• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.5
• /
• pp.53-60
• /
• 2021

Foreign direct investment (FDI) is especially important for developing countries. This study investigates the determinants of FDI in the case of Indonesia. Most empirical researches in this field used time series data of a single country or panel data of several countries. Although panel data analysis is more comprehensive, however results taken from cross-country analysis cannot be directly applied to any specific country in the dataset and therefore lacks practicality. In this research, panel data analysis of a single country is performed to overcome the aforementioned shortcomings. Five determinants of FDI are tested using panel data of 33 Indonesian provinces over 10-year period of time. Two methodologies are adopted, random/fixed effects model and Granger Causality. The results show that only market size significantly affects FDI when tested using both methodologies. Human capital and financial market development show significant result in one of the two methodologies. While, economic growth and infrastructure did not show any significant results at all. This research stresses the importance of comprehensive single country analysis since only one out of five commonly discussed determinants is applicable in the case of Indonesia. Governments should therefore carefully reconsider the use of cross-country analysis as a basis of their policy formulations.

• Journal of Korean Public Health Nursing
• /
• v.23 no.2
• /
• pp.162-173
• /
• 2009

Purpose: This study investigated the health and socioeconomic status of single-parent and partnered families, and examined the intersection between sex and single-parent status focusing on inequalities of health and socioeconomic status. Methods: This was a cross-sectional study using the data from the nationally representative 2005 Korean National Health and Nutrition Examination Survey. A total of 14,827 respondents had custody of their own children and other family members (13,943 were coupled families and 891 were single-parent). Results: Our result indicate that single-parent had poorer health status and were more likely to have lower educational attainment, lower household income, no home ownership and be unemployed. However, the association between single-parent status and socioeconomic and health inequality were in divergent ways according to sex. The most socioeconomically disadvantaged were single-parent women. Inequalities in health differ markedly by sex but vary little according to single-parent status. Conclusions: An uneven distribution of socioeconomic resources might help us to understand why single-parent, both women and men, have worse health than parents who live together. Previously recognized sex gap with regard to health status also might help us to understand the difference in health between single-parent men and single-parent women found here.

• Journal of Electrical Engineering and information Science
• /
• v.3 no.3
• /
• pp.336-341
• /
• 1998

We describe the architecture of an optical cross-connect (OXC) which is modular in structure and is able to be upgraded to a virtual wavelength path by adding wavelength converters. The additional feature of the OXC is the all-optical nature. It can be implemented with commercial components including mechanical optical switches. As a result of the test on the experimental OXC, it has been shown that 2.5 Gb/s signal can be transmitted via the OXC through 100 km length o an ordinary single mode fiber with 3 dB penalty.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.15 no.1
• /
• pp.23-35
• /
• 1990

A mathematical model for a dynamic capacitate facility location problem is formulated by a mixed integer problem. The objective of the model is to minimize total discounted costs that include fixed charges and distributed costs. The Cross Decomposition method of Van Roy is extended and applied to solve the dynamic capacitated facility location problem. The method unifies Benders Decomposition and Lagrangean relaxation into a single framework. It successively solves a transportation problem and a dynamic uncapacitated facility location problem as two subproblems. Computational results are compared with those of general mixed integer programming.

• ETRI Journal
• /
• v.34 no.6
• /
• pp.858-868
• /
• 2012

In this paper, stochastic models for the cross-correlation of multiple channels are established based on measurement data collected using a wideband multiple-input multiple-output relay Band Exploration and Channel Sounder system at 3.7 GHz. We propose models for the cross-correlation characteristics of large-scale parameters (LSPs) between two links, that is, the base station and mobile station (MS) link and the relay station and MS link. The LSPs include shadow fading, Rician K-factor, delay spread, angle spread of arrival, and angle spread of departure. Furthermore, models are established for the cross-correlation of the small-scale fading in the impulse responses of two links. The statistics of these model parameters are investigated as functions of geometrical features of the multilink. They are extracted from a large amount of cross-correlation observations, which are obtained in three measurement sites along more than one hundred measurement routes. These models can be used together with the standard single-link channel models for the generation of correlated components, for example, path clusters, in two separate channels.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.12
• /
• pp.1106-1112
• /
• 2000

In this paper, we present a vision system which measures the cross-section of a hot wire-rod in the steel plant. We developed a mobile vision system capable of accurate measurement, which is strong to vibration and jolt when moving. Our system uses green laser light sources and CCD cameras as a sensor, where laser sheet beams form a cross-section contour on the surface of the hot wire-rod and the reflected light from the wire-rode is imaged on the CCD cameras. We use four lasers and four cameras to obtain the image with the complete cross-section contour without an occlusion region. We also perform camera calibrations to obtain each cameras physical parameters by using a single calibration pattern sheet. In our measuring algorithm, distorted four-camera images are corrected by using the camera calibration information and added to generate an image with the complete cross-section contour of the wire-rod. Then, from this image, the cross-section contour of the wire-rod is extracted by preprocessing and segmentation, and its height, width and area are measured.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.3
• /
• pp.48-54
• /
• 2000

In this study the characteristics of chip formation of the cold drawn Bi-S free machining steels were assessed. And for comparison those of the cold drawn Pb-S free machining steel the hot rolled low carbon steel which has MnS as free machining inclusions and the conventional steels were also investigated. During chip formation the cold drawn free machining steels show relatively little change in thickness and width of chip compare to those of the conventional carbon steels. And a single parameter which indicates the degree of deformation during chip formation chip cross-section area ratio is introduced. The chip cross-section area ratio is defined as chip cross-section area is divided by undeformed chip cross-section area. The variational patters of the chip cross-section area ratio of the materials cut are similar to those of the shear strain values. The shear stress however seems to be dependent on the carbon content of the materials. The cold drawn Bi-S and Pb-S steels show nearly the same chip forming behaviors and the energy consumed during chip formation is almost same. A low carbon steel without free machining aids shows poor chip breakability due to its high ductility. By introducing a small amount of free machining inclusions such as MnS Bi, Pb or merely increasing carbon content the chip breakability improves significantly.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.351-356
• /
• 1999

In this study, the characteristics of chip formation of the cold drawn Bi-S free machining steels were assessed. And for comparison, those of the cold drawn Pb-S free machining steel, the hot rolled low carbon steel which has MnS as free machining inclusions and the conventional steels were also investigated. During chip formation, the cold drawn free machining steels show relatively little change in thickness and width of chip compare to those of the conventional carbon steels. And a single parameter which indicates the degree of deformation during chip formation, 'chip cross-section area ratio' is introduced. The chip cross-section area. The variational patterns of cross-section area is divided by undeformed chip cross-section area. The variational patterns of the chip cross-section area ratio of the materials cut are similar to those of the shear strain values. The shear stress, however, seems to be dependent on the carbon content of the materials. The cold drawn BiS and Pb-S steels show nearly the same chip forming behaviors and the energy consumed during chip formation is almost same. A low carbon steel without free machining aids shows poor chip breakability due to its high ductility. By introducing a small amount of non-metallic inclusions such as MnS, Bi, Pb or merely increasing carbon content the chip breakability improves significantly.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.8
• /
• pp.121-127
• /
• 2013

Memory devices including SRAM and DRAM are very susceptible to high energy radiation particles in the space. Abnormal operation of the devices is caused by SEE or TID. This paper presents a method to estimate proton SEU cross section representing the susceptibility of the latch circuit that the unit cell of the SRAM and proposes a new latch circuit to mitigate the SEU. 50b shift register was fabricated by using the conventional latch and the proposed latch in $0.35{\mu}m$ process. Irradiation experiment was conducted at KIRAMS by using 43MeV proton beam. It was found that the proposed latch-shift register is not affected by the radiation environment compared to the conventional latch-shift register.

• Journal of Chest Surgery
• /
• v.47 no.4
• /
• pp.327-332
• /
• 2014

Single-port video-assisted thoracic surgery (VATS) has slowly established itself as an alternate surgical approach for the treatment of an increasingly wide range of thoracic conditions. The potential benefits of fewer surgical incisions, better cosmesis, and less postoperative pain and paraesthesia have led to the technique's popularity worldwide. The limited single small incision through which the surgeon has to operate poses challenges that are slowly being addressed by improvements in instrument design. Of note, instruments and video-camera systems that are narrower and angulated have made single-port VATS major lung resection easier to perform and learn. In the future, we may see the development of subcostal or embryonic natural orifice translumenal endoscopic surgery access, evolution in anaesthesia strategies, and cross-discipline imaging-assisted lesion localization for single-port VATS procedures.