• Journal of the Korean GEO-environmental Society
• /
• v.6 no.3
• /
• pp.47-54
• /
• 2005

In many practical cases, design methods of pile have been used mainly semi empirical bearing capacity equations. It can be done that confirmation of pile bearing capacities through using of dynamic and static tests during constructing or after constructions. If a prediction of layered point pile bearing capacity could be done through simple tests during field investigation, it could be done that more reliable design of pile than a prediction of using semi empirical equations or static formulations. This paper suggests a method to estimated point bearing capacity during in-situ investigation by using the dynamic rod model pile and verifies the point bearing capacity compare with results of static pile load tests. From test results, the unit ultimate point bearing capacities are relatively similar through a dynamic rod model pile tests and static pile load tests. The unit ultimate point bearing capacity by using N value is shown about 50 % value of measured unit ultimate point bearing capacity from field test result and the prediction of the unit ultimate point bearing capacity by using N value is shown very conservative, illogical and uneconomical pile designs.

• Imaging Science in Dentistry
• /
• v.50 no.3
• /
• pp.237-243
• /
• 2020

Purpose: The aim of this study was to evaluate the clinical efficacy of a Tanner-Whitehouse 3 (TW3)-based fully automated bone age assessment system on hand-wrist radiographs of Korean children and adolescents. Materials and Methods: Hand-wrist radiographs of 80 subjects (40 boys and 40 girls, 7-15 years of age) were collected. The clinical efficacy was evaluated by comparing the bone ages that were determined using the system with those from the reference standard produced by 2 oral and maxillofacial radiologists. Comparisons were conducted using the paired t-test and simple regression analysis. Results: The bone ages estimated with this bone age assessment system were not significantly different from those obtained with the reference standard (P>0.05) and satisfied the equivalence criterion of 0.6 years within the 95% confidence interval (-0.07 to 0.22), demonstrating excellent performance of the system. Similarly, in the comparisons of gender subgroups, no significant difference in bone age between the values produced by the system and the reference standard was observed (P>0.05 for both boys and girls). The determination coefficients obtained via regression analysis were 0.962, 0.945, and 0.952 for boys, girls, and overall, respectively (P=0.000); hence, the radiologist-determined bone ages and the system-determined bone ages were strongly correlated. Conclusion: This TW3-based system can be effectively used for bone age assessment based on hand-wrist radiographs of Korean children and adolescents.

• Tuberculosis and Respiratory Diseases
• /
• v.43 no.5
• /
• pp.805-811
• /
• 1996

Congenital cystic adenomatoid malformation of the Lung(CCAM) is characterized by anomalous fetal development of terminal respiratory structures, resulting in an adenomatoid proliferation of bronchiolar elements and cystic formation. CCAM was first described and differentiated from other cystic lung disease in the English literature by Ch'in and Tang in 1949. CCAN is a rare, potentially lethal form of congenital pulmonary cystic disease and the salient features of lesion are an irregular network of terminal respiratory bronchiole-like structures and macrocysts variably lined by pseudostratified ciliated columnar epithelium and simple cuboidal epithelium. Adult presentation of CCAM of the lung is so rare that only 9 cases have been reported in the literature of date. The pathogenesis of CCAM remains disputed and reseachers have variously proposed that the lesion represents a developmental anomaly, hamartoma, or a fonn of pulmonary dysplasia. Van Dijk and Wagenvoort divided CCAM into three subtypes : cystic, intermediated, and solid. These correspond to types I, II, and III of Stocker. In adults, the evaluation of cystic or multi cystic lung disease requires consideration of a differential diagnosis including the acquired lesions of lung abscess, cavitary neoplasm or inflammatory mass, bullous disease, bronchiectasis, and postionflammatory pneumatocele. Congenital lesions such as sequestration, bronchopulmonary-foregut anomalies, and bronchogenic cyst are also encounted. The definitive treatment for CCAM is complele removal of the involved lobe. Panial lobectomy leads to multiple complications, including severe post-operative infection. We report a case of CCAM in a 14-year-old female presentated with a pneumothorax and large bullae, who was treated by surgical remove of the involved lobe.

• Journal of Digital Contents Society
• /
• v.12 no.1
• /
• pp.33-48
• /
• 2011

In this thesis, a field experience activity support system is designed and implemented for improving social skills of children with developmental disabilities. The proposed system is designed to allow the students to experience various field activities around their local community. The proposed system has the following characteristics. First, it can improve effectiveness of field experience by providing very practical pre-study information to students. Second, the systems provides very practical and real-world problem-solving abilities rather than providing simple experience and superficial information. Third, the system allows students to change the contents according to their local community environments and purpose of use. Fourth, the system can be used as education for living at home as well as field experience study at schools. After applying the proposed system to students with developmental disabilities, the following positive results are obtained. First, the system have good effect on students with severe developmental disabilities when the system is used for prestudy. Specially those students are highly interested and motivated on study subjects. Second, at real field experience study place, students are well adapted and are very interested in their activities. Third, in the light of post-evaluation after field experience, it is reported that lots of study contents remain in their memory.

• Journal of Korea Water Resources Association
• /
• v.31 no.6
• /
• pp.795-806
• /
• 1998

Soil moisture is affected by regional climate, soil characteristics and land surface condition, etc,. Especially, the changes in land surface condition is more than other factors, which is mainly due to rapid urbanization and industrialization. This study is to evaluate how the change of land surface condition impacts on soil moisture field evolution using a simple model of soil moisture dynamics. For the quantification of soil moisture field, the first half of the paper is spared for the statistical characterization based on the first- and second-order statistics of Washita '92 and Monsoon '90 data. The second half is for evaluating the impact of land cover changes through simulation study using a model for soil moisture dynamics. The model parameters, the loss rate and the diffusion coefficient, have been estimated using the observed data statistics, where the changes of surface conditions are considered into the model by applying various parameter sets with different second-order statistics. This study is concentrated on evaluating the impact due to the changes of land surface condition variability. It is because we could easily quantify the impact of the changes of its areal mean based on the linear reservoir concept. As a result of the study, we found; (1)as the variability of land surface condition, increases, the soil moisture field dries up more easily, (2)as the variabilit y of the soil moisture field is the highest at the beginning of rainfall and decreases as time goes on to show the variability of land surface condition, (3)the diffusion effect due to surface runoff or water flow through the top soil layer is limited to a period of surface runoff and its overall impact is small compared to that of the loss rate field.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.5
• /
• pp.73-79
• /
• 2020

As the number of earthquakes gradually increases on the Korean Peninsula, much research has been actively conducted to detect earthquakes quickly and accurately. Because traditional seismic stations are expensive to install and operate, recent research is currently being conducted to detect earthquakes using low-cost MEMS sensors. In this article, we evaluate how a low-cost MEMS acceleration sensor installed in a smartphone can be used to detect earthquakes. To this end, we installed about 280 smartphones at various locations in Korea to collect acceleration data and then assessed the installed sensors' noise floor through PSD calculation. The noise floor computed from PSD determines the magnitude of the earthquake that the installed MEMS acceleration sensors can detect. For the last few months of real operation, we collected acceleration data from 200 smartphones among 280 installed smartphones and then computed their PSDs. Based on our experiments, the MEMS acceleration sensor installed in the smartphone is capable of observing and detecting earthquakes with a magnitude 3.5 or more occurring within 10km from an epic center. During the last several months of operation, the smartphone acceleration sensor recorded an earthquake of magnitude 3.5 in Miryang on December 30, 2019, and it was confirmed as an earthquake using STA/LTA which is a simple earthquake detection algorithm. The earthquake detection system using MEMS acceleration sensors is expected to be able to detect increasing earthquakes more quickly and accurately.

• Journal of dental hygiene science
• /
• v.13 no.4
• /
• pp.403-409
• /
• 2013

The purpose of this study was to evaluate the correlation between caries experience, Quantitative Light-Induced Fluorescence-Digital (QLF-D) redings and new caries activity test (Cariview) results in preschool children. Fifty-seven healthy kindergarten children (male 28, female 29) were participated this study. The calibrated dentist investigated the caries experience of children and new caries activity test. Cariview samples were incubated in the activated medium at $37^{\circ}C$ for 48 hours. All QLF-D taking and readings were performed by one experienced and trained operator under identical conditions in a dental unit chair located in a darkened room. Analysis range was limited to the maxillary and mandibular anterior teeth. QLF-D redings (white spot and dental plaque) were analysed using QLF system. The dft index had a relatively high correlation with the QLF-D redings (white spot: r=0.617, simple plaque score: r=0.500) (p<0.01). Also, there was significant correlation between dft index and the Cariview score (r=0.286) (p<0.05). However, the Cariview score had no significant correlation between dt index and ft index (p>0.05). QLF-D can be evaluated objectively the initial caries lesions and dental plaque correlated with caries experience. Therefore, QLF-D will be useful to the study of caries prediction.

• Journal of Digital Convergence
• /
• v.14 no.8
• /
• pp.355-362
• /
• 2016

This study is descriptive research to investigate frequency of performance, self-confidence and performance assessment scores of core nursing skills by 227 nursing students. As the result of this study, they who experienced more than 10times in clinical practice was V/S and they never experienced items such as transfusion, enema and T-tube care. For pre self-confidence, they had the highest V/S and the lowest transfusion. For post self-confidence, they had the lowest IM. As a result of the evaluation, oxygen therapy with nasal cannula was measured highest, and IM was measured lowest. Frequency of performance had positive correlations with self-confidence(r=0.414, p<.001) and performance assessment scores(r=0.322, p=.007). Self-confidence with performance assessment scores had positive correlation(r=0.281, p=.003). Study results suggested that clinical practice is carried out, non-invasive, simple measurements, and they had low self-confidence of the items with low frequency of performance, so convergency training methods to complement this point are needed.

• KIPS Transactions on Computer and Communication Systems
• /
• v.7 no.7
• /
• pp.165-174
• /
• 2018

The purpose of this study is to verify the effects of R&D process maturity on product development performance and to verify whether R&D project performance mediating effect. The questionnaire was collected and analyzed to 131 persons related to the R&D work in 55 companies and public institutions performing R&D work. The results of this study are as follows, the effect of R&D process maturity on product development performance and mediating effect of R&D project performance were analyzed by simple and multiple regression analysis. Regression analysis was analyzed by SPSS statistical program. The higher the maturity level of the R&D process, the higher the product development performance and the R&D project performance, and the R&D project performance is partially mediated. It is concluded that it is important to establish and operate a systematic R&D process and to develop a project management methodology suitable for the characteristics of a company in order to improve product development performance. It is expected that if this study are utilized as practical R&D management methodology in corporate management, it will contribute to improvement of company product performance.

• Journal of Digital Convergence
• /
• v.10 no.11
• /
• pp.619-626
• /
• 2012

The purpose of this study is to compare and analyze the utilization state of smart devices and the recognition level of educational application development of the general high school and the specialized high school. Specialized high school students preferred the utilization of smart devices more and daily spent on the devices more time than general high school students. As for the learning field, language for the general high school and the certificate of qualification for the specialized high school were shown high. The merit of smart device utilization is the use of spare time and its infrastructure was most required. The most expected content is a video lecture for the general high school and cooperative learning for the specialized high school and the most satisfied point was mobility. The specialized high school students feel more necessity about the application development for culinary education and had a plan to utilize it more and more preferred practice videos. As for the food development areas, the general high school students hoped simple food and the specialized high school students did cooking technician food and they both hoped the application to be uploaded in portal sites and the department homepage. The application development for culinary education is required to focus simulation learning including practice videos and cooking recipes and add an evaluation function to check the academic achievement levels. It is required to provide the subject goals of each course and concrete information on solving problems. Contents including video, music, texts need to be attached to improve learning immersion. There should be the beginning and development of a lesson and the flow of arrangement and communication between main bodies of learning should be improved by utilization of SNS cooperative learning services.