• 한국전산구조공학회논문집
• /
• 제29권6호
• /
• pp.583-590
• /
• 2016

본 논문은 강형식 기반의 MLS 차분법에 Rayleigh 감쇠효과를 적용한 동적균열진전 해석기법을 제시한다. Rayleigh 감쇠 효과가 반영된 동적 평형방정식과 구성방정식을 도출하고, MLS 미분근사식을 이용하여 지배방정식들을 이산화하였다. 평형방정식뿐만 아니라 구성방정식에서도 감쇠효과를 적절하게 고려하여 기존의 무요소 강정식화 기법에서 고려하지 못했던 비례감쇠 알고리즘을 구현하였다. 시간관련 항을 포함한 동적 평형방정식은 중앙차분법(central difference method)을 이용하여 시간적분 하였고, 속도에 대한 차분식을 lagging시켜 이산화 방정식을 간소화시켰다. 균열의 기하학적 특성은 표면력 '0'인 자연경계 조건을 균열면에 놓인 절점들에 부과하여 묘사하였으며, 균열성장으로 인해 해석단계마다 변하는 절점의 생성 및 이동 효과를 계방정식 구성에 반영하였다. 단일균열과 다중균열을 갖는 수치예제를 통해서 제안된 수치기법의 정확성을 검증하였으며, 비례감쇠 효과의 고려가 동적균열진전 해석결과에 미치는 영향을 보였다.

• 대한토목학회논문집
• /
• 제33권2호
• /
• pp.443-453
• /
• 2013

하이브리드 실험은 수치해석 모형과 물리적 부분구조 모형사이의 상호작용을 통하여 구조물의 거동을 예측하는 실험법이다. 본 연구에서는 지진하중 재하 시 1경간 2층 강 뼈대 구조물에 대한 다자유도 하이브리드 실험을 수행하고 유효성을 확보하는데 그 목적이 있다. 이를 위해 전용 하이브리드 수치해석 프로그램인 FEAPH을 개발하였으며, 최적화된 시스템을 구축하였다. FEAPH은 고정 반복법(Fixed iteration)과 병렬화(Parallelization) 기법을 적용하여 순차적 해석에서 발생되는 비효율적 연산을 개선하였다. 또한, 종전에 데이터 통신과 부분구조물과 해석프로그램간의 인터페이스를 간략화하여 하이브리드 시스템 구성을 최적화 하였다. 그 결과, 입력 가진시간(30초) 대비 약 10%의 실험시간이 소요되었다. 시스템의 신뢰성을 검증하고 선형실험과 강 뼈대 구조물의 동적거동을 예측하기 위해 비선형 실험을 수행하였으며 수치해석과의 변위응답이력은 거의 일치 하였다. 그러나 최대변위에 대한 응답은 다소 차이를 보였으며, 이는 재료 비선형성에 대한 해석상의 오차와 영구변형에 의해 발생한 것으로 판단된다. 따라서 적절한 재료 비선형 모델과 알고리즘의 개선이 이루어지면, 실시간 하이브리드 시스템은 구조물의 동적거동을 예측하는데 유용하게 활용될 것이며, 추후 진동대 실험을 대체할 수 있는 효과적인 실험 방법이 될 것으로 판단된다.

• The Korean Journal of Ecology
• /
• 제21권5_3호
• /
• pp.713-721
• /
• 1998

The effects of artificial interference on the vegetation landscape in Mt. Nam of Seoul, Korea were clarified by analysing the distribution of vegetation landscape element and the number and size of patch depicted as a vegetation map in terms of landscape ecological principles. The effects of artificial interference on vegetation were also confirmed from the environmental gradient analysis on plant community extended from the lowland to the peak of that mountain. Vegetation landscape elements were divided into plantation and secondary forest in actual vegtation map. The ratio of plantation to secondary forest was higher in the lowland below mid-slope and the southern slope. Most afforested land were occupied by Robinia pseudoacacia and Populus tomentoglandulosa, Pinus rigida, P. koraiensis, Metasequoia glyptostroboides, Alnus hirsuta and so on are localy planted. In addition, projects to replace those afforested trees by P. densiflora as a kind of campaign for "Restoration of the one original feature of Mt. Nam" or to replace those tree species by planting young Abies holophylla or P. koraiensis under the mature afforested trees are also carried out in recent years. In cases of secondary forest, the southern slope was dominated by P. densiflora and the northern one by Q. mongolica. But the lowland of the northern slope is dominated by P. densiflora as the same as that in the southern slope. Vegetation landscape elements in Mt. Nam were much simplified comparing with that of suburban area around Seoul. The number of patches, which reflects the degree of diverse artificial interference was more in the lower area than in the upper area and more in the southern slope than in the northern one. On the other hand, the size of patch showed the antagonistic tendency to that of the number of patch. As a result of environmental gradient analysis, vegetation distribution in Mt. Nam was different from that in suburban area around Seoul. For example, Alnus japonica community, Zelkova serrata community, and Carpinus laxiflora community, which is established in mountain comparatively rare in artificial interference disappeared in Mt. Nam. As a result of analysis on vegetational succession in P. densiflora community and Q. mongolica community, both communities showed a tendency of retrogressive succession differently from that in control site located in suburban area around Seoul. In addition, species composition of P. densiflora and Q. mongolica communities in Mt. Nam were also different from those in Mt. Surak located around Seoul. It was interpreted that those results were originated from the environmental pollution and excessive arti ficial interferences.rferences.

• 해양환경안전학회지
• /
• 제27권6호
• /
• pp.846-855
• /
• 2021

최근 친환경, 신재생 에너지 수요에 따라서 해상풍력발전 분야는 빠른 성장세와 설비의 대형화에 따른 전용설치선박의 관련 기술개발이 요구되고 있다. 해상풍력설치선박(WTIV: Wind Turbine Installation Vessel)은 설치 작업 시 선체를 파도의 영향을 받지 않는 높이로 이동시키고 모든 환경하중은 레그가 담당한다. 특히 파랑하중은 불규칙파로 구성되어 있기 때문에, 정확한 동적응답특성을 파악하는 것은 아주 중요한 문제이다. 이러한 동적응답해석은 간이법의 하나인 단자유도법을 널리 활용하고 있으나, 불규칙 파를 고려하지 못하는 제약조건이 있다. 따라서 현재 설계 시 불규칙 파에 대한 시간영역 계산이 가능한 다자유도 계산법을 사용하고 있다. 그러나 다자유도 계산법에서 시간영역 해석은 정도 높은 계산 결과를 제공하지만, 데이터의 수렴도가 민감하고 복잡성에 있어 설계 시 어려움이 있다. 따라서 본 논문은 다양한 변수를 기준으로 한 시간영역 해석을 통하여 불규칙 파의 동적응답 특성을 표현 할 수 있는 동적증폭계수 추정식을 개발하였다. 기존 다자유도 모델 대비 계산시간 단축 및 정확도 확보를 확인하였다. 개발된 동적증폭계수 추정식은 WTIV 및 유사 구조물 설계에 활용이 가능할 것으로 판단된다.

• 한국환경생태학회지
• /
• 제32권6호
• /
• pp.658-666
• /
• 2018

본 연구는 요가와 명상 중심의 산림치유 프로그램이 성인의 기분상태와 스트레스 반응에 미치는 효과에 대하여 검증하고자 하였다. 실험에 동의한 성인 17명을 대상으로 강원도 홍천군 소재의 치유의 숲에서 2017년 9월 8일부터 10일까지 2박 3일 동안 실시하였다. 측정도구는 단축형 기분상태 척도(K-POMS-B: Korean version of Profile of Mood States-Brief)와 스트레스 반응 척도(Stress Response Inventory)를 사용하였다. 자료분석은 SPSS 24.0 프로그램을 사용하여 대응표본 t-검정을 통해 프로그램 참가 전과 후의 기분상태와 스트레스 반응 차이를 살펴보았다. 요가와 명상 중심의 산림치유 프로그램이 성인의 기분상태에 영향을 미치는가를 알아본 결과, 기분상태 총점은 통계적으로 유의미하게 감소하였다. 하위척도 중 활기는 증가하였으나 통계적으로 유의미하지 않았고 긴장, 우울, 분노, 피로, 혼돈은 통계적으로 유의하게 감소하였다. 요가와 명상 중심의 산림치유 프로그램에 참여한 성인의 스트레스 반응에 영향을 미치는가를 알아본 결과, 스트레스 반응은 통계적으로 유의미하게 감소하였다. 하위척도 중 공격성을 제외한 긴장, 신체화, 분노, 우울, 피로, 좌절은 통계적으로 유의미하게 감소하였다. 본 연구 결과가 향후 요가와 명상 중심의 산림치유 프로그램의 효과를 밝히는 기초자료로 활용될 수 있기를 기대한다.

• 한국지열·수열에너지학회논문집
• /
• 제19권1호
• /
• pp.14-25
• /
• 2023

In order to overcome the limitations of the individual renewable energy technologies such as photovoltaic (PV) and solar-thermal and effectively realize zero energy buildings, the photovoltaic-thermal (PVT) technology is being proposed. The current PVT module was simply combined with a PV panel and a solar-thermal collector. Therefore, it was difficult to commercialize because the PVT module is heavy and has no significant advantages compared to applying the individual technology. In this study, an attached PVT module is proposed for the commercialization and securing competitiveness in the renewable energy market. The attached PVT module enables on-site work with a simplified manufacturing process and can significantly reduce the supply price of the product. Moreover, it can be easily applied on already installed the PV panels. This study aims to commercialize the attached PVT module, the basic data was established as follows: (1) latest technology related to PVT module, (2) Global trends of the PVT module market. The possibility of commercialization of the attached PVT module was reviewed based on the results of the latest technology and market trends analysis. The supply price of the attached PVT module is lower than the existing products and it is considered that there is a high possibility of commercialization and introduction market with the advantage such as utilizing the existing PV industry and market. Moreover, the attached PVT module can be produced simultaneously the thermal and electrical energy, and it can be presented as an innovative alternative that can respond to the energy demand for residential sector.

• 방사선산업학회지
• /
• 제17권4호
• /
• pp.471-479
• /
• 2023

In In-situ radioactivity measurement techniques, efficiency calibration models use predefined models to simulate a sample's geometry and radioactivity distribution. However, simplified efficiency calibration models lead to uncertainties in the efficiency curves, which in turn affect the radioactivity concentration results. This study aims to develop an efficiency calibration optimization methodology to improve the accuracy of in-situ gamma radiation measurements for byproducts from industrial facilities. To accomplish the objective, a drive mechanism for rotational measurement of an byproduct simulator and a sample was constructed. Using ISOCS, an efficiency calibration model of the designed object was generated. Then, the sensitivity analysis of the efficiency calibration model was performed, and the efficiency curve of the efficiency calibration model was optimized using the sensitivity analysis results. Finally, the radiation concentration of the simulated subject was estimated, compared, and evaluated with the designed certification value. For the sensitivity assessment of the influencing factors of the efficiency calibration model, the ISOCS Uncertainty Estimator was used for the horizontal and vertical size and density of the measured object. The standard deviation of the measurement efficiency as a function of the longitudinal size and density of the efficiency calibration model decreased with increasing energy region. When using the optimized efficiency calibration model, the measurement efficiency using IUE was improved compared to the measurement efficiency using ISOCS at the energy of ²²⁸Ac (911 keV) for the nuclide under analysis. Using the ISOCS efficiency calibration method, the difference between the measured radiation concentration and the design value for each simulated subject measurement direction was 4.1% (1% to 10%) on average. The difference between the estimated radioactivity concentration and the design value was 3.6% (1~8%) on average when using the ISOCS IUE efficiency calibration method, which was closer to the design value than the efficiency calibration method using ISOCS. In other words, the estimated radioactivity concentration using the optimized efficiency curve was similar to the designed radioactivity concentration. The results of this study can be utilized as the main basis for the development of regulatory technologies for the treatment and disposal of waste generated during the operation, maintenance, and facility replacement of domestic byproduct generation facilities.

• 한국강구조학회 논문집
• /
• 제16권6호통권73호
• /
• pp.793-805
• /
• 2004

본 연구에서는 철골 연성 모멘트 골조에 대하여 반응수정계수(R)의 핵심 구성요소인 연성계수 및 강도계수를 평가하였다. 철골 연성 모멘트 골조에 대한 연성계수($R_{{\mu},MDOF}$) 는 단자유도 구조물에 대한 연성계수($R_{{\mu},SDOF}$)에 다자유도 보정계수($R_M$)를 곱하여 산정하였다. 단자유도 구조물에 대한 연성계수($R_{{\mu},SDOF}$)는 지진하중을 받는 탄소성 단자유도(SDOF) 구조물의 목표 변위 연성비와 주기에 따른 비선형 동적해석으로부터 산정하였다. 통계적 연구와 회귀분석으로부터 연성계수를 산정하기 위한 평가식이 제시되었다. 다자유도의 영향을 고려하기 위한 보정계수($R_M$)는 기존의 연구결과로보터 회귀분석을 이용하여 구하였다. 철골 연성 모멘트 골조에 대한 강도계수는 비선형 정적해석으로부터 산정하였다. 철골 연성 모멘트 골조의 연성 계수 및 강도계수를 평가하기 위하여, 구조물의 층수(4, 8 및 16층), 지진구역계수(Z=0.075, 0.2 및 0.4), 골조 시스템(외곽골조 및 분배골조) 및 붕괴 메카니즘(강기둥-약보 및 약기둥-강보)을 설계 매개변수로 하여 총 36개의 예제구조물을 설계하였다. 철골 연성 모멘트 골조의 연성계수 및 강도계수에 이러한 설계 매개변수가 미치는 영향을 분석하였다.

• Journal of Acupuncture Research
• /
• 제27권4호
• /
• pp.147-178
• /
• 2010

Objectives : This study was to propose the improved instruction for authors and research ethic regulations by the comparative analysis of those of the domestic journals, for the purpose of enhancing the citation rate of Journal of Korean Acupuncture and Moxibustion Society. Methods : Narrative review method was used for comparatively analyzing instruction for authors of 34 domestic journals, especially focused on how to write a reference. Thereafter, in order to elucidate the drawbacks of current instruction for authors and research ethic regulations of the acupuncture and moxibustion society, the well prepared instructions and research ethic regulations was selected from them, which were compared with the present instructions for authors and research ethic regulations of the acupuncture and moxibustion society. Results : As a result of the comparative analysis of instruction for authors in the 34 domestic journals, style for references was based largely on that of National Library of Medicine and vancouver at the same time. The number of reference was limited according to types of writings. for example, the original article and case report was frequently limited to 40 and 20 references respectively. Authors were mostly listed up to six. If there are more, the first three or six authors were listed with 'et al'. it was generally recommended that using abstracts as references should be avoided and References to papers accepted but not yet published should be designated as 'in press' or 'forthcoming', and that the names of journals should be set in italics and abbreviated according to the List of Journals Indexed for Medline (formerly Index Medicus) published by the National Library of Medicine or koreanmed or WHO-IST, etc. In addition, citation of electrical literature, English writing of reference and obligational citation of more than two articles in the journals were encouraged. In consequence of comparison between well prepared instructions and research ethic regulations of the selected journals and those of current instructions for authors and research ethic regulations of the acupuncture and moxibustion society, the followings were needed to be added or revised. 1. Requirements for case reports were not mentioned. 2. Reporting Guidelines for Specific Study Designs were not included. 3. Previous Orthography of herbal prescription should be revised. 4. Orthography of authors and guidelines for writing article constituents such as title, abstract, introduction, method, statistics, results, discussions were not presented. 5. How to write a reference was so simplified. 6. Definition of Research Ethical Misconduct was omitted and establishment, management and members of committee for research ehtics were not mentioned, 7. Information, reception and investigative procedures of Research Ethical Misconduct was not specified. Conclusions : For the development of Journal of Korean Acupuncture and Moxibustion Society, apporopriate revision of the instruction for author and research ethic regulations should be made based upon the above findings. English writing of reference were believed to be one of the alternatives enhancing citation rate.

• 대한치과기공학회지
• /
• 제37권4호
• /
• pp.271-284
• /
• 2015

Purpose: The purpose of this study was to examine the usage of CAD/CAM, which is one of dental technologist duties, in an effort to look for any possible changes in the usage of CAD/CAM. It's specifically meant to compare the results of this study with those of Lee Jong-do, Park Kwang-Sig(2011)'s study in March, 2011, to determine if there were any changes over the past four years. The selected variables that were investigated were the ownership of CAD/CAM, awareness of it, the route of acquiring the first information on it, the merits and demerits of its usage, usage experience and educational experience about it. Methods: An online survey was conducted on the dental technologists who worked in urban communities including metropolitan cities to find out the usage of CAD/CAM in 2015 from July 15 to 31, 2015, after existing questionnaire items were modified. The collected data were analyzed by IBM SPSS statistics 22.0, and statistical data on frequency, percentage, mean and standard deviation for each item were obtained. To figure out the characteristics of the subjects and the relationship between their occupational characteristics and the usage of CAD/CAM, crosstabs, independent-samples t-test and one-way ANOVA were utilized. As for the usage of CAD/CAM in 2011, the results of Lee Jong-do, Park Kwang-Sig(2011)'s study were selected, and then a comparative analysis was made. The level of significance was all set at .05. Total 250 questionnaires were distributed to them, and 190(76.0%) were returned. After excluding 23 whose answers were uncertain or seemed to lack reliability, total 167(66.8%) were used in final analysis. Results: As a result of analyzing the usage of CAD/CAM that was one of dental technologist duties, there was a great increase in the ownership of CAD/CAM in their workplaces from 2.4 percent in 2011 to 71.7 percent in 2015, and there was an improvement in awareness about it and the necessity of its usage as well. In 2011, the Internet and mass media were the most common route that they got to know about it. They had a strong tendency to acquire related knowledge through education in 2015, and there were some changes in the products that they used or preferred. In both years, the great merit of CAD/CAM was the simplified manufacturing process of restoration, and it had another great advantages in 2015 such as the improved quality of restoration or improved environments for dental technology. Concerning disadvantages, high price was a big problem in 2011. In 2015, not only price but the burden of material costs, frequent breakdown, poor demand among dental clinics and a lack of CAD/CAM professionals were pointed out a lot. In the future, this researcher intends to make research to seek ways of improving CAD/CAM professionals. Conclusion: There was more awareness of CAD/CAM in 2015 than in 2011 when the changes in awareness of it were analyzed, and the finding suggest the necessity of sustained education and concern.