• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.12B
• /
• pp.1665-1676
• /
• 2001

The effect of spreading gain control on the throughput of a CDMA slotted ALOHA system is considered. Mobile users transmit packets over a shared channel, and the packets transmitted in the same time slot over the shared channel act as simultaneous access interference (SAI). When using spread-spectrum signal, a CDMA slotted ALOHA channel achieves high probability of capture due to the property of high title resolution, and the bit rate of user information is determined by spreading gain. When the SAI level gets larger, the high value of spreading gain enhances the packet throughput by increasing the probability of a successful packet transmission, while it degrades the of the effective throughput by reducing the user information bits carried within a packer. To solve the problem, we investigated the effect of the capture probability and the SAI level on these system throughputs, and evaluated the throughput performance of the system for each spreading gain control scheme. The results showed that the maximum effective throughput could be achieved with an unified method despite the variation of the SAI level by deriving an optimal value of the spreading gain according to 171e system states.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.4
• /
• pp.389-400
• /
• 2008

As the wireless network technologies and the capability of the mobile terminals are evolving, advanced peer to peer applications for mobile users are attracting interests. In this paper, we propose the mobile P2P communication platform(MPCP) which provides transparency to the wireless network technologies and solutions to the limited resources of the mobile terminals. MPCP classifies the connection into two levels: a virtual channel and a session. A virtual channel is the network layer connection between the terminals whereas a session is the application layer connection. MPCP classifies the sessions into four types and applies different scheduling priority and data processing policies such as segmentation and reassembly. It selects proper wireless network technologies depending on the distance between the communication endpoints. To acquire dynamically changed access address, we harness the Session Initiation Protocol. We implemented MPCP on embedded Linux simulator and utilized the implementation in mobile P2P service development. For the quantitative analysis, we compared the performance of MPCP with that of ftp. Regardless of the number of simultaneous sessions, MPCP maintains the relative performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.1B
• /
• pp.1-7
• /
• 2000

Generally, one-dimensional fiber optic code-division multiple-access(CDMA) system is encoded and decoded using optical orthogonal codes(OOC’s), where two-dimensional fiber optic CDMA system uses optical orthogonal signature pattern codes(OOSPC’s) for parallel data link process. The OOSPC’s should have good autocorrelation and cross-correlation properties. However, if timing information or synchronization of OOSPC’s can be obtained by other means, the property of autocorrelation may not be restricted and we can increase the number of pattern codes. In this paper we introduce the fiber optic CDMA system for parallel transmission of two-dimensional data and investigate methods of generation of two-dimensional pattern codes. The probability density function of interference noise is calculated in interfering OOSPC’s of the users and the corresponding bit error rate is derived.. We compare each OOSPC’s by plotting bit error rate versus threshold values and the number of simultaneous users, from the result, we propose the optimal OOSPC’s conditions for the parallel transmission of two-dimensional data.

• Journal of KIISE
• /
• v.43 no.2
• /
• pp.163-176
• /
• 2016

The contention overhead on the same channel in an NoC architecture can significantly increase a communication delay due to the simultaneous communication requests that occur. To reduce the overall overhead, we propose task-to-tile binding techniques for an NoC-based manycore platform, whereby it is assumed that the task mapping decision has already made. Since the NoC architecture may have multiple memory tiles as its size grows, memory clustering is used to balance the load of memory by making applications access different memory tiles. We assume that the information on the communication overhead of each application is known since it is specified in a dataflow task graph. Using this information, this paper proposes two heurisitics that perform binding of multiple tasks at once based on a proper memory clustering method. Experiments with an NoC simulator prove that the proposed heurisitic shows performance gains that are 25% greater than that of the previous binding heuristic.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.6
• /
• pp.703-709
• /
• 2014

In the AMP(Asymmetric Multiprocessing) based dual core using core-specific operating system in a single processor system, shared memory method is used to send data between processors in dual core. To used shared memory in different operating systems, there is a problem of needing to solving the issue of message communication and synchronization between the two operations systems. In this paper, separate memory controller was used for data sharing between different processor cores in dual core environment. This controller can designate two slave ports to allow simultaneous access from two processors, and in the case of process data simultaneously by two processors, priority order of slave ports is determined through memory mediator. When sending data from A to B processor, SRAM area was logically separated into 8 pages. It allowed using memory area from multiple processes with the size of 4KByte per page, and control register with the size of 4Byte was used to discern the usability of current page.

• Journal of Periodontal and Implant Science
• /
• v.40 no.2
• /
• pp.76-85
• /
• 2010

Purpose: This study aimed to evaluate the effectiveness of the modified sinus floor elevation technique described hereafter as a "hybrid technique," in 11 patients with severely resorbed posterior maxillae. Methods: Eleven patients who received 22 implants in the maxillary premolar and molar areas by the hybrid technique were enrolled in this study. A slot-shaped osteotomy for access was prepared on the lateral wall along the lower border of the sinus floor. The Schneiderian membrane was fully reflected through the lateral slot. Following drilling with the membrane protected by a periosteal elevator, the bone was grafted. All implants were placed simultaneously with sinus augmentation. The cumulative success rate was calculated and clinical parameters were recorded. Radiographic measurements were performed. Results: All implants were well maintained at last follow up (cumulative success rate=100%). The mean residual bone height, augmented bone height, crown-to-implant ratio, and marginal bone loss were $4.1{\pm}1.64mm$, $8.76{\pm}1.77mm$, $1.21{\pm}0.34mm$, and $0.34{\pm}0.72mm$, respectively. Conclusions: Simultaneous implant placement with sinus augmentation by hybrid technique showed successful clinical results over a 2-year observation period and may be a reliable modality for reconstruction of a severely resorbed posterior maxilla.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.2
• /
• pp.202-207
• /
• 2013

RFID technology is applied to port logistics applications since it monitors objects wirelessly without line of sight and constructs ubiquitous system with low cost. Changes of stock status in the warehouse environment make the technology more important for managing such frequent storing and un-storing. Although the RFID has beneficial characteristics of low cost and low complexity, simultaneous responses of RFID tags cause tag identification collision due to absence of elaborate medium access control scheme. Several algorithms have been proposed to overcome the tag collision problem. However, it is difficult to adopt the methods to the logistics systems that has varying loads since there was no consideration on RFID tag's mobility. Therefore, we propose an efficient RFID tag anti-collision protocol, and simulation results demonstrate performance improvement by using the proposed scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.3B
• /
• pp.472-486
• /
• 2000

This paper analysis the performance of joint receiving structure consisting of the decorrelating multiuser detection and beamfromenr-RAKE receive for DS-CDMA communication systems. In asynchronous transmission as the number of simultaneous users increase. the capacity of CDMA system becomes severly reduced due to the nonideal orthogonality between user-assigned PN sequences and improper power control. Accordingly, the CDMA receiving system becomes vulnerable to the multiple access interferences and the near-far problem under multipath fading channel environment. To withstand these undesired performance degradations, this paper proposes the new type of multiuser detection which has a form of the hybrid structure of concatenating beamformer-RAKE receiver and decorrelating multiuser detection. the beam former-RAKE receiver performs temporal and spatial diversity combining with alleviating fading effect and suppressing undesired interferences, and the multiuser detection plays a role of making the receiver robust to the near-far problem. Regarding the individual merit on the usage of either multiuser detection or beamformer-RAKE receiver, the hybrid one is expected to produce the enhanced performance in multipath fading CDMA channel. However major drawback of using decorrelating multiuser detection for practical deployment is arised from its computational complexity , which is exponentially increased as more number of users and transmitted symbols involve. To diminish the computational complexity, this paper exploits an efficient block Toeplitz inversion technique using matrix Levinson polynomial will be introduced. And this paper provided the mathematical analysis to show the efficiency of the proposed joint structure under the multipath propagation environment. And results of a series of exhaustive computer simulations are presented in order to demonstrate the overall performance of the proposed hybrid structure in multipath fading CDMA channel.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.3
• /
• pp.11-17
• /
• 2003

In this paper, we implemented 2-wire (data gnd) RS232C serial communication interface by applying the Collision Sensing Multiple Access(CSMA) Protocol. The transmitting and receiving wires of RS232C pert are connected together by the interface circuit forming data wire without hardware modification On two-wired common channel connection simultaneous transmission Don mere than two hosts causes data collision. The collision is detected by loop-back test of transmission data comparing with the fed back data to detect the data distortion. Various models are adopted to reduce the probability of retransmitted data collision and experiments show the performance of each cases. Due to allowing multiple hosts to be accessed through the common communication channel with minimum circuit addition the result of this paper can be easily applied for conventional RS232C instruments and machines to connect to the single data communication line.

• KIPS Transactions on Computer and Communication Systems
• /
• v.2 no.11
• /
• pp.483-488
• /
• 2013

Users can access their data anywhere, at any time by using outsourced storage. But they cannot know how service provider manage the data. Even user cannot know when data damaged. To solve these problems, the outsourced storage auditing schemes has been proposed. Most proposed schemes are based on Homomorphic Verifiable Tags. But it has computational efficiency limitation because data used to exponent. In this paper, we propose a novel approach to outsourced storage auditing scheme using coefficient matrix. In the proposed scheme, data used to auditing by coefficient matrix form. Auditing procedures are proceed as solving the linear simultaneous equation. The auditor can audit easily by solving the equation using solution vector. The auditor can audit the n size data using sqrt(n) size data through out proposed scheme.