• International Journal of Control, Automation, and Systems
• /
• v.1 no.2
• /
• pp.184-193
• /
• 2003

Biaffine Matrix Inequality (BMI) is known to provide the most general framework in control synthesis, but problems involving BMI's are very difficult to solve because nonconvex optimization should be solved. In the previous paper, we proposed a new solver for problems involving BMI's using Evolutionary Algorithms (EA). In this paper, we solve several control synthesis examples such as Reduced-order control, Simultaneous stabilization, Multi-objective control, $H_{\infty}$ optimal control, Maxed $H_2$ / $H_{\infty}$control design, and Robust $H_{\infty}$ control. Each of these problems is formulated as the standard BMI form, and solved by the proposed algorithm. The performance in each case is compared with those of conventional methods.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.6
• /
• pp.136-147
• /
• 1998

An experimental facility consisting of two 3$\times$4.4$\times$2.8m rooms identical in construction is built. Each room has a control system and storage tank supplying hot water to the radiant floor heating system. The facility enables simultaneous comparison of two different control strategies each implemented in a separate room. The operating performance of three kinds of flow control scheme is tested and compared in this study: (ⅰ) conventional on-off control based on feedback from room air temperature (ⅱ) TPSC(two parameter switching control )(ⅲ) TPOC(two parameter on-off control). Results show that TPSC and TPOC using room air and surface temperature sequentially as feedback signal to control hot water supply is the better temperature regulation scheme than conventional control based on feedback from only room air temperature. They are good candidates for the room with radiant floor heating system under continuous and intermittent heating mode.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.32 no.5
• /
• pp.333-340
• /
• 2018

Gamiguibi-tang (GGBT) is a traditional herbal medicine generally used to treat anemia, insomnia, anxiety, and nervousness. GGBT is being commercially produced in the form of extract granule and the quality control methods are specified in the Korean Herbal Pharmacopeia (KHP). However, there is no method to simultaneously analyze compound preparations. In this study, a HPLC method was developed and validated for the simultaneous determination of marker compounds in GGBT. And the contents of marker components and biological activities of the commercial GGBT extract granules (GGBT-2 and GGBT-3) were compared with those of the GGBT decoction (GGBT-1). We confirmed the robustness of simultaneous analytical method by monitoring the contents of the commercial GGBT products and carrying out validation. The marker components of GGBT were geniposide ($8.03{\sim}12.70{\mu}g/mL$), paeoniflorin ($2.79{\sim}4.25{\mu}g/mL$) and glycyrrhizic acid ($5.06{\sim}6.30{\mu}g/mL$). DPPH and ABTS radical scavenging activities were 47.34~63.17% and 21.52~33.61% in the GGBT products concentration of $1,000{\mu}g/mL$, respectively. The GGBT products significantly decreased NO, iNOS and COX-2 production in lipopolysaccharide (LPS)-induced RAW 264.7 macrophages in a concentration-dependent manner. The GGBT-2 had higher contents of marker components and biological activities than GGBT-1 and GGBT-3. The research suggest that be used in developing quality control methods for enhancing the quality of herbal medicines.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.11
• /
• pp.1577-1585
• /
• 2013

Bioethanol production from lignocellulose is considered as a sustainable biofuel supply. However, the low cellulose hydrolysis efficiency limits the cellulosic ethanol production. The cellulase is strongly inhibited by the major end product cellobiose, which can be relieved by the addition of ${\beta}$-glucosidase. In this study, three ${\beta}$-glucosidases from different organisms were respectively expressed in Saccharomyces cerevisiae and the ${\beta}$-glucosidase from Saccharomycopsis fibuligera showed the best activity (5.2 U/ml). The recombinant strain with S. fibuligera ${\beta}$-glucosidase could metabolize cellobiose with a specific growth rate similar to the control strain in glucose. This recombinant strain showed higher hydrolysis efficiency in the cellulose simultaneous saccharification and fermentation, when using the Trichoderma reesei cellulase, which is short of the ${\beta}$-glucosidase activity. The final ethanol concentration was 110% (using Avicel) and 89% (using acid-pretreated corncob) higher than the control strain. These results demonstrated the effect of ${\beta}$-glucosidase secretion in the recombinant S. cerevisiae for enhancing cellulosic ethanol conversion.

• Child Health Nursing Research
• /
• v.14 no.2
• /
• pp.129-137
• /
• 2008

Purpose: To examine the effects on skin injury, pain, and anxiety when nurses and children simultaneous wash their hands before IV injections. Method: A nonequivalent control group, non-synchronized design study was used with 61 children. For a month and a half, children in the experimental group(30) following hand-washing guidelines, washed their hands with nurses before IV insertion. Anxiety and pain were observed and recorded during IV insertion using the Anxiety Reaction Scale and FACES pain scale. After 48-72 hours on IV therapy with an arm-board, skin condition was checked by a research assistant according to guidelines for assessing skin injury developed by the researcher. t-test, ${\chi}^2$-test, Pearson correlation, and Kendall's tau b were used to analyze data with the SPSS program. Results: Children who washed their hands with the nurse before IV insertion showed less pain (p =.021) and skin injury (p <.001) compared to the control group. Conclusion: This finding suggests that simultaneous hand washing by nurse and child before IV injection has a strong effect on skin injury caused by arm-boards used to maintain IV therapy as well as on pain during IV insertion. This program demonstrates an effective intervention to prevent skin injuries in children on IV therapy.

• Korean Journal of Pharmacognosy
• /
• v.43 no.2
• /
• pp.137-146
• /
• 2012

Dipsaci Radix (Dipsacaceae) has been used as a tonic, an analgesic, anti-inflammatory and anti-complement agents in traditional herbal medicine for the therapy of low back pain, knee pain, rheumatic arthritis, traumatic hematoma, and bone fractures. A high-performance liquid chromatography-electrospray ionization-mass spectrometric method (HPLC-ESI-MS) was developed for the simultaneous quantitation method of the five compounds from the herbal drug: asperosaponin VI and asperosaponin XII (terpene glycosides), sweroside, loganin and dipsacus A(iridoid glycosides). HPLC separation of the analytes was achieved on a C18 column ($150{\times}2.0$ mm i.d., 5 ${\mu}m$) using the aqueous methanol containing 5 mM ammonium acetate with gradient flow of the mobile phase. Detection of the analytes was performed by positive ion electrospray ionization, and selected ion monitoring was used for data acquisition using m/z corresponding molecular adduct ion, $[M+NH_4]^+$ and $[M+H]^+$. Calibration graphs showed good linearity ($r^2$=0.9997) over the wide range of the analytes; intra- and inter-day precisions (RSD, %) were within 9.1% and the accuracy between 94.0-111.0%. Recoveries of the analytes through the assay procedure were in the range of 93.7-110.8%. Analytical results of the herbal drugs of Dipsaci Radix (17 samples) show wide distribution of the five marker compounds and clear difference of the species from Phlomidis Radix (4 samples). The developed method would provide a practical guide for the quality control of the herbal drug.

• Journal of Environmental Health Sciences
• /
• v.45 no.6
• /
• pp.594-604
• /
• 2019

Objectives: This study developed and validated an analysis method of urinary metals and metalloids that can be applied inductively with coupled plasma mass spectrometry (ICP-MS). Methods: 0.3 mL of urine was used to analyze 25 metal and metalloid compounds using ICP-MS. The validation of the analytical method included linearity, accuracy, precision, and the calculation of detection limits. In addition, a comparison test was performed with the graphite furnace atomic absorption spectrometry (GF-AAS) method, which is the current standard method, with urine samples of 66 healthy subjects. Results: The linearities (R²) of calibration curves of all 25 compounds were ≥ 0.999. Of the 25 compounds, the intra-day and inter-day accuracy% of 17 and 20 met ≤15%, respectively. In addition, fifteen compounds showed ≤15% recovery% for certificated reference materials. Intraclass correlation coefficients of the comparison between the current methods and new methods in this study were 0.952 (p-value<0.001) and 0.911 (p-value<0.001) for urinary cadmium and mercury, respectively. Conclusion: This study proposes an efficient simultaneous methodology that can analyze multi elements in smaller sample amounts. More reproduction experiments are needed in the future.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.12
• /
• pp.1477-1485
• /
• 2011

Dyeability and colorfastness of the blended knits of cotton/rayon (40/60; C/R) and wool/tencel (10/90; W/T) are examined using the natural dyestuff ($Pinux^{TM}$) manufactured from Pinus radiata pine bark extract. In addition, pre-treatments (such as bleaching, mercerization and cationization) are performed to improve dyeability and colorfastness. The $Pinux^{TM}$ powder dyestuffs produced by Pinux Co., Ltd. are used as dyestuffs and their properties are examined for dyeing concentration (0.5-2% (owb)), dyeing time (30-120 minutes) and dyeing temperature (30-$90^{\circ}C$). Dyeability is evaluated with K/S value at 400nm, which is the maximum absorption wavelength for $Pinux^{TM}$. The results show the dyeability of W/T sample containing protein fiber with $Pinux^{TM}$ is superior to all cellulose fiber C/R. A concentration of dyestuff greater than 1.5% (owb), dyeing time 120 minutes and dyeing temperature of $90^{\circ}C$ are the most optimized conditions. It shows that the dyeability of C/R and W/T samples are high in the condition of an acid-dyeing bath and that dyeability highly declined in alkaline bath due to the instability of the proanthocyanidin pigment. After analyzing the effect of bleaching, mercerizing and cationizing (as pre-treatments on dyeability) it was concluded that the dyeability of the C/R sample was enhanced by mercerization but no significant effect by cationization. However, the simultaneous treatment of cationizing and dyeing resulted in far improved dyeability compared to dyeing after cationizing pre-treatment. As for the W/T sample, the effect of cationization was more prominent than the C/R sample. Colorfastness to color changes in the control W/T sample was higher than that of C/R's level 1-2, and it increased to Level 2 when bleaching pre-treatment was given and when a simultaneous cationizing treatment was adopted to the dyeing process. Colorfastness to light in W/T control sample resulted in Level 3 and further increased to an excellent Level of 4 with bleaching and simultaneous cationizing during dyeing process.

• Journal of The Korean Society of Integrative Medicine
• /
• v.7 no.3
• /
• pp.117-125
• /
• 2019

Purpose : The purpose of this study was to determine the effects of simultaneous application of focal vibration stimulation and task-oriented training on the improvement in upper extremity motor function after stroke. Methods : The study period was from January to April 2019; 23 patients who fulfilled the study eligibility criteria were enrolled. The participants were divided into two groups: the experimental group with vibration stimulation and task-oriented training and the control group with only task-oriented training. Training was conducted in a total of 20 sessions, 5 times a week for 30 minutes a day for 4 weeks. The amount of use of the affected and unaffected side by accelerometers, and Box and Block test (BBT), Action Research Arm Test (ARAT) was measured with a pre-test, a post-test. Wilcoxon Signed Rank Test and Analysis of Covariance were used to compare and analyze the changes within and between the groups. Results : Both the groups showed statistically significant changes in the results of the BBT and the ARAT, as well as the amount of use of the affected and unaffected side. Regarding the use of the affected side, BBT results, and the grasp and gross movement item of the ARAT showed significant changes in the experimental group compared with the control group. Conclusion : We found that simultaneous application of focal vibration stimulation and task-oriented training was more effective than task-oriented training alone. A large-scale comparative study involving a group that is only given vibration stimulation should be conducted for more generalizable results.

• Journal of KSNVE
• /
• v.7 no.1
• /
• pp.161-168
• /
• 1997

The present paper describes the vibration control experiment of composite plates with bonded piezoelectric sensor and actuator. The system is modeled as two degree-of-freedom system using modal coordinates and the system parameters are obtained from vibration tests. Kalman filter is adopted for extracting modal coordinates from sensor signal, and control algorithms applied to the system are Linear Quadratic Gaussian(LQG) control, Bang-Bang Control (BBC), Negative Velocity Feedback(NVF), Proportional Derivative Control(PDC). From observation of the spillover and control perfomance, it is concluded that a higher order control algorithm such as LQG rather than BBG, NVF, PDC is suitable for efficient simultaneous control of both bending and twisting modes of composite plates.