• International Journal of Highway Engineering
• /
• v.12 no.4
• /
• pp.39-46
• /
• 2010

In 2007, Iowa department of transportation (DOT) initiated to run the falling weight deflectometer (FWD) network-level testing along Iowa highway and road systems and to build a comprehensive database of deflection data and subsequent structural analysis, which are used for detecting pavement structure failure, estimating expected life, and calculating overlay requirements over a desired design life. Iowa's current FWD networklevel testing protocol requires that pavements are tested at three-drop level with 8-deflection basin collected at each drop level. The test point is determined by the length of the tested pavement section. However, the current FWD network-level program could cover about 20% of Iowa's highway and road systems annually. Therefore, the current FWD network-level test protocol should be simplified to test more than 20% of Iowa's highway and road systems for the network-level test annually. The main objective of this research is to investigate if the minimum number of drop levels and test points could be reduced to increase the testing production rate and reduce the cost of testing and traffic control without sacrificing the quality of the FWD data. Based upon the limited FWD network-level test data of eighty-three composite pavement sections, there was no significant difference between the mean values of three different response parameters when the number of drop levels and test points were reduced from the current FWD network-level testing protocol. As a result, the production rate of FWD tests would increase and the cost of testing and traffic control would be decreased without sacrificing the quality of the FWD data.

• Journal of Energy Engineering
• /
• v.13 no.1
• /
• pp.51-59
• /
• 2004

The NSSS (Nuclear Steam Supply System) thermal-hydraulic programs adopted in the domestic full-scope power plant simulators were provided in early 1980s by foreign vendors. Because of limited compulsational capability at that time, they usually used very simplified physical models for a real-time simulation of NSSS thermal-hydraulic transients, which entails inaccurate results and, thus, the possibility of so-called "negative training", especially for complicated two-phase flows in the reactor coolant system. In resolve the problem, KEPRI developed a realistic NSSS T/H program ARTS which was based on the RETRAN-3D code for the improvement of the Nuclear Power Plant full-scope simulator. The ARTS (based on the RETRAN-3D code) guarantees the real-time calculations of almost all transients and ensures the robustness of simulations. However, there is some possibility of failing to calculate in the case of large break loss of coolant accident (LBLOCA) and low-pressure low-flow transient. In this case, the backup calculation system cover automatically the ARTS. The backup calculation system was expected to provide substantially more accurate predictions in the analysis of the system transients involving LBLOCA. The results were reasonable in terms of accuracy, real-time simulation, robustness and education of operators, complying with FSAR and the AMSI/ANS-3.5-1998 simulator software performance criteria.

• The Journal of Internal Korean Medicine
• /
• v.32 no.1
• /
• pp.87-99
• /
• 2011

In the 18th century, Xu Lingtai (徐靈胎) and Yoshimasu Todo (吉益東洞) were medical revolutionaries. They emphasized researches about synthesis of formulae, efficacy of medication and observation and then classification of clinical phenomena, so they assumed a modern scientific character. But, there were clear differences between their academic thoughts. In this paper, we examine the causes of difference in three fields, i.e. traditional culture, viewpoints of talented people and academic personality. The first, difference was due to traditional culture. Chinese medicine has a long history and heavy traditional culture. Yin-Yang (陰陽) theory, Five Phase(五行) theory, Viscera and Bowels (臟腑) theory and Meridian and Collateral (經絡) theory stemmed from everyday practice, and Chinese people learn these theories from experience and observation. From the standpoint of Chinese people, particularly scholarly doctors [儒醫] such as Xu Lingtai, it was easy to debate medical theories. In contrast, Japanese traditional culture didn't have as long a history as China. Thus as a necessity, it was harder to disseminate traditional Chinese medicine theories in Japan. Yoshimasu Todo simplified it by cutting out the superfluous traditional Chinese medicine theory, so at that time it must have been shocking to the Japanese medical world's trends. The second, difference was due to viewpoints of talented experts. From the standpoint of Xu Lingtai, above all, medicine is just a learning, only a kind of technique, even more not a means of living. Xu Lingtai was concerned with the appearance of very talented experts such as 'great man' (偉人), and 'exceptional man' (奇士) who carried out medical research. Instead of cultivating a few talented people, Yoshimasu Todo tried to produce a large number of clinicians quickly who could treat ordinary people. The third was due to personality difference. As Xu Lingtai threw away Confucianism and studied medicine in his youth, although he had a critical attitude, he was always mild-mannered. Yoshimasu Todo always had a clearly critical and rebellious nature. Personality influenced their literary spirit and learning style, so although both advocated reactionism, the academic thought of Xu Lingtai was reformative and mild, while that of Yoshimasu Todo was revolutionary and fierce. Xu Lingtai and Yoshimasu Todo had considerably similar research domains and academic thought, so it is proper for them both to serve as examples for making a comparative study of medical history in China and Japan in 18th century.

• Archives of design research
• /
• v.19 no.5 s.67
• /
• pp.313-322
• /
• 2006

Among many modelling factors which consist of a screen, a form brings a child's psychological response, according to its being drawn and expressed shape, and would be defined as a visual descriptive method which transmits the relation between the subject and background by a story content and the circumstance and emotion of characters in the story. In this study, to analyze how an expressed form on a screen works to a child visually and psychologically, I, first have examined how differently a child's perception development and its experience to the form is come out by the age of a child, and have found that it influences on a child's originality and creativity development, visual and psychological thinking development, and the stimulation on dream and imagination. And I have examined each characteristic by discriminating the expressive style of the form into a reproductive, a simplified, an exaggerated and a distorted form expression, and by utilizing it as substantiative data through the 1st and 2nd stage, have analyzed responses and preferences according to a style of a child's expression form. In conclusion, I have considered that the analysis result through the substantiative study would be a help not only to the form expression which is based on an illustrator's personality and creativity, and also would be utilized in the effective expression method study and experiment of students who learns the illustration.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.5
• /
• pp.516-522
• /
• 2020

Water trees can cause considerable damage to the performance of underground cables. Theymay formwithin the dielectric used in buried or water-immersed high voltage cables. They grow in a bush-like or tree-like form, often taking decades before causing damage to a cable's performance. They are usually found on very old underground cables, often in an inaccessible place. It is costly and time-consuming to detect watertrees in underground cables. Tree detection technology, including mathematical modeling,can reduce the maintenance cost and time necessary for detecting these trees.To simulate detection of water trees in this study, a mathematical model ofan XLPE cable and a water tree were developed. The complex water tree structure was simplified, based on two identified patterns of aventedtree. A Matlab simulation was performed to calculate and analyze the capacitance and resistance of a cable insulation layer,based on growth of a watertree. Capacitance size increased about 0.025×10^-13[Farads/mm] compared to normal when the tree area of the cable was advanced to 95% of the insulation layer. The resistance value decreased by about 0.5×10¹⁶[ohm/m]. These changesand changesshowninaBurkes paper physical modeling simulation are similar.The value of mathematical modeling for detecting water trees and damage to underground cables has been demonstrated.

• Journal of Korean Library and Information Science Society
• /
• v.20
• /
• pp.351-381
• /
• 1993

The purpose of this study is to analyze the various processes and patterns to build or synthesize class numbers in the 800 class of the Dewey Decimal Classification, Edition 20(1989). The results of the analysis are as follows: 1. The 800(Literature and rhetoric) class in the DDC system is the main class added analytico-synthetic principle positively to an enumerative scheme. 2. The facets to be a n.0, pplied in literature are language literary form literary period ; kind, scope, or medium ; notation 08(collection) or 09(criticism) literary feature, subject, author, etc. 3. In the 800 class, there are the five tables of precedence for literary forms aspects ; specific kinds of persons ; literary, period in relation to the aspects for works treating more than one literary form subforms, aspects and literary periods in the works treating a specific literary form. 4. The basic number synthesis of literary works proceeds through the various facets in the following sequence, as far as necessary for the item : base no. + literary form + literary time or period + kind, scope, or medium + notation 08 or 09 + subform + additional notation from T3C and other tables. 5. In view of the multiplicity of facets, their synthesis formulas take the following order : (1) Works about the literature : base no.(schedule) + language(T6) or form(T3B) (2) Works by or about individual author : base no.(schedule) + form (T3A) + period(schedule) + subform(T3A) (3) Works by or about more than one author, not restricted by language facet : base no.(schedule) + period(T1) ; base no.(schedule) + kind, scope, medium(T3B), or feature(T3C), or person(T5). (4) Works by or about more than one author, restricted by language facet : base no.(schedule) + form (T3B) + period(schedule) + subform(T3B) + notation 08 or 09(T3B) ; base no.(schedule) + notation 08 or 09(T3B) + 9(T3C) + area notation(T2) : base no.(schedule) + form (T3B) + notation 008 or 009(T3B) : base no.(schedule) + form (T3B) + kind, scope, medium(T3B) + notation 08 or 09(T3B) + period(schedule). (5) Affiliated literatures for which period numbers are not us base no.(schedule) + form (T3A or T3B), or notation 08 or 09(T3B) : base no.(schedule) + kind, scope, medium(T3B), feature(T3C), or person(T5) 6. The problems in the number building of the 800 class are the complexity and difficulty of number synthesis, the intrinsic weakness of from distinction and the inconvenience of retrieval inherent in the form class. In order to solve these problems, therefore, the citation orders and methods of DDC should be improved and synthesis patterns simplified from the point of view of its applicability and its usefulness in the "literature class".

• Journal of Korean Society of Steel Construction
• /
• v.28 no.3
• /
• pp.195-202
• /
• 2016

In this study, it is carried out to analyze the international design standards such as Eurocode 8, API 650, NZSEE and etc for the seismic design of steel liquid storage tanks. From the comparison and analysis, the data for the required parameters and factors are provided for the establishment of Korean seismic design standard for steel liquid storage tanks. The simplified mechanical models have been presented for the seismic design of steel liquid storage tanks in all design standards and the parameters of mechanical models in design standards have similar values. Although the models for the seismic design of steel liquid storage tanks are similar in design standards, design approaches are given differently in accordance with the design methods, allowable stress design or limit state design. Therefore it is not easy to compare seismic forces presented in design standards directly. After comparison of design standards, it is concluded that establishment of Korean design standard for the seismic design of steel liquid storage tanks is necessary.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.2 no.4
• /
• pp.1-10
• /
• 2011

This study investigates the performance of composite (steel-concrete) frame structures through numerical experiments on individual connections. The innovative aspects of this research are in the use of connections between steel beams and concrete-filled tube (CFT)columns that utilize a combination of low-carbon steel and shape memory alloy (SMA) components. In these new connections, the intent is to utilize the recentering provided by super-elastic shape memory alloy tension bars to reduce building damage and residual drift after a major earthquake. The low-carbon steel components provide excellent energy dissipation. The analysis and design of these structures is complicated because the connections cannot be modeled as being simply pins or full fixity ones they are partial restraint (PR). A refined finite element (FE) model with sophisticated three dimensional (3D) solid elements was developed to conduct numerical experiments on PR-CFT joints to obtain the global behavior of the connection. Based on behavioral information obtained from these FE tests, simplified connection models were formulated by using joint elements with spring components. The behavior of entire frames under cyclic loads was conducted and compared with the monotonic behavior obtained from the 3D FE simulations. Good agreement was found between the simple and sophisticated models, verifying the robustness of the approach.

• Journal of Cadastre & Land InformatiX
• /
• v.47 no.1
• /
• pp.111-126
• /
• 2017

Small-scale UAS(Fusion technique of Unmanned Aerial Vehicles platform and Sensors, 'sUAS') opens various new applications in construction fields and so becoming progressively common due to the considerable potentials in terms of accuracy, costs and abilities. The purpose of this study is that the investigation of the validation on the utilization of sUAS for earth stockpile volume calculations on sites. For this, generate 3D models(DSM) with sUAS aerial images on an cone shaped soil stockpile approximately $270m{\times}300m{\times}20m$, which located at Baegot Life Park in Siheung-si, compared stockpile volume estimates produced by sUAS image analysis, against volume estimates obtained by GNSS Network-RTK ground surveying method which selected as the criteria of earth stockpile volume. The result through comparison and examination show(demonstrate) that there was under 2% difference between the volume calculated with the GNSS Network RTK data and the sUAV data, especially sUAS imaged-based volume estimate of a stockpile can be greatly simplified, done quickly, and very cost effective over conventional terrestrial survey methods. Therefore, with consideration of various plan to assess the height of vegetation, sUAS image-based application expected very useful both volume estimate and 3D geospatial information extraction in small and medium-sized sites.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.3
• /
• pp.285-292
• /
• 2016

In this study, FE-BE direct coupling methods of 1D and 2D problems are considered for the pontoon-type floating structure and the difference of the modeling dimensions is investigated for the hydroelastic response. The modeling dimensions are defined as the 1D problem consisting 1D beam-2D fluid coupling and the 2D problem consisting 2D plate-3D fluid coupling with zero-draft assumption. For case studies, hydroelastic responses of the 1D Problem are compared to those of the 2D Problem for a wide range of aspect ratio and regular waves. It is shown that the effects of the elastic behavior are increased by decreasing the incident wavelength, whereas the effects of the rigid behavior are increased by increasing the incident wavelength. In 2D problem, the incident wave angle can be considered, and slightly more accurate results can be obtained, but the computational efficiency is lower. On the other hand, in 1D problem with plate-strip condition, the incident wave angle cannot be considered, but when the aspect ratio is large, the overall responses can be analyzed through a simplified model, and the computational efficiency can be improved.