• Nuclear Engineering and Technology
• /
• v.56 no.10
• /
• pp.4207-4218
• /
• 2024

One of the essential requirements for molten salt reactor (MSR) design is methodology for analyzing multiphysics phenomena, such as the behavior of liquid fuel. In the research of Molten Salt Fast Reactors (MSFRs), the Neutron Diffusion Equation (NDE) is widely employed. This study introduces a method to enhance the accuracy of neutronic analysis of MSFR using the NDE. Using the simple structure of MSFR and the characteristics of liquid nuclear fuel, it is intended to enable the application of the simple equivalence method, which is difficult to perform on the existing fast reactor. A straightforward yet effective approach named the simplified Generalized Equivalence Theory (simplified GET) is proposed for applying flux-volume-weighted homogenized cross-sections and representative Discontinuity Factor (DF) values obtained at material. This approach, while similar to the General Equivalence Theory (GET) method, significantly simplifies the enhancement of accuracy in reactor analysis, minimizing computational efforts. Our investigation spans from the initial core to the burned core, ensuring the applicability of this simple method throughout the reactor's operational life. The proposed method demonstrates promising results, offering a viable solution to improve the accuracy of NDE-based calculations in MSFRs.

• Journal of the Korean Society of Industry Convergence
• /
• v.13 no.3
• /
• pp.169-181
• /
• 2010

This paper presents a feasibility study of a fresh air load reduction system by using an underground double floor space. The fresh air is introduced into the double slab space and passes through the opening bored into the footing beam. The air is cooled by the heat exchange with the inside surface of the double slab space in summer, and heated in winter. This system not only reduces sensible heat load of the fresh air by heat exchange with earth but also reduces latent heat load of the fresh air by ad/de-sorption of underground double slab concrete. In this paper, we proposed a simplified presumption method for the prediction of cooling and heating performance in the system. In conclusion the proposed method has been verified by comparing with the calculated value of the numerical analysis model by using nonlinear two-dimension hygroscopic question.

• Geomechanics and Engineering
• /
• v.5 no.6
• /
• pp.519-540
• /
• 2013

This paper presents an optimal design method for determining pile lengths of piled raft foundations. The foundation settlement is evaluated by taking into account the raft-pile-soil interaction. The analysis of settlement is simplified by using Steinbrenner's equation. Then the total pile length is minimized under the settlement constraint. An extended sequential linear programming technique combined with an adaptive step-length algorithm of pile lengths is used to solve the optimal design problem. The accuracy of the simplified settlement analysis method and the validity of the obtained optimal solution are investigated through the comparison with the actual measurement result in existing piled raft foundations.

• Ocean Systems Engineering
• /
• v.5 no.3
• /
• pp.221-243
• /
• 2015

This paper compares simplified and finite element method (FEM) models for tower and blade in dynamic coupled analysis of floating wind turbine. A SPAR type wind turbine with catenary mooring lines is considered in numerical analysis. Floating body equation is derived using boundary element method (BEM) and convolution. Equations for mooring line, tower and blade are formulated with theories of catenary, elastic beam and aerodynamic rotating beam, respectively and FEM is applied in the formulation. By combining the equations, coupled solutions are calculated. Tower or blade may be assumed rigid or lumped body for simplicity in modeling. By comparing floating body motions, mooring line tensions and tower stresses with the simple model and original FEM model, the effect of including or neglecting elastic, rotating and aerodynamic behavior of tower and blade is discussed.

• Geomechanics and Engineering
• /
• v.15 no.4
• /
• pp.947-955
• /
• 2018

In this study, we propose a three-dimensional simplified slope stability analysis using a hybrid-type penalty method (HPM). In this method, a solid element obtained by the HPM is applied to a column that divides the slope into a lattice. Therefore, it can obtain a safety factor in the same way as simplified methods on the slip surface. Furthermore, it can obtain results (displacement and strain) that cannot be obtained by conventional limit equilibrium methods such as the Hovland method. The continuity condition of displacement between adjacent columns and between elements for each depth is considered to incorporate a penalty function and the relative displacement. For a slip surface between the bottom surface and the boundary condition to express the slip of slope, we introduce a penalty function based on the Mohr-Coulomb failure criterion. To compute the state of the slip surface, an r-min method is used in the load incremental method. Using the result of the simple three-dimensional slope stability analysis, we obtain a safety factor that is the same as the conventional method. Furthermore, the movement of the slope was calculated quantitatively and qualitatively because the displacement and strain of each element are obtained.

• Journal of Soil and Groundwater Environment
• /
• v.24 no.4
• /
• pp.11-19
• /
• 2019

This paper examines an assessment method for terminating the post-closure maintenance of a landfill using a simplified landfill gas model. The case study site is the Sudokwon Landfill in Incheon city, which was closed in 2000. The deviations of the results obtained by the regular model and the simplified model were both slightly over 10% from the measured data. Also, the deviation of the simplified model from the regular model has been less than 5% since 2005. Thus, the simplified model could be applied to other landfills that have been closed for at least 5 years. Additionally, the results of the mass balance analysis using the simplified landfill gas model indicated that 39% of the organic carbon was discharged, leading to organic carbon and organic matter content of 7.2 and 17.6%, respectively, in the landfill by the end of 2018.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.33 no.3
• /
• pp.93-100
• /
• 2021

Since the IB (Immersed Boundary) method, which can perform coupling analysis with objects and fluids having an impermeable boundary of arbitrary shape on a fixed grid system, has been developed, the IB method in various CFD models is increasing. The representative IB methods are the directing-forcing method and the ghost cell method. The directing-forcing type method numerically satisfies the boundary condition from the fluid force calculated at the boundary surface of the structure, and the ghost-cell type method is a computational method that satisfies the boundary condition through interpolation by placing a virtual cell inside the obstacle. These IB methods have a disadvantage in that the computational algorithm is complex. In this study, the simplified immersed boundary (SIB) method enables the analysis of temporary structures on a fixed grid system and is easy to expand to three proposed dimensions. The SIB method proposed in this study is based on a one-field model for immiscible two-phase fluid that assumes that the density function of each phase moves with the center of local mass. In addition, the volume-weighted average method using the density function of the solid was applied to handle moving solid structures, and the CIP method was applied to the advection calculation to prevent numerical diffusion. To examine the analysis performance of the proposed SIB method, a numerical simulation was performed on an object falling to the free water surface. The numerical analysis result reproduced the object falling to the free water surface well.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.1
• /
• pp.45-49
• /
• 2014

Torque of an induction motor is generally calculated by simplified equivalent circuit. However, the torque has an error since it is calculated by simplified equivalent circuit. In this paper, stator and rotor currents, torque, efficiency, and power factor are derived from the equivalent circuit of an induction motor using mesh analysis method. Then, they are compared with those calculated from simplified equivalent circuit.

• Industrial Engineering and Management Systems
• /
• v.4 no.2
• /
• pp.192-197
• /
• 2005

Among many amplitude parameters, Kurtosis (4-th normalized moment of probability density function) is recognized to be the sensitive good parameter for machine diagnosis. Kurtosis has a value of 3.0 under normal condition and the value generally goes up as the deterioration proceeds. In this paper, simplified calculation method of kurtosis is introduced for the analysis of impact vibration with one sided affiliated impact vibration which occurs towards the progress of time. That phenomenon is often watched in the failure of such as bearings’ outer race. One sided affiliated impact vibration is approximated by one sided triangle towards the progress of time and simplified calculation method is introduced. Varying the shape of one sided triangle, various models are examined and it is proved that new index is a sensitive good index for machine failure diagnosis. Utilizing this method, the behavior of kurtosis is forecasted and analyzed while watching machine condition and correct diagnosis is executed.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.175-176
• /
• 2010

Current Bridge Specification for Highway Bridges adopts a simplified method to determine sectional forces of abutment wing by diving its area into four sections. This simplified method was developed when numerical analysis was not mature and computer resources were expensive. It has been criticized that the simplified method produces conservative results. This study evaluates the problem of current design practice to improve the design guideline for abutment wing.