• Journal of Power Electronics
• /
• v.5 no.1
• /
• pp.76-82
• /
• 2005

A novel variant of full multi-modulation applications to diode-clamped and cascade multilevel inverter-termed single carrier multi-modulation is presented. The proposed PWM-technique is advantageous for its simple implementation. The correlation between multi-carrier and single-carrier multi-modulations is deduced. For the PWM methods, a mathematical model of voltage source inverter and general algorithm for the multi-modulating modulator are proposed. The theory is demonstrated by simulation results

• Journal of Power Electronics
• /
• v.10 no.4
• /
• pp.365-373
• /
• 2010

This paper proposes a hybrid single carrier sinusoidal modulation suitable for multiphase multilevel inverters. Multiphase multilevel inverters are controlled by hybrid modulation to provide multiphase variable voltage and a variable frequency supply. The proposed modulation combines the benefits of fundamental frequency modulation and single carrier sinusoidal modulation (SC-SPWM) strategies. The main characteristics of hybrid modulation are a reduction in switching losses and improved harmonic performance. The proposed algorithm can be applied to cascaded multilevel inverter topologies. It has low computational complexity and it is suitable for hardware implementations. SC-SPWM and its base modulation design are implemented on a TMS320F2407 digital signal processor (DSP). A Complex Programmable Logic Device realizes the hybrid PWM algorithm and it is integrated with a DSP processor for hybrid SC-SPWM generation. The feasibility of this hybrid modulation is verified by spectral analysis, power loss analysis, simulation and experimental results.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.61 no.4
• /
• pp.234-238
• /
• 2012

This paper proposes a multiplexed space-frequency block coding (SFBC) technique for single-carrier modulation with frequency domain equalization. Multiplexed space-frequency block coding technique for single-carrier modulation uses multiple groups of two transmitters and suppresses the interference signals of other SFBC groups at the receiver. In this paper, we reconfigure transmit signals to adapt them for multiplexed SFBC for single-carrier modulation with frequency domain equalization and receiver structures and propose a structure for transmitter and receiver, show its performance is better than the traditional algorithm by simulations.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.65 no.4
• /
• pp.316-320
• /
• 2016

This paper proposes an alternate time-switched multiplexed space-frequency block coding technique for single-carrier modulation with frequency domain equalization. The traditional multiplexed space-frequency block coding technique for single-carrier modulation uses multiple groups of two transmitters and suppresses the interference signals of other SFBC groups at the receiver. In this paper, we reconfigure transmit signals to adapt them for alternate time-switched multiplexed SFBC for single-carrier modulation with frequency domain equalization and receiver structures and propose a structure for transmitter and receiver, show that its performance is better than the traditional algorithm by simulations.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.66 no.4
• /
• pp.247-251
• /
• 2017

This paper proposes a low power transmission technique for single-carrier modulation with frequency domain equalization. As time domain signals and frequency domain signals have unique corresponding functions, inserting zeros after each symbol causes a repetition in other domain, so maximal ratio combining technique using repetitive transmission can be applied in the frequency domain. In this paper, we configure transmit signals to insert zeros after each symbols for single-carrier modulation with frequency domain equalization and maximal ratio receive combining block in the receiver structures, propose a structure for transmitter and receiver and show that its performance is better than the traditional algorithm by simulations.

• Proceedings of the KIPE Conference
• /
• 2018.11a
• /
• pp.203-204
• /
• 2018

Conventional buck-boost converter has the disadvantage that the output voltage is inverted. The single phase non-inverting buck-boost converter(SPNIBBC) used four swithes has H-bridge type Circuit. The output voltage is not inverted. The SPNIBBC can be controlled by the single carrier method and the dual carrier method according to the modulation method. In this paper, we have fabricated the converter and compared the efficiency according to the modulation method.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.5
• /
• pp.1986-1995
• /
• 2018

In this paper, a novel neutral-point voltage balancing scheme for NPC three-level inverters using carrier-based sinusoidal pulse width modulation (SPWM) method is developed. The new modulation approach, based on the obtained expressions of zero sequence voltage in all six sectors, can significantly suppress the low-frequency voltage oscillation in the neutral point at high modulation index and achieve a fast voltage-balancing dynamic performance. The implementation of the proposed method is very simple. Another attractive feature is that the scheme can stably control any voltage difference between the two dc-link capacitors within a certain range without using any extra hardware. Furthermore, the presented scheme is also applicable to the single-phase NPC three-level inverter. It can maintain the neutral-point voltage balance at full modulation index and improve the voltage-balancing dynamic performance of the single-phase NPC three-level inverter. The performance of the proposed strategy and its benefits over other previous techniques are verified experimentally.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.7A
• /
• pp.554-561
• /
• 2009

In this paper, we propose a novel Vehicular Ad-hoc Network(VANET) which includes communication and ranging features, using Spread Spectrum(SS) multi-carrier modulation scheme. In existing methods, a spread spectrum technique was used to communicate with other vehicles and raging was possible by detecting phase difference between transmission/reception of the PN signal. However, the use of high-speed PN signals is mandatory to detect possible errors of phase difference and to increase the analysis capacity. In the proposed system, multi-carrier modulation scheme was used as solution of mentioned problem. The multi-carrier modulation scheme uses smaller PN signal and chip-rate than the single-carrier modulation, so it is possible to send multiple carrier waves using the same frequency range. This technique (multiple carrier waves) allows to have the Equal Gain Combing (EGC) diversity effect, providing better result in phase difference error detection and raging accuracy.

• Journal of Industrial Technology
• /
• v.17
• /
• pp.153-160
• /
• 1997

This paper has analyzed the performance against a single tone jamming for the CPM DS-SS system with a Binary FSK Modulation. The CPM DS-SS system designed with the different phase shift of the same pseude-noise code has the advantage of reducing the jamming and interference effects on multi-users communication environment. Analytical results show that the system preformance improves by increasing parrallel users in the presence of the coherent single-tone, which is the worst interference since the jamming signal has the same frequency as a carrier.

• Journal of Power Electronics
• /
• v.13 no.1
• /
• pp.86-93
• /
• 2013

A half-cycle-waveform inversion based three reference modulations seven-level SPWM (TRM-SPWM) scheme with one carrier is proposed in this paper. To keep the same comparison logics for the modulations and carrier during the negative half cycle and the positive one for the modulations, in the negative half cycle of the modulations, the DC offsets related to the amplitude of the carrier are set on the three modulations, respectively. The seven-level SPWM waveform with dead time thereby is implemented with only one Digital Signal Processor (DSP) without any other attached logic circuit. The basis principle of the proposed TRM-SPWM is analyzed in detail, and the frequency spectrums of the conventional and the proposed schemes are derived and compared with each other through simulation. The DSP based implementation is presented and detailed experimental waveforms verify the accuracy and feasibility of the proposed TRM-SPWM scheme.