• Journal of the Earthquake Engineering Society of Korea
• /
• v.24 no.2
• /
• pp.59-65
• /
• 2020

The empirical Green's function method is applied to the foreshock and the mainshock of the 2016 Gyeongju earthquake to simulate strong ground motions of the mainshock and scenario earthquake at seismic stations of seven metropolises in South Korea, respectively. To identify the applicability of the method in advance, the mainshock is simulated, assuming the foreshock as the empirical Green's function. As a result of the simulation, the overall shape, the amplitude of PGA, and the duration and response spectra of the simulated seismic waveforms are similar with those of the observed seismic waveforms. Based on this result, a scenario earthquake on the causative fault of Gyeongju earthquake with a moment magnitude 6.5 is simulated, assuming that the mainshock serves as the empirical Green's function. As a result, the amplitude of PGA and the duration of simulated seismic waveforms are significantly increased and extended, and the spectral amplitude of the low frequency band is relatively increased compared with that of the high frequency band. If the empirical Green's function method is applied to several recent well-recorded moderate earthquakes, the simulated seismic waveforms can be used as not only input data for developing ground motion prediction equations, but also input data for creating the design response spectra of major facilities in South Korea.

• Natural Product Sciences
• /
• v.25 no.1
• /
• pp.1-10
• /
• 2019

The ginsenoside content was compared with wild simulated ginseng (Panax ginseng) collected every season at 11 wild simulated ginseng plantations in Korea. As a result, the total saponin of 7 years old wild simulated ginseng showed the highest content of 4.5% in spring sampling wild simulated ginseng, 2.0% in summer sampling wild simulated ginseng, 1.2% in winter sampling wild simulated ginseng and 1.0% in autumn sampling wild simulated ginseng. And also, the total saponin of 10 years old wild simulated ginseng showed the highest content of 3.9% in spring sampling wild simulated ginseng, summer sampling wild simulated ginseng (1.8%), winter sampling wild simulated ginseng (1.6%) and autumn sampling wild simulated ginseng (0.6%). Therefore, the total saponin of spring sampling wild simulated ginseng was about 4.5 - 6.5 times higher than that of autumn sampling wild simulated ginseng regardless of cultivation period.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.939-944
• /
• 2001

Genetic algorithm is modelled on natural evolution and simulated annealing is based on the simulation of thermal annealing. Both genetic algorithm and simulated annealing are stochastic method. So they can find global optimum values. For compare efficiency of SA and GA's, some function value was maximized. In the result, that was a little better than GA's.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.34 no.2
• /
• pp.73-84
• /
• 1992

The TIDE, finite element model for the simulation of tidal flow in shallow sea was tested for its applicability at the Saemangeum area. Several pre and post processors were developed to facilitate handling of the complicated and large amount of input and output data for the model developed. Also an operation scheme to run the model and the processors were established. As a result of calibration test using the observed data collected at 9 points within the region, linearlized friction coefficients were adjusted to be ranged 0.0027~0.0072, and water depths below the mean sea level at every nodes were changed to be increased generally by 1 meter. Comparisons of tidal velocities between the observed and the simulated for the 5 stations were made and obtained the result that the average relative error between simulated and observed tidal velocities was 11% for the maximum velocities and 22% for the minimum, and the absolute errors were less than 0.2m/sec. Also it was found that the average R.M.S. error between the velocities of observed and simulated was 0.119 m/sec and the average correlation coefficient was 0.70 showing close agreement. Another comparison test was done to show the result that R.M.S. error between the simulated and the observed tidal elevations at the 4 stations was 0.476m in average and the correlation coefficients were ranged 0.96~0.99. Though the simulated tidal circulation pattern in the region was well agreed with the observed, the simulated tidal velocities and elevations for specific points showed some errors with the observed. It was thought that the errors mainly due to the characteristics of TIDE Model which was developed to solve only with the linearized scheme. Finally it was concluded that, to improve the simulation results by the model, a new attempt to develop a fully nonlinear model as well as further calibration and the more reasonable generation of finite element grid would be needed.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.10a
• /
• pp.127-132
• /
• 2003

In a today industry, the welding is doing a many portion in structure manufacture. This study is simulated heat of heat-effected zone and researched a mechanical properties and ultrasonic characteristic in used the SS400 and the STS304. As the result mechanical properties of steel that become drawing decreased because of remaining stress by strain gardening according as simulated heat temperature rises, but according as temperature rises in material that do simulated heat after have done annealing, mechanical propensity was improved. The velocity and attenuation become different by effect of remaining stress than effect of material internal microstructure in ultrasonic wave test. In the case of STS304, there was change in mechanical properties by effect that is by strain hardening, but there was no change in material that simulated heat after annealing. When become drawing in ultrasonic waves test, according as simulated heat temperatures rise, change of attenuation coefficient is looked, but material that simulated heat after annealing was no change almost both the volocity and attenuation.

• Journal of Korea Multimedia Society
• /
• v.21 no.10
• /
• pp.1171-1181
• /
• 2018

Most simulated shooting systems are TDM based method and dot type laser has been used. The proposed laser pattern based simulated shooting system is a new approach. It can distinguish shooters by calculating the angle of bar shaped laser pattern by each shooter. Unlike the existing TDM method, it is possible to distinguish shooters and lanes by patterns so that there is no time division restriction like TDM method. It is also possible to recognize overlapped impact points of laser patterns launched by multiple shooters. After the laser pattern based simulated shooting system was implemented, general shot and overlapped shot were tested for each lane. Through experiments, we confirmed the possibility of continuous shooting. In addition, it is possible to separate the pattern by each lane, and 100% recognition result was obtained even if impact points overlapped.

• Journal of Internet Computing and Services
• /
• v.11 no.1
• /
• pp.117-128
• /
• 2010

There are many researches related to a simulated shooting training system for replacing the real military and police shooting training. In this paper, we propose the point of impact from a simulated shooting target based on image processing instead of using a sensor based approach. The point of impact is extracted by analyzing the image extracted from the camera on the muzzle of a gun. The final shooting result is calculated by mapping the target and the coordinates of the point of impact. The recognition system is divided into recognizing the projection zone, extracting the point of impact on the projection zone, and calculating the shooting result from the point of impact. We find the vertices of the projection zone after converting the captured image to the binary image and extract the point of impact in it. We present the extracting process step by step and provide experiments to validate the results. The experiments show that exact vertices of the projection area and the point of impact are found and a conversion result for the final result is shown on the interface.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.9 no.2
• /
• pp.37-53
• /
• 2001

The Pilot Aptitude Research Equipment (PARE) at the Republic of Korea Air Force Academy had been installed to study the pilot aptitude of the cadets and the student pilots(Navy officers and Air Force officers from the pilot scholarship programs and the ROTC). The T-37 simulated flight program and procedure, and the automatic evaluated program for simulated flight have been orderly developed to use the PARE effectively. The cadets who entered started to get simulated flight training by using those developed programs. Their flight situation has been recorded by the automatic evaluated program whenever they got the training. And then the cadets who took part in the simulated flight started the elementary combat flight training in 1,999 after getting appointed to an office and finished the advanced combat flight training in 2,001. The study of the relationship between the simulated flight and the combat flight training has begun after finding their combat flight training results. The Logistic Discriminal Analysis, technique of the SAS statistical analysis package was used to study the pilot aptitude model through the simulated flight training. This study showed that it is possible to pre-estimate the result of the combat flight training using the PARE machine.

• Journal of Korean Society on Water Environment
• /
• v.25 no.4
• /
• pp.573-579
• /
• 2009

The performance of Rainfall-Runoff Forecasting System (RRFS), the watershed management model for the Geum river basin, is evaluated based on the agreement between the simulated and observed hydrographs and the behavioral characteristics of the flow-duration curves. As a result, the simulated hydrographs are well agreed with the observed ones except high flow discharges. It is inferred that most of the errors in the simulated hydrographs are due to the misestimation of agricultural water use in $2^{nd}$ quarter and the discrepancy of the peak discharges in $3^{rd}$ quarter. It is however judged that RRFS would give the reliable runoff hydrographs from the point of view of continuous model application. And simulated flow-duration curves and flow-duration coefficients are also similar to the observed ones except flood flow region. From the above result it is confirmed that the construction of Yongdam dam improves the state of flow-duration curve at the Gongjoo station.

• ETRI Journal
• /
• v.15 no.3
• /
• pp.1-26
• /
• 1994

Simulated annealing is an attractive, but expensive, heuristic method for approximating the solution to combinatorial optimization problems. Attempts to parallel simulated annealing, particularly on distributed memory multicomputers, are hampered by the algorithm's requirement of a globally consistent system state. In a multicomputer, maintaining the global state S involves explicit message traffic and is a critical performance bottleneck. To mitigate this bottleneck, it becomes necessary to amortize the overhead of these state updates over as many parallel state changes as possible. By using this technique, errors in the actual cost C(S) of a particular state S will be introduced into the annealing process. This paper places analytically derived bounds on this error in order to assure convergence to the correct optimal result. The resulting parallel simulated annealing algorithm dynamically changes the frequency of global updates as a function of the annealing control parameter, i.e. temperature. Implementation results on an Intel iPSC/2 are reported.