• Management & Information Systems Review
• /
• v.32 no.1
• /
• pp.173-194
• /
• 2013

The purpose of this study drew the core elements of ISO26000 by analyzing the elements suitable to the characteristics of casino companies, and examined the influence of the core elements of ISO26000 on organizational trust following the level of organizational trust of employees. As a result of the factor analysis, among the 7 measurement items of ISO26000, improvement of governance and fair operating practices were simplified into one factor and thus 6 factors were used for empirical analysis. Therefore, multiple regression analysis using least square method was conducted to examine the impacts of the 6 elements. As a result, 5 variables excluding human rights had significant impacts on the organizational trust. Concretely, the 5 core elements of ISO26000 (labor practices, governance and fair operation, consumer issues, environment and community social and economic development) had significant impact on organization trust in order. In addition, the results of quantile regression analysis show the core elements of ISO26000 had different impacts on organizational trust depending on the level of organizational trust of employees.

• Tuberculosis and Respiratory Diseases
• /
• v.40 no.5
• /
• pp.532-539
• /
• 1993

Background: Physician's estimates of patient survival often influence clinical decisions, especially those near the end of life. In addition. clinical decisions frequently reflect trade-offs between morbidity and length of survival. As a result, accurate estimates of survival can be extremely useful in clinical decision. When the episode of acute respiratory failure in chronic obstructive lung disease, evaluation of the severity of the condition and short term prognosis is difficulit based on the available clinical or paraclinical data at the time of admission. Method: In this study, we performed a retrospective study in Chung Ang University Hospital, 74 patients (51 males, 23 females), who were hospitalized with chronic obstructive lung disease with acute respiratory failure from 1980 to 1992. We evaluated these patients to determine lung prognostic factors at time of admission in the Intensive Care Unit (ICU) that predict short term survival, and to determine the possible application of the Simplified Acute Phsiology Score (SAPS) to this population, All patients were treated with similar regimen during the hospitalization. Results: The results were as follows: 1) Hospital mortality was 34%(25/74 patients) and surival rate was 66%(49/74 patients) in COPD with acute respiratory failure. The prognosis of the older age was much poorer than those of the young age. 2) There was no difference in mortality according to the results of basal pulmonary test and arterial blood gas analysis. 3) The SAPS at admission was higher in those patients who expired(10.8) than the survived(6.5), and there was positive correlation between SAPS and mortality (r=0.91, p<0.05). 4) Prognostic factors in acute respiratory failure complicating COPD which were identifiable at time of admission to the ICU were as follows: cachexia, encephalopathy, serum creatinine and phosphate. Conclusion: In conclusion, the SAPS might have a good prognostic value for determination of short term survival among chronic obstructive lung disease with acute respiratory failure.

• Journal of Genetic Medicine
• /
• v.5 no.1
• /
• pp.41-46
• /
• 2008

Purpose : Fragile X syndrome (FXS) is the most common heritable cause of cognitive impairment. FXS is caused by hyperexpansion and hypermethylation of a polymorphic CGG trinucleotide repeat in the 5' untranslated region of the fragile X mental retadation-1(FMR1) gene. Combination of Southern blotting and simple polymerase chain reaction(PCR) amplification of the FMR1 repeat region is commonly used for diagnosis in females. To give a definite diagnosis in a female child suspected of having FXS, we carried out the molecular diagnostic test for FXS using the recently developed Abbott Molecular Fragile X PCR Kit. Methods : The PCR amplification of the FMR1 repeat region was performed using the Abbott Mdecular Fragile X PCR Kit. The amplified products were analyzed by size-separate analysis on 1.5% agarose gels and by DNA fragment analysis using Gene scan. Results : Agarose gel and Gene scan analyses of PCR products of the FMR1 repeat region showed that the patient had two heterozygous alleles with a normal 30 repeats and full mutation of >200 repeats whereas her mother had two heterozygous alleles with the normal 30 repeats and premutation of 108 repeats, suggesting that the premutation of 108 repeats in her mother may have led to the full mutation of >200 repeats in the patient. Conclusion : We diagnosed FXS in a female patient using a simplified molecular diagnostic test. This commercially available diagnostic test for FXS, based on PCR, may be a suitable alternative or complement method to Southern blot analysis and PCR analysis and/or methylation specific(MS)-PCR analysis for the molecular diagnosis of FXS in both males and females.

• Korean Journal of Construction Engineering and Management
• /
• v.24 no.1
• /
• pp.12-20
• /
• 2023

To calculate the amount of owner-caused and contractor-caused delays based on a simplified delay analysis, which has been customarily used in Korea, has a limitation in reflecting the impact of the concurrent delay and the acceleration work. It also resulted in the apportionment of liquidated damages by applying the ratio of the number of delays between the owner and the contractor. This study analyzes that the conventional method does not meet the international standards. In order to improve the problem of construction delay analysis and the apportionment of liquidated damages based on it, owner delays, contractor delays, concurrent delays, and the impact of acceleration should be analyzed together. This study suggests that in the apportionment of liquidated damages, the extension of time should be extended by the sum of concurrent delays and the owner-caused delays, and liquidated damages should be imposed on delays incurred after the extension of time. It can be seen that it conforms to the international standards. The results of this study are expected to contribute to improving the problems of delay analysis and liquidated damages calculation, which have been conventionally accepted.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.12 no.1
• /
• pp.14-21
• /
• 2014

Purpose: The objective of this study was to develop a new scoring tool that is comprehensively applicable and predicts fatality within 24 h of intoxication. Methods: This was a cohort study conducted in two emergency medical centers from 2011 to 2012. We identified factors associated with severe/fatality. Through a discriminant analysis, we devised the aBIG (age, Base deficit, Infection, and Glasgow coma scale) score. To compare the ability of aBIG to predict intoxication severity with that of previous scoring systems such as APACHE II, MODS, SAPS IIe, and SOFA, we determined the receiver operating characteristic curves of each variable in predicting severe-to-fatal toxicity. Results: Compared with the mild/moderate toxicity group (n=211), the severe/fatal group (n=143) had higher incidences of metabolic acidosis, infection, serious mental change, QTc prolongation and hepato-renal failure. Age, base deficit, infection-WBC count, and Glasgow Coma Scale were independently associated with severe/fatal poisoning. These variables were combined into the poisoning "aBIG" score [$0.28{\times}$Age group+$0.38{\times}WBC$ count/$10^3+0.52{\times}$Base deficit+$0.64{\times}$(15-GCS)], which were each calculated to have an area under the curve of 0.904 (95% confidence interval: 0.868-0.933). The aBIG poisoning score had an equivalent level of severity predictability as APACHE II and a superior than MODS, SOFA, and SAPS IIe. Conclusion: We developed a simplified scoring system using the four variables of age, base deficit, infected leukocytosis, and GCS. The poisoning aBIG score was a simple method that could be performed rapidly on admission to evaluate severity of illness and predict fatal severity in patients with acute intoxications.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.1
• /
• pp.107-115
• /
• 2014

The reduced-bit transform based bit-plane matching algorithm (BPM) can obtain the block matching result through its simple calculation and hardware design compared to the conventional block matching algorithms (BMAs), but the block matching accuracy of BPMs is somewhat low. In this paper, reduced-bit transform based sum of the absolute difference (R-SAD) is proposed to improve the block matching accuracy in comparison with the conventional BPMs and it is shown that the matching process can be obtained using the logical operations. Firstly, this method transforms the current and the reference images into their respective 2-bit images and then a truth table is obtained from the relation between input and output 2-bit images. Next, a truth table is simplified by Karnaugh map and the absolute difference is calculated by using simple logical operations. Finally, the simulation results show that the proposed R-SAD can obtain higher accuracy in block matching results compared to the conventional BPMs through the PSNR analysis in the motion compensation experiments.

• Smart Structures and Systems
• /
• v.20 no.3
• /
• pp.311-328
• /
• 2017

The characteristics of boundary layers have significant effects on the aerodynamic forces and vibration of the wind turbine blade. The incorporation of active trailing edge flaps (ATEF) into wind turbine blades has been proven as an effective control approach for alleviation of load and vibration. This paper is aimed at investigating the effects of external trailing edge flaps on the flow pattern and velocity distribution within a boundary layer of a NREL 5MW reference wind turbine, as well as designing a new type of velocity sensors for future validation measurements. An aeroelastic-aerodynamic simulation with FAST-AeroDyn code was conducted on the entire wind turbine structure and the modifications were made on turbine blade sections with ATEF. The results of aeroelastic-aerodynamic simulations were combined with the results of two-dimensional computational fluid dynamic simulations. From these, the velocity profile of the boundary layer as well as the thickness variation with time under the influence of a simplified load case was calculated for four different blade-flap combinations (without flap, with $-5^{\circ}$, $0^{\circ}$, and $+5^{\circ}$ flap). In conjunction with the computational modeling of the characteristics of boundary layers, a bio-inspired hair flow sensor was designed for sensing the boundary flow field surrounding the turbine blades, which ultimately aims to provide real time data to design the control scheme of the flap structure. The sensor element design and performance were analyzed using both theoretical model and finite element method. A prototype sensor element with desired bio-mimicry responses was fabricated and validated, which will be further refined for integration with the turbine blade structures.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.6
• /
• pp.88-95
• /
• 2020

Currently, Fiber-Reinforced Plastic (FRP) composite materials are used in many industrial fields, owing to their superior stiffness and specific strength compared to metals. However, there are issues with FRP inefficiency, due to low productivity of such materials, environmental problems they pose and long curing times needed. Trying to address these issues, research was conducted towards the development of a FRP composite material with excellent properties and short production time, introducing a curing method using a UV lamp. Four types of composite materials were prepared, cured with catalyst or UV (CZ: Catalyst + ZNT 6345, CR: Catalyst + RF 1001 MV, UVZ: Photoinitiator + ZNT 6345, and UVR: Photoinitiator + RF 1001 MV). Examination of the chemical and mechanical properties of these composites showed that UV-cured materials performed better than the catalyst-cured ones. These results indicate that the production process of FRP composite materials can be simplified by using a UV lamp for curing, resulting in composite materials with the same quality, but reduced production time by about 70% compared to currently used practices. This advancement will contribute greatly to the composite material industry.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.3
• /
• pp.230-238
• /
• 2017

Carbonation is a representative deterioration for underground structure, which causes additional repair for service life. This study proposes a simplified equation for optimum repair timing without complicated probability calculation, considering initial and repair conditions For the work, initial service life, extended service life through repair, and their COVs(Coefficient of Variation) are considered, and the periods which can reduce number of repair are evaluated. Assuming the two service lives to be independent, the repair timings are derived from 10 to 50 years based on the probabilistic method, and the regression analysis technique for optimum repairing timing is proposed. Decreasing COV has insignificant effect on reducing repairing number but shows a governing effect on changes in probability near the critical repairing stage. The extension of service life through repairing is evaluated to be a critical parameter for reducing repairing number. The proposed technique can be efficiently used for maintenance strategy with actual COV of initial and additional service life due to repairing.

• Environmental Analysis Health and Toxicology
• /
• v.16 no.4
• /
• pp.223-226
• /
• 2001

Acetanilide is a High Production Volume Chemical, which is produced about 2,300 tons/year in Korea as of 1998 survey. Most is used as an intermediate for synthesis of pharmaceuticals and dyes. The chemical is one of seven chemicals, which are under the frame of OECD SIDS program sponsored by National Institute of Environmental Research of Korea. Regarding the information on the environmental fate. bioconcentration is one of important factor to estimate the environmental tranfer. However, measurement of bioconcentration needs high expense and time. For this reason, OECD recommends to use BCFWIN model to estimate bioconcentration of organic chemicals, BCFWIN estimates the bioconcentration factor (BCF) of an organic compound using the log octanol-water partition coefficient (Kow) of the compound. Structures are entered into BCFWIN through SMITES (Simplified Molecular Input Line Entry System) notations. The BCFWIN method classifies a compound as either ionic or non-ionic. ionic compounds include carboxylic acids, sulfonic acids and salts of sulfonic acids, and charged nitrogen compounds (nitrogen with a + 5 valence such as quaternary ammonium compounds). All other compounds are classified as non-ionic. In this study, bioaccumulation of acetanilide was estimated using BCFWIN model based on SMIIES notation, chemical name data and partition coefficient as one of environmental fate/distribution of the chemical elements.