• Korean Journal of Materials Research
• /
• v.30 no.2
• /
• pp.61-67
• /
• 2020

BiFeO₃ with perovskite structure is a well-known material that has both ferroelectric and antiferromagnetic properties called multiferroics. However, leaky electrical properties and difficulty of controlling stoichiometry due to Bi volatility and difficulty of obtaining high relative density due to high dependency on the ceramic process are issues for BiFeO₃ applications. In this work we investigated the sintering behavior of samples with different stoichiometries and sintering conditions. To understand the optimum sintering conditions, nonstoichiometric Bi_1±xFeO_3±δ ceramics and Ti-doped Bi_1.03Fe_1-4x/3Ti_xO₃ ceramics were synthesized by a conventional solid-state route. Dense single phase BiFeO₃ ceramics were successfully fabricated using a two-step sintering and quenching process. The effects of Bi volatility on microstructure were determined by Bi-excess and Ti doping. Bi-excess increased grain size, and Ti doping increased sintering temperature and decreased grain size. It should be noted that Ti-doping suppressed Bi volatility and stabilized the BiFeO₃ phase.

• Journal of Powder Materials
• /
• v.18 no.5
• /
• pp.449-455
• /
• 2011

In this study, p-type $(AgSbTe_2)_{15}(GeTe)_{85}$: TAGS-85 compound powders were prepared by gas atomization process, and then their microstructures and mechanical properties were investigated. The fabricated powders were of spherical shape, had clean surface, and illustrated fine microstructure and homogeneous $AgSbTe_2$ + GeTe solid solution. Powder X-ray diffraction results revealed that the crystal structure of the TAGS-85 sample was single rhombohedral GeTe phase, which with a space group $R_{3m}$. The grain size of the powder particles increased while the micro Vickers hardness decreased with increasing annealing temperature within the range of 573 K and 723 K due to grain growth and loss of Te. In addition, the crystal structure of the powder went through a phase transformation from rhombohedral ($R_{3m}$) at low-temperature to cubic ($F_{m-3m}$) at high-temperature with increasing annealing temperature. The micro Vickers hardness of the as-atomized powder was around 165 Hv, while it decreased gradually to 130 Hv after annealing at 673K, which is still higher than most other fabrication processes.

• Geosciences Journal
• /
• v.22 no.6
• /
• pp.939-953
• /
• 2018

We examined the microfabrics of omphacite and garnet in foliated eclogite to determine the influence of the layered structure on seismic observations in subduction zone. The analyzed eclogite, from the Lanterman Range, northern Victoria Land, Antarctica, is characterized by layering in which the modal abundances of garnet and omphacite vary. For garnet, the low aspect ratios, similar angular distribution of long axes relative to the foliation in both layers, uniform grain size distribution, near-random crystallographic preferred orientations (CPOs), and misorientation angle distributions are indicative of passive behavior during deformation. In contrast, omphacite shows relatively high aspect ratios, a low angle between the long axes of crystals and the foliation, a wide grain-size distribution, and distinctive CPOs, suggesting dislocation creep as the main deformation mechanism. The results of fabric analyses are consistent with strain localization into omphacite or omphacite-rich layers rather than garnet or garnet-rich layers. The single-crystal seismic anisotropy of garnet is very weak ($AV_P=0.2%$, $AV_S=0.5-0.6%$), whereas that of omphacite is much stronger ($AV_P=3.7-5.9%$ and $AV_S=2.9-3.8%$). Seismic anisotropy of the omphacite-rich layers shows an increase of 329% for $AV_P$ and 146% for $AV_S$ relative to the garnet-rich layers. Our results demonstrate the importance of the layered structure in strain localization and in the development of the seismic anisotropies of subducting oceanic crust.

• Journal of the Korean Physical Society
• /
• v.73 no.11
• /
• pp.1703-1707
• /
• 2018

Ferromagnetic ${\tau}-phase$ $Mn_{54}Al_{46}C_{2.44}$ particles were synthesized, and its composites with commercial $Sm_2Fe_{17}N_3$ and synthesized $Fe_{65}Co_{35}$ powders were fabricated. Smaller grain size than the single domain size of the $Mn_{54}Al_{46}C_{2.44}$ without obvious grain boundaries and secondary phases is the origin for the low intrinsic coercivity. It was confirmed that the magnetic properties of the $Mn_{54}Al_{46}C_{2.44}$ can be enhanced by magnetic exchange coupling with the hard magnetic $Sm_2Fe_{17}N_3$ and soft magnetic $Fe_{65}Co_{35}$. The high degrees of the exchange coupling were verified by calculating first derivative curves. Thermo-magnetic stabilities of the composites from 100 to 400 K were measured and compared. It was demonstrated that the $Mn_{54}Al_{46}C_{2.44}$ based composites containing $Sm_2Fe_{17}N_3$ and $Fe_{65}Co_{35}$ could be promising candidates for future permanent magnetic materials with the proper control of purity, magnetic properties, etc.

• Korean Journal of Metals and Materials
• /
• v.46 no.12
• /
• pp.788-799
• /
• 2008

This study is concerned with the effects of Mo, Cr, and V addition on tensile and Charpy impact properties of API X80 linepipe steels. Four kinds of steels were processed by varying Mo, Cr, and V additions, and their microstructures and tensile and Charpy impact properties were investigated. Since the addition of Mo and V promoted to form fine acicular ferrite and granular bainite, while prohibiting the coarsening of granular bainite, it increased the strength and upper shelf energy, and decreased the energy transition temperature. The Cr addition promoted the formation of coarse granular bainite and secondary phases such as martensite-austenite constituents, thereby leading to the increased effective grain size, energy transition temperature, and strength and to the decreased upper shelf energy. The steel containing 0.3wt.% Mo and 0.06wt.% V without Cr had the highest upper shelf energy and the lowest energy transition temperature because its microstructure was composed of fine acicular ferrite and granular bainite, together with a small amount of hard secondary phases, while its tensile properties maintained excellent.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.3
• /
• pp.214-225
• /
• 2023

Piezoelectric actuators, which utilize piezoelectric crystals or ceramics, are commonly used in precision positioning applications, offering high-speed response and precise control. However, the use of low-performance ceramics and expensive single crystals is limiting their versatile use in the actuator market, necessitating the development of both high-performance and cost-effective piezoelectric materials capable of delivering higher forces and displacements. The use of textured Pb (lead)-based piezoelectric ceramics formed by so-called templated grain growth method has been identified as a promising strategy to address the performance and cost issue. This review article provides insights into recent advances in texturing Pb-based piezoelectric ceramics for improved performance in actuation applications. We discussed the relevant issues in detail focusing on current challenges and emerging trends in the textured piezoelectric ceramics for their reliability and performance in actuator applications. We discussed in detail focusing on current challenges and emerging trends of textured piezoelectric ceramics for their reliability and performance in actuator applications. In conclusion, the article provides an outlook on the future direction of textured piezoelectric ceramics in actuator applications, highlighting the potential for further success in this field.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.3 no.2
• /
• pp.107-116
• /
• 1993

Tungsten thin film was deposited on Si( 100) substrate by either Si substrate reduction of W$F_6$( case 1) or Si$H_4$ reduction of W$F_6$( case 2) in LPCVD system The morphology and properties of deposited films for both cases were examined. The crystal structure for both cases was determined to be bec (body centered cubic). The amount of tungsten and the grain size in thin films were increased as the film grows. From the experimental results and theoretical considerations, it can be understood that the tungsten thin film grows by the volmer-weber growth mode, that is, island growth. The detailed tungsten thin film growth mode is presented. It was also found that the initial polycrystal structure of tungsten thin film developed into single crystal structure as the film grew in thickness.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.33 no.2
• /
• pp.94-99
• /
• 2013

Yanganok, a new single cross variety, was developed by the maize breeding team at the National Institute of Crop Science (NICS), RDA in 2012. This hybrid, which has a high yield of grain was produced by crossing two inbred lines, KS164 and KS163. KS164 is the seed parent and KS163 is the pollen parent of Yanganok. It is a yellow-orange intermediate maize hybrid (Zea mays L.). After a preliminary yield trial and advanced yield trial of Yanganok (Suwon180) in Suwon for 2 years, a regional yield trial was carried out for its growth characteristics, and yields were determined at 4 different locations from 2009 to 2012, with the exception of 2010. It was named 'Yanganok'. The silking date of Yanganok is 2 days earlier than that of the check hybrid, Kwangpyeongok. Plant height of Yanganok is similar to Kwangpyeongok, but its ear height ratio is higher than that of Kwangpyeongok. It has resistance to lodging. Stay-green features of Yanganok are similar to those of Kwangpyeongok. The ear ratio of Yanganok is similar to Kwangpyeongok. It has moderate resistance to southern leaf blight (Bipolaris maydis) and strong resistance to northern leaf blight (Exserohilum turcicum). It has moderate resistance to black streaked dwarf virus (BSDV), ear lot and corn borer. The dry matter yield of Yanganok, 17.45 ton/ha, was similar to that of Kwangpyeongok. The total digestible nutrients (TDN) yield of Yanganok, 11.96 ton/ha, was similar to that of Kwangpyeongok. The grain yield of Yanganok, 8.32 ton/ha was similar to that of Jangdaok. Seed production of Yanganok went well due to a good match during crossing between the seed parent, KS164, and the pollen parent, KS163, in Yeongwol, and F1 seed yield was 1.79 ton/ha. Yanganok would be a suitable cultivar to all plain areas in the Korean peninsula.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.34 no.1
• /
• pp.21-25
• /
• 2014

Singwangok, a new single cross variety, was developed by the maize breeding team at the National Institute of Crop Science (NICS), RDA in 2012. This hybrid, consisting of a high yield of grain, was produced by crossing two inbred lines, KS172 and KS173. KS172 is the seed parent and KS173 is the pollen parent of Singwangok. It is a yellow-orange intermediate maize hybrid (Zea mays L.). After the preliminary yield trial and advanced yield trial of Singwangok (Suwon185) in Suwon for 2 years, the regional yield trial of that was subsequently carried out for its growth characteristics and yield at 3 different locations from 2010 to 2012. It was named as Singwangok. The silking date of Singwangok is similar to the check hybrid, Jangdaok. The plant height of Singwangok is similar to Jangdaok, but its ear height ratio is lower than that of Jangdaok. Moreover, it has a resistance to lodging. The ear number per 100 plants of Singwangok is more 17 than that of Jangdaok, whereas the ear length of Singwangok is similar to Jangdaok. Further, the weight of 100 seeds of Singwangok is similar to Jangdaok. It has a moderate resistance to southern leaf blight (Bipolaris maydis) and a strong resistance to northern leaf blight (Exserohilum turcicum). Furthermore, it has a moderate resistance to the black streaked dwarf virus (BSDV), ear lot and corn borer. The grain yield of Singwangok, 7.81 ton/ha, was similar to that of Jangdaok. The seed production of Singwangok was well processed due to the good match during crossing between the seed parent, KS172 and the pollen parent, KS173, in Yeongwol; the F1 seed yield was 3.84ton/ha. Singwangok would be a suitable cultivar to all plain areas in Korea.

• Journal of Crop Science and Biotechnology
• /
• v.11 no.1
• /
• pp.17-22
• /
• 2008

Aromatic rice has become popular owing to its aroma. Growing demand for aromatic rice has spurred interest in the development of domestic cultivars that offer similar combinations of grain attributes such as texture, cooking characteristics, aroma, and taste. In this study, the most important agronomic attributes and aroma of 26 cultivars from Afghanistan, Iran, and Uzbekistan, and controls from Japan, Thailand, and India were characterized. Also $F_2$ populations derived from the cross between(Jasmine 85 aromatic$\times$Nipponbare non-aromatic) and(Jasmine 85$\times$Basmati 370 aromatic) were obtained. Tasting individual grains, cooking test, 1.7% KOH sensory test, and molecular marker analysis have been applied to distinguish between aromatic and non-aromatic rice. Diversity for some traits of agronomic importance, such as plant height was detected among countries, e.g. Afghan cultivars classified as tall, and Iranian and Uzbek intermediate and short, respectively. Differentiations of panicle, grain, leaf, basal internode, and culm dimension among rice cultivars, indicating the source of rice diversity in Central Asia. According to the results, 6 of 10, 2 of 7, and 0 of 6 of Afghan, Iranian, and Uzbek rice cultivars were scored as aromatic, respectively. Therefore, Afghan cultivars are a good source of aromatic rice germplasm for Central Asia. The expression between aromatic and non-aromatic, and aromatic and aromatic combinations has been evaluated. The observed segregation ratio of these crosses in the $F_2$ populations was tested by $x^2$ analysis against the expected ratio for a single gene. A segregation ratio of 3:1 between non-aromatic and aromatic combination has been detected, while segregation has not been detected between the aromatic and aromatic combinations. Also, parallel results were obtained from the tested aromatic rice cultivars. Thus, our results suggest that a single recessive gene controls aroma in all aromatic rice cultivars.