• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.5
• /
• pp.1352-1363
• /
• 2015

This study was carried out to investigate the characteristics of the dependent variables depending on the condition changes of independent variable of the operation and the material during the production of collets added with rice and dried shrimp by using single extruder to utilize as basic data for the manufacture of extrusion collets. A total of 7 independent variables were set up as a raw, 20, 40 and 60 mesh for the powder particle size of rice; 12, 14, 16 and 18% for the moisture content of rice; 2, 4, 6 and 8% for the addition amount of dried shrimp; 90, 95, 100 and $110^{\circ}C$ for the barrel temperature; 210, 280 and 340 rpm for the screw speed; 4, 6, 8 and 10 mm for the discharge port diameter; 30, 40, 50 and 60 kg/h for the input amount of the mixed material. The characteristics of the dependent variables including puffing ratio, moisture content, lightness, uniformity, productivity of collets was to be studied by changing the conditions of the independent variables. As a results of this study, 20 mesh of powder particle size of rice, 14% of moisture content of rice, 4% of addition amount of dried shrimp, $100^{\circ}C$ of barrel temperature, 280 rpm of screw speed, 6 mm of discharge port diameter and 50 kg/h of input amount of mixed material were found to be the most preferable over other independent variables for the production of extrusion collets. In conclusion, it is necessary to set the independent variable in order to produce the high quality collets added with the rice as the main raw material and dried shrimp as the sub-materials.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.29 no.3
• /
• pp.412-419
• /
• 2000

본 연구는 오징어, 쌀가루 및 탈지콩가루를 혼합하여, 압출성형 공정을 이용하여, 새로운 스낵제품을 만들고자 수행하였다. 실험실용 single-screw extruder를 이용하여 제품의 낮은 전단력과 높은 팽화율을 목적으로 수 차례 실험한 결과, 15.7%의 혼합물수분과 16$0^{\circ}C$의 조리 오도가 비교적 좋은 제품 생산조건으로 나타났다. 이 조건에서 냉동 건조 오징어가루나 아주 곱게 갈은 생 오징어를 다른 재료들과 혼합하여 최종 제품들을 만들었다. 전단력은 두 오징어 첨가제품간에 유의성 있는 차이는 없었으나, 팽화율의 경우는 생 오징어를 첨가하여 만든 제품이 냉동 건조시킨 오징어를 첨가하여 만든 제품에 비해 유의적으로 높았다. 소비자 관능검사 결과 생 오징어로 만든 제품이 냉동 건조시킨 오징어로 만든 제품에 비해 유의적으로 높았다. 소비자 관능검사 결과 생 오징어로 만든 제품이 냉동 건조시킨 오징어로 만든 제품에 비해 외관, 맛, 향, 그리고 전체적 면에서 선호도가 높았다. 결론적으로 본 연구는 단백질이 풍부한 오징어와 탈지 코가루를 쌀가루에 첨가하여 비교적 팽창이 잘된 스낵제품을 생산할 수 있는 조건을 제시하였으며, 이 결과는 차후 제품개발의 기반으로 사용할 수 있을 것이라고 본다.

• Proceedings of the Korean Society for Food Science of Animal Resources Conference
• /
• 1997.06a
• /
• pp.19-39
• /
• 1997

Extrusion conditions were optimized for blends of ground lamb and starch using a single-screw extruder for the purpose of producing expanded snack-type products. A central composite rotatable response surface methodology(RSM) design was used with variation in feed moisture, process temperature, and screw speed. The three variables significantly affected one or more of the measured physical properties of extrudates. The optimum conditions for minimum shear force values were 26.5% feed moisture, $148^{\circ}C$ process temperature, and 134 rpm screw speed. Lean ground beef, chicken, goat, lamb or mutton was blended with corn starch, and extruded at the optimum condition established from RSM experiments. Physical/rheological properties were generally similar, water activity was low (<0.12) and total aerobic plate counts were <10 for all products. Extrudates containing chicken had the highest ratio of polyunsaturated fatty acids to saturated fatty acids, whereas those containing beef had the highest ratio of monounsaturated fatty acids to saturated fatty acids. Sensory data indicated that texture was acceptable and flavor characteristics were not different among the products.

• Applied Chemistry for Engineering
• /
• v.10 no.7
• /
• pp.1008-1013
• /
• 1999

Mechanical properties and morphology of pectin/starch blend films depending upon the composition and plasticizer ratio were studied. Blends were prepared continuously in a twin-screw extruder. Films were prepared using a single-screw extruder with slit die. Most of the blends showed a good thermoplastic behavior, while the blends with very high ratio of pectin/starch had a poor thermoplasticity. Tensile properties of blend films were changed significantly by the amount of glycerol and relatively little by the ratio of pectin/starch. Differential scanning calorimetry(DSC) curves of wet blends showed a transition similar to glass transition temperature(Tg) at about $125^{\circ}C$. It was found by Scanning electron microscopy(SEM) study that there exists a good interfacial adhesion between pectin and starch.

• The Korean Journal of Rheology
• /
• v.8 no.1
• /
• pp.11-29
• /
• 1996

스크류 채널 내에 주기적을 배리어를 설치함으로써 단축 스크류 압출 공정에서의 혼합 성능이 높여질수 있음이 S.J. Kim과 T.H. Kwom에 의해 밝혀진 바있다. 그들은 이새 로운 스크류를 통한 혼합이 카오틱하는 점으로부터 이 새로운 스크류를 카오스 스크류라고 명명했다. 우리는 카오스 스크류가 장착된 단축 압출공정에서 역학계 이론과 혼합운동학을 연계하여 연구를 수행하였다. 포인카레 단면을 통한 연구로부터 우리는 배리어의 배열이 islan의 크기에 대단히 밀접하게 관련되어 있음을 발견하였다. 연속적인 쉘 변형은 카오틱 유동에서 유체 요소를 지수 함수 형태로 늘이는 늘임과 접힘으로 이루어진 카오틱 혼합 메 카니즘을보여준다. 유체요소의 국부 늘임은 원리상으로는 계산되어질수 있으나 수치 해석상 의 어려운 점이 있다. 정규 유동에서와 달리 카오틱 유동에서는 입자 추적이 Runge-Kutta 적분중의 시간간격에 대단히 민감하다. 그래서 실제 사용될수 있는 시간 간격에 의해 계산 된 국부 늘임율 및 혼합효율의 정확도가 보장되어지지 않는다. 이러한 점들을 고려하여 우 리는 새로운 혼합 척도로 $\sigma$z를 제안하는데 이값은 비교적 긴 유체선분이 채널방향을 따라 늘어나는 비에 관련된 값이다. 배리어 영역의 길이가 짧을수록 $\sigma$z는 큰값으로 나타나지만 포인카레 단면에 의한 연구에 따르면 배리어의 주기가 너무 짧다면 두 개의 거대한 island 가 존재하는 것으로 밝혀졌다. 그리고 이러한 사실은 유체요소의 늘임비가 크다는 것이 항 상 좋은 혼합성능을 뜻하는 것은 아니라는 점을 보여준다. 이러한 관점에서 볼 때 혼합 스 크류를 설계하는데 있어서는 포인카레 단면을 병행하여 ${\sigma}_z$의 값을 사용하는 것이 바람직할 것이다.

• Preventive Nutrition and Food Science
• /
• v.6 no.3
• /
• pp.163-169
• /
• 2001

To produce expanded, minimally hard extrudates from blends of raw pork meat (20%), defatted soy flour (25%), and corn starch using a single-screw extruder, various combinations of feed moisture, process temperature, and screw speed were evaluated. First series of extrusion runs were conducted according to a central composite rotatable design/response surface methodology (RSM). Upon assessing the full model for each response, insignificant terms were eliminated to determine final response surface models. Screw speed within the range evaluated was found to have no significant effect on expansion ratio (ER) or shear force (SF) of extrudates. Since examinations of the response surfaces and their generated grids of predicted values indicated that maximum ER and minimum SF were likely to be attained with a moisture-temperature combination outside the RSM experimental range, the second series of extrusion runs were conducted with several selected combinations of moisture and temperature to determine a practical optimum extrusion condition. The combination of 22.78% feed moisture, 16$0^{\circ}C$ process temperature, and 170 rpm screw speed was chosen as such a condition, and used in the final extrusion. The final product required less force to break than did commercial pretzel sticks.

• Journal of computational fluids engineering
• /
• v.9 no.4
• /
• pp.55-63
• /
• 2004

The three-dimensional Stokes flow within a staggered screw channel is obtained by using a finite volume method. The geometry is intended to mimic the single screw extruder having staggered arrangement of flights. The flow solution is then subjected to the analysis of the stirring performance. In the analysis of the stirring performance, the stretching-mapping method developed by the author is employed for calculating the materials' stretching exponents, which are to be used in quantification of the mixing effect. The numerical results Indicate that the staggered geometry gives indeed far much better stirring-performance than the standard (nonstaggered) flight geometry. It was also shown that care must be given to the selection of the basis planes for evaluating the local stretching rate, and it turns out that the best method (H-method) has its basis plane just on the half way between the past and future evolution of fluid particles subjected to the defromation. In evaluating the stretching exponent, the expansion ratio must be considered which is one of the characteristic differences of the actual three-dimensional flows from the two-dimensionmal counterparts. The larger axial pressure-difference causes in general the smaller stirring performance while the flow rate is increased. The smaller channel length also increases the stirring performance.

• KSBB Journal
• /
• v.27 no.3
• /
• pp.137-144
• /
• 2012

Among various pretreatment processes for bioethanol production, extrusion pretreatment, one of cheap and simple process was investigated to efficiently produce fermentable sugars from micro alga, Chlorella sp. The biomass was pretreated in a single screw extruder at five different barrel temperatures of 45, 50, 55, 60 and $65^{\circ}C$, respectively with five screw rotation speed of 10, 50, 100, 150 and 200 rpm. The pretreated biomass was reacted with two different hydrolyzing enzymes of cellulase and amyloglucosidase since the biomass contained different types of carbohydrates, compared to cellulose of agricultural by-products such wheat and corn stovers, etc. In general, higher glucose conversion yield was obtained as 13.24 (%, w/w) at $55^{\circ}C$ of barrel temperature and 100 rpm of screw speed conditions. In treating 5 FPU/glucan of cellulase and 150 Unit/mL of amyloglucosidase, ca. 64% of cellulose and 40% of polysaccharides in the micro alga were converted into glucose, which was higher yields than those from other reported data without applying an extrusion process. 84% of the fermentable sugars obtained from the hyrolyzing processes were fermented into ethanol in considering 50% of theoretical maximum fermentation yield of the yeast. These results implied that high speed extrusion could be suitable as a pretreatment process for the production of bioethanol from Chlorella sp.

• Korean Journal of Food Science and Technology
• /
• v.22 no.4
• /
• pp.451-455
• /
• 1990

The extrusion characteristics of pork rind mixed with corn flour were investigated. The blends of pork rind to corn flour in the ratio of 1 : 2, 1 : 1, 2 : 1 and 3 : 1(w/w) were made and each blend was dried up to 5, 10 and 15% moisture content. The blends were extruded by single screw extruder. The extrusion characteristics of each extrudate were as follow. The highest value of expansion ration was attained by mixing pork rind and corn flour in the ratio of 1 : 1, containing 5% moisture content. As the rind content to the corn flour mixture was increased, the bulk density, water absorption index, breaking stregth and redness, of the extradate increased, but the lightness and yellowness decreased. It was concluded that a high quality snack food could by produced by extrusion-cooking the mixture of pork rind and corn flour.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1668-1671
• /
• 2005

Vulcanized natural rubber was pulverized using a single screw extruder in a non-cryogenic Solid Shear Extrusion process where rubber granulates were subjected to high compressive and shear stresses. The producted particles had diameters ranging from 40 to 1200$\{mu}m$. A principle used in this paper was developed in Russia. The development method for producing a polymeric material powder consists in compressing said material by shearing the material during a pressure increase and cooling. Consecutive breakdown is carried out by shearing the material during the pressure decrease and cooling.