doi.org/10.1109/84.623111