• 기술발표회
• /
• 통권2006호
• /
• pp.86-100
• /
• 2006

The single drilled shaft foundation has been used in the other countries, but has not used in South Korea at all This foundation is very effective and economic method in South Korea which is easy to meet a good rock mass within 50m depth from the ground We have many experiences to construct 1.52 5m drilled shaft foundations and ability to construct 30m drilled shaft foundation without special efforts The soil behavior is nonlinear, but it can be proposed in linear in practical purpose on bridges. The elastic modulus of soil can be rationally obtained by the method of Road Bridge Design Manual in South Korea using the Schmertmann(1970)'s proposal, and the elastic modulus of rock can be obtained by the field test. In seismic design the column and drilled shaft must be restricted to the elastic design because the behavior of this foundation is flexible and the arrangement of the rebars makes the various defect In this paper the design criteria is compared with FHWA design criteria, and the design criteria is proposed in consistent with Road Bridge Design Manual in South Korea. The single drilled shaft foundation of a test bridge was constructed in the Iksan-Jangsoo highway, and we checked its stability, workability and economy

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.1106-1116
• /
• 2008

Single-pole transmission structures which are supported by drilled shaft foundations are usually subjected to large overturning moments with modest vertical and lateral loads. To analyze the behavior of the drilled shaft under such loading conditions, an analytical model was developed based on beam-column and subgrade reaction methods. Field model tests were performed to calibrate the developed analytical model in which additional subgrade spring models were adopted. The field test results estimated from the calibrated analytical model were compared with those calculated by one spring model and other commercial program. According to the comparison study, the developed analytical model was proven to be a useful tool to analyze the laterally loaded behavior of foundations for single-pole structures.

• 지질공학
• /
• 제18권4호
• /
• pp.493-499
• /
• 2008

본 연구에서는 수평하중을 받는 화강편마암에 근입된 대구경현장타설말뚝에 대하여 수평방향의 거동특성을 분석하기 위하여 시험말뚝인 단일대구경현장타설말뚝 내부에 경사계를 설치하여 단계별 수평하중이 대한 심도별 변위량을 측정하였다. 실측치와 기존 이론식에 의한 계산치를 비교 분석하여 수평변위 거동특성을 평가하였다. 따라서, 단계별 재하하중에 따른 수평변위량의 계측값과 비교한 결과 전체적으로 Chang의 산정식과 유사한 결과를 나타내고 있으나 약간 과소평가 되는 경향이 있다. 그리나 유한차분법(FDM)과 p-y곡선법은 상부구간에서 과대평가 되는 경향을 나타내었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.598-604
• /
• 2010

The drilled pier foundation is widely used to support transmission line structures due to its simplicity of construction. When this foundation type is used in conjunction with a single shaft or H-frame structure, it is subjected to a high overturning moment, combined with modest vertical and shear loads. Since the length and diameter of drilled piers are often governed by a maximum permissible deflection, many drilled piers being installed today are very conservatively designed. In this study, Nine prototype field-tests (1/8 scale) have been conducted in order to determine the vertical and lateral resistance of drilled pier foundation for single pole structures. These test results reveal the test piers behaved essentially as rigid bodies in soil (6D) and the center of rotation of the pier were typically 0.6~0.4 of the pier depth below ground surface. Test results also show the relationship between the applied load and the deflection at the top of the pier is highly nonlinear.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.1087-1094
• /
• 2008

The drilled pier foundation is widely used to support transmission line structures due to its simplicity of construction. When this foundation type is used in conjunction with a single shaft or H-frame structure, it is subjected to a high overturning moment, combined with modest vertical and shear loads. Since the length and diameter of drilled piers are often governed by a maximum permissible deflection, many drilled piers being installed today are very conservatively designed. In this study, Five prototype field-tests (1/8 scale) have been conducted in order to determine the lateral resistance of drilled pier foundation for single pole structures. These test results reveal the test piers behaved essentially as rigid bodies in soil (6D) and the center of rotation of the pier were typically 0.6~0.4 of the pier depth below ground surface. Test results also show the relationship between the applied load and the deflection at the top of the pier is highly nonlinear.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.967-973
• /
• 2004

Rock socketed drilled shafts transfer significant portion of structural loads at the socketed part. Therefore, a proper design of side and base resistances of a shaft at the socket is a major concern for the geotechnical engineers. In this study, we modified the Hoek-Brown criterion to estimate side resistance of rock socketed drilled shafts. Earlier method to compute side resistance of a shaft is linear or power functions of intact rock masses. However, side resistance is mobilized like shearing which influenced by the mechanical properties of concrete and rock masses, adhesion of rock/concrete interface, roughness of rock socket. Therefore, a single coefficient or power of uniaxial compressive strength of intact rock cannot provide accurate values of side resistance in a wide range of the uniaxial compressive strength. A new approach proposed in this study can consider in situ rock mass condition (frequency or discontinuities, weathering condition), and rock types thus, it has a wider applicability than the earlier models.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 말뚝기초 학술발표회
• /
• pp.85-106
• /
• 2000

The load distribution and deformation of drilled shafts subjected to axial loads were evaluated by a load transfer approach. The emphasis was on quantifying the load transfer mechanism at the interface between the shafts and surrounding highly weathered rocks based on a numerical analysis and small-scale tension load tests performed on nine instrumented piles. An analytical method that takes into account the soil coupling effect was developed using a modified Mindlin's point load solution. Based on the analysis, a single-modified hyperbolic model is proposed for the shear transfer function of drilled shafts in highly weathered rocks. Through comparisons with field case studies, it is found that the prediction by the present approach is in good agreement with the general trend observed by in-situ measurements.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.368-376
• /
• 2010

암반의 심도가 얕은 국내지반에서는 푸팅을 사용하지 않는 벤트기초가 매우 경제적인 공법이다. 현장타설말뚝을 이용한 벤트기초공법은 탄성설계로 제한하여 설계를 수행하여 왔으나, 도로교 설계기준에서 제시하는 소성설계를 적용하는 경우 소성힌지 발생지점이 지중에 위치하여 유지관리가 불가하고 소성힌지부에 적용하는 심부구속 철근의 간격 및 보강범위에 대한 기준 제정이 필요하다. 또한 지반의 소성 거동을 모델링 하는 것은 구조 해석시 실무적으로 매우 어려움이 많아 정밀한 해석이 필요하지 않는 경우에 대한 근사 해석법 제시가 필요하다. 본 논문에서는 직경 1m의 현장타설말뚝을 사질토지반에 시공하여 지상 4m 높이에서 반복 재하시험을 수행하여 지반 및 말뚝의 거동을 파악하였으며, 기둥으로서의 거동을 함께 파악하였다. 소성힌지를 지상부에 유도하기 위하여 직경을 변화시키거나, 지중에 강관을 삽입하는 방법을 적용하였으며, 실험결과에 대하여 선형탄성 및 p-y 곡선등 다양한 예측방법과 교량에 대한 모의 설계를 통하여 지반 모델링 방법에 따른 해석결과를 비교하였으며, 실무적으로 적용할 수 있는 설계기준을 제시하였다.

• 한국지반환경공학회 논문집
• /
• 제13권10호
• /
• pp.33-42
• /
• 2012

현장재하시험결과를 이용하여 현재 우리나라를 비롯한 많은 나라에서 사용하고 있는 말뚝기초 설계기준에 대한 효율성을 분석하였다. 문헌조사를 통해 12개의 현장타설말뚝 및 매입말뚝 재하시험자료를 수집하였으며 이를 t-z 방법으로 분석하였다. 재하시험결과로부터 각 설계기준에서 제시하고 있는 (1) Davisson 방법, (2) 말뚝직경의 5% 또는 10%의 침하가 발생하는 하중을 이용하여 극한지지력을 평가하였다. 또한, 미국, 캐나다, 유럽, 그리고 일본의 설계기준에서 각각 제시한 방법을 이용하여 현장타설말뚝과 매입말뚝의 극한 지지력을 계산하였다. 재하시험에서 분석된 극한 지지력과 설계기준에 의해 계산된 극한 지지력을 비교한 결과, 대부분의 설계기준은 말뚝기초의 극한지지력을 보수적으로 예측하는 것으로 나타났다. 그러나 일부 설계기준은 현장타설말뚝의 지지력을 과대평가하는 것으로 나타나 일부 설계기준은 적용 시 주의를 요하는 것으로 분석되었다. 또한, 본 연구는 t-z 방법을 이용하여 말뚝기초의 극한 지지력 및 하중전이 관계를 성공적으로 예측할 수 있음을 알 수 있었다.

• 동력기계공학회지
• /
• 제13권5호
• /
• pp.52-58
• /
• 2009

A gas turbine consists of an upstream compressor and a downstream turbine with a combustion chamber, and also the compressor and the turbine are generally coupled using a single shaft. Many casing bolts are used to assemble two horizontally separated casings, the gas turbine casing and the compressor casing, in both of axial and vertical directions. Because drilled holes for casing bolts in vertical direction are often too close to drilled holes for casing bolts in axial direction, one can observe cracks in the area frequently during operations of a gas turbine. In this study of the root cause analysis for the cracking initiating from the drilled holes of the casings of a gas turbine, the finite element analysis(FEA) was applied to evaluate the thermal and mechanical characteristics of the casings. By applying the field operation data recorded from combined cycle power plants for FEA, thermal and thermo-mechanical characteristics of a gas turbine are analyzed. The crack is initiated at the geometrical weak point, but it is found that the maximum stress is relieved when the same type of cracks is introduced on purpose during FEA. So, it is verified that the local fracture could be delayed by machining the same type of defects near the hole for casing flange bolts of the gas turbine, where the crack is initiated.