• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.04a
• /
• pp.74-78
• /
• 2003

Stress analysis was conducted with finite element method to study the stress distributions in both single-pin and multi-pin loaded composite laminates. The various parameters involved in the design of the joint method were considered. The stress distributions in the vicinity of the holes were predicted considering the effects of various parameters such as the lay-ups, number of pins, number of rows, row spacing, and hole patterns. The results show that the performance of joint is greatly affected by these parameters.

• Textile Coloration and Finishing
• /
• v.18 no.3 s.88
• /
• pp.49-58
• /
• 2006

The purpose of this study was to examine the effect of covering yarn's twist on mechanical properties of knitted fabrics of composite yarns with single covering process. Four yarns that were used in this study: two different composite yarns made from the four kinds of cotton and functional polyester-(Poly-A) with the ratio of 52:48, and the rest two yarns are the original cotton 100% yarn and the poly-A 100% yarn. The two kinds of composite yarns, CP1 and CP2, were processed on the single covering process. CP1 was applied on the single covering process with S-800 tpm, where Poly-A was used as covering yarn and cotton was used as core yarn. CP2 was applied on the same process as CP1 except that Poly-A had been applied on the two-for-one twisting process with S-400 tpm on the previous step. Sixteen mechanical properties of all the four knifed fabrics knitted under the same knitting conditions were measured by KES-FB system with the outer knit condition. And 3D CAD dressmaking simulations, which were driven by some of the mechanical properties, were presented. The results were as follows: CP2 had high RT values with twisting of covering yarn. CP2 also had high B, 2HB values because of higher linear density. SMD was affected rather by twisting of covering yarn than by fine hair of the cotton surface. Twisting of covering yarn made it decreasing T value and increasing W value. Dressmaking 3D CAD simulations showed that there are buckling effects on CP2 because of high bending rigidity and shear rigidity.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.18 no.1
• /
• pp.51-60
• /
• 2016

This study aims to contribute to development of women's incontinence panties with anti-aging effect meeting customers' requirements by examining types, sorts, sizes and specifications of women's incontinence panties currently sold in the market. The results of analysis of a total of 22 commercial products are as follows. 1. Among the samples, 21 incontinence panties were slip on type like regular underwear; only 1 was pad insertion type. With respect to the length of side seam, 17 (77.3%) incontinence panties were above 14 cm which is classified as maxi; the rest of them (5, 22.7%) were 7~11 cm which is classified as middy. 2. With respect to size, the percentage of Size 3 was 40.9% showing the largest, followed by Size 4 (31.8%), Size 2 (18.2%), Size 5 (9.1%). To produce the incontinence panties considering various ages and body shapes, it is recommended to select above Size 4 as a minimum. 3. With respect to materials of the incontinence panties, natural fibers such as cotton or rayon were mostly used and a polyurethane, nylon or polyester was mixed to enhance the wearing sensation and stretchability of the panties. Finally, for structure of the crotch area, single knit was the largest (9, 40.9%), terry weave 7 (31.8%), sofe pile weave 4 (18.2%), and waffle weave or diamond weave 2.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.19 no.3
• /
• pp.63-74
• /
• 2017

This study aims to contribute to the development of male incontinence underwear with an anti-aging effect that meets customer requirements by examining the types, sorts, sizes and specifications of male incontinence underwear currently sold on the market. The results of an analysis of a total of eight commercial products are as follows. 1) Among the samples, six types of incontinence underwear were of a pull-on style like regular underwear; two types were of a pad insertion style. With respect to the underwear design, four (50%) types of incontinence underwear were brief style. The rest were drawers (3, 37.5%). Only one was of a trunk (12.5%) style. 2) With respect to size, the percentage of Size 3 was 50%, followed by Size 4 (50%). Most of the size of the underwear uses hip measurement whereas Japanese products (3, 37.5 %) use waist circumference. 3) With respect to the materials of the incontinence underwear, natural fibers such as cotton were mostly used and a polyurethane or polyester was mixed to enhance the wearing sensation and stretchability of the underwear. Finally, for the structure of the pad area, a napping finish was the largest (3, 37.5%), single knit 2(25%), twill weave 2(25%), and rib weave 1.

• The Research Journal of the Costume Culture
• /
• v.26 no.3
• /
• pp.390-408
• /
• 2018

The number of hand knitters has increased dramatically in the past few years. Recently, various hand knitted items have been seen in many fashion collections. The main purpose of this study is to analyze the design features of hand knitted items in the collections from Daniela Gregis. This brand was selected because it featured knitted items in its collections every season. An empirical analysis about form, material, color and knitting technique was done for hand knitted items from Daniela Gregis' collections from 2012 S/S to 2018 S/S. The results can be summarized as follows: In terms of form, garments such as pullovers, cardigans, and shawls used basic components, and accessories such as bags, mufflers, hats, and decorative pieces had various shapes. In the material, there were many items that expressed unique textures by combining various materials such as a mix of fabric and yarn. With regards to color, orange, yellow, and red were mainly used as accent colors, and combinations of two or more colors were prominent in the items. In terms of knitting technique, the methods used in the collections were mostly simple and basic. Among various techniques, plain knitting, garter knitting, and single crochet methods were mainly used. While this study is limited to the characteristics of hand knitted items from a single brand, therefore cannot be generalized for all knit fashion, the study provides basic data that could facilitate the revitalization of the hand knitting industry and expand the application range of hand knitting techniques.

• Textile Coloration and Finishing
• /
• v.18 no.1
• /
• pp.33-43
• /
• 2006

The purpose of this study was to eximine the effect of different yam twisting methods on mechanical properties and 3D CAD images of plain knitted fabrics made of composite yarns. Six yams were used in this study: four different composite yams of the six consist of acetate and functional polyester (Poly-m) with the ratio of 70:30, and the rest two are the original acetate $100\%$ yam and the poly-m $100\%$ yarn. The four kinds of composite yarns were processed in combinations of twisting processes such as interlacing, false twisting, two for one twisting, combined twisting and single covering, and the two original yams were knitted without any twisting process. Sixteen mechanical properties of all the six knitted fabrics, knitted under the same knitting conditions, were measured by KES-FB system with the outer knit condition. The results were as follows; 1) When the sample applied with the false twisting process at the temperature as high as $220^{\circ}C$, ENT, B, HB, G and RC values of samples increased which leads to increasing dimensional stability. 2) To gain the high bending and shear properties in the single covering process, selecting the core yarn with such properties is the most important factor. 3) Interlacing process effected to increase RC value. 4) False twisting process after interlacing process gave bulkiness and un-interlaced part in yam was increased SMD value. The SMD value of the kilted fabric of the composite yarn, which was put through the combined twist process, was higher than those of which simple process such as the two for one twist or the single covering process applied. In order to achieve the silk-like surface feel of knitted fabric, the sin91e covering process is recommended. 5) Examining the simulation images of the knifed fabrics of composite yarn, which were generated by the 3D CAD system based on the mechanical properties of the fabric, led that appearance could be changed as different twisting methods were applied.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.2 s.161
• /
• pp.189-196
• /
• 2007

The purpose of this study was to find out the purchasing practices and consumer's needs for pet dog apparel to provide useful information for the manufacture of pet dog's apparel. Data were obtained from 203 consumers who have purchased dog apparel(55 male, 148 female). 57.9% of them were 20-30 years old, 27.9% were living in houses, 54.3% were apartment residents. The kinds of dog included were Shihtzu, Martise, and Yorkshireterrier, and 2/3 of the respondents own a single dog, the remainder have at least two dogs. The most important factor to consider when purchasing dog apparel was size, followed by comfort, design, and materials in that order, Most of the apparel was purchased with convenience as the primary consideration, and the average price was 10-30 thousands won, and the items were purchased at pet beauty shops or specialty shops. For materials, it showed that the majority preferred cotton or a cotton mixture which was woven or woven with knit. The survey revealed that the main purposes for the apparel were, in order, to protect the dog from cold weather and direct sunlight, to be good looks and to memorialize a special day. Consumers put the apparel on their dogs 1-3 times per week, on average, and also when they went out for a walk. They were satisfied with the design, color and quality of the material now on the market, but unsatisfied with size and price. They have a preference for cute, but simple designs and a functional style. The respondents wanted to have material that was mild or neutral, stain-resistant, and something that would repel insects.

• Textile Coloration and Finishing
• /
• v.22 no.3
• /
• pp.282-291
• /
• 2010

Digital textile printing(DTP) is becoming more important because the production trend of textile printing goods is adapting to small-lot multiple items. Recently enhanced use of DTP is closely connected with production of high value-added products in fashion industry, which is also appropriate for quick response system(QRS). Quality of DTP depends on pre-treatment, after-treatment, ink, media, printer, etc. One of these parameters, Selection of good media is very important to obtain high quality of DTP products. Especially, the effects of media on printing quality of DTP according to yarn twist and structure of knitting fabric were examined in this study. Two types of yarn twist of 830 t.p.m and 1630 t.p.m for cotton knit were used and five types of media structures were knitted with single circular knitting machine. First, MIU, MMD, SMD's values are closely related with surface roughness of sample as well as printing quality. The hard twist samples were higher values than normal twist samples in the same media structure. In case of SMD, the values increased from plain to corduroy types. Second, aspect of line sharpness, line area, and line width values of hard twist samples decreased from plain to corduroy than those of normal twist samples. Third, line deviation values of hard twist samples, blurriness of line, also decreased than those of normal twist samples.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.4
• /
• pp.727-737
• /
• 2023

This study aimed to provide basic data for the design and R&D of golf wear intended for 64 people in their 40s, 50s, and 60s by identifying the needs for golfers through a survey of golf wear purchasing conditions and preferences. The findings shows that purchases are made at permanent discount stores, and information about products are discovered through TV and Internet advertisements. Golf wear is purchased once or twice a year, with annual expenditures ranging from KRW 500,000 to less than 1 million, with single purchases ranging from KRW 200,000 to less than 500,000. When purchasing golf wear, design was considered first, with women preferring white garment, while men preferred black and gray ones. Men tended to prefer a PK collar button fastening style, while women preferred a knit style with a round neckline. Women preferred semi-fitted and fitted styles, while men preferred semi-fitted and loose-fitting styles, showing significant differences. When considering the production of golf wear, the younger the age of the consumer, the more the results indicated that the design needed to look younger, so it is the necessary to design golf wear that reflects the functional need of golfer while prioritizing designs for various ages.