• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.1
• /
• pp.89-96
• /
• 2023

In this paper, a ferrosilicon by-product was evaluated to confirm the feasibility of recycling it as supplementary cementitious material of ordinary Portland cement in concrete. Three different levels of replacement ratio (10 %, 20 % and 30 % of total binder) were applied to find which is the most beneficial to be used as a binder. Ferrosilicon concrete was initially assessed at setting time and compressive strength. Durability was evaluated by the resistance to chloride penetration test(RCPT) and alkali-silica reaction(ASR) with a comparison to silica fume concrete due to their similarity in chemical composition. The porosimetry and X-ray diffraction analysis along with energy dispersive X-ray spectroscopy give information on the microstructural characteristics of the ferrosilicon concrete. It was found that 10 % ferrosilicon concrete has higher strength while 20 %, 30 % have lower strength than OPC concrete. However, chemical resistance to chloride attack is higher when replacement is increased. Compared to silica fume, the durability of ferrosilicon might be less efficient however, it is obviously beneficial than OPC. High SiO₂ content in ferrosilicon results in producing more C-S-H gel which could make denser pore structure. Most of the risk of alkali silica reaction to silicate binders through length change tests was less than 0.2 %, and both mortar using ferrosilicon and silica fume showed better resistance to alkali silica reaction as the substitution rate increased.Reuse of industrial waste rather than producing highly refined additives might reduce environmental load during manufacture and save costs.

• Korean Journal of Environmental Biology
• /
• v.41 no.1
• /
• pp.60-88
• /
• 2023

This study was conducted to investigate the vertical distribution and vascular plants in the Gakho mountain. Form the results of three field surveys from May 2022 to September 2022, a total of 478 total taxa, representing 426 species, 11 subspecies, 35 varieties, four forms, and two hybrids were identified, which were categorized in 282 genera and 94 families. We identified the elevational distribution ranges of 398 taxa of vascular plants. Among them, 19 taxa were endemic to Korea, one taxon was identified as a rare plant. The floristic target plants amounted to 72 taxa, specifically two taxa of grade V, two taxa of grade IV, 16 taxa of grade III, 27 taxa of grade II, and 25 taxa of grade I. Further, 71 taxa were identified as northern lineage plants. A total of 19 taxa of alien plants were identified, with a Naturalized Index of 4.0%, an Urbanization Index of 6.6%, and three plants that disturbed the ecosystem. The result of analyzing the pattern of species richness showed a reversed hump shape with minimum richness at mid-high elevation. A cluster analysis showed a high degree of similarity between adjacent elevation sections that are geographically adjacent with similar habitat environments. Warmth index in the Gakho mountain ranged from 57.2℃·month to 84.2℃·month. Our results provide basic data on vascular plants and valuable information on elevational distribution ranges of current plant species in the Gakho mountain, which could serve as a baseline for comparison of the shifts in elevation under future climate change.

• Asia Marketing Journal
• /
• v.9 no.3
• /
• pp.117-149
• /
• 2007

It can be explained by congruity theory as a process that consumers engage in a matching process to identify personal community that is congruent with their self-images to find the identification between the self and the personal community. Personal community cues that evoke certain images are viewed as activating similar beliefs about the self (e.g., high status). Individuals prompt a comparison process to determine whether the personal community and self-image are congruent and imagine prototypical users of the personal community and select ones that maximize similarity to their actual or desired self-concept. Identity is devided into personal identity and social identity. Consumers are likely to be influenced by both personal identity and social identity. In this article the influencing factors of the commitment to on-line personal community are explored by the sources of both personal identification and social identification. The results are as follows. The maintenance expression and enhancement expression of personal self influence the level of personal identification positively and the maintenance expression and enhancement expression of social self influence the level of social identification positively. The level of both social and personal identification positively influence the commitment to on-line personal community which gives positive responses to the source enterprise that allows the cyberspace and the other benefits to be used.

• Communications of Mathematical Education
• /
• v.37 no.4
• /
• pp.569-590
• /
• 2023

The purpose of this case study is to compare and analyze the covariational reasoning levels of two middle school students revealed in the process of solving and generalizing algebra word problems. A class was conducted with two middle school students who had not learned quadratic equations in school mathematics. During the retrospective analysis after the class was over, a noticeable difference between the two students was revealed in solving algebra word problems, including situations where speed changes. Accordingly, this study compared and analyzed the level of covariational reasoning revealed in the process of solving or generalizing algebra word problems including situations where speed is constant or changing, based on the theoretical framework proposed by Thompson & Carlson(2017). As a result, this study confirmed that students' covariational reasoning levels may be different even if the problem-solving methods and results of algebra word problems are similar, and the similarity of problem-solving revealed in the process of solving and generalizing algebra word problems was analyzed from a covariation perspective. This study suggests that in the teaching and learning algebra word problems, rather than focusing on finding solutions by quickly converting problem situations into equations, activities of finding changing quantities and representing the relationships between them in various ways.

• KIPS Transactions on Software and Data Engineering
• /
• v.12 no.10
• /
• pp.455-460
• /
• 2023

Text augmentation is a methodology that creates new augmented texts by transforming or generating original texts for the purpose of improving the performance of NLP models. However existing text augmentation techniques have limitations such as lack of expressive diversity semantic distortion and limited number of augmented texts. Recently text augmentation using large language models and few-shot learning can overcome these limitations but there is also a risk of noise generation due to incorrect generation. In this paper, we propose a text augmentation method called TAGS that generates multiple candidate texts and selects the appropriate text as the augmented text. TAGS generates various expressions using few-shot learning while effectively selecting suitable data even with a small amount of original text by using contrastive learning and similarity comparison. We applied this method to task-oriented chatbot data and achieved more than sixty times quantitative improvement. We also analyzed the generated texts to confirm that they produced semantically and expressively diverse texts compared to the original texts. Moreover, we trained and evaluated a classification model using the augmented texts and showed that it improved the performance by more than 0.1915, confirming that it helps to improve the actual model performance.

• Advances in nano research
• /
• v.16 no.4
• /
• pp.325-340
• /
• 2024

There are several novel uses for dispersing many nanoparticles into a conventional fluid, including dynamic sealing, damping, heat dissipation, microfluidics, and more. Therefore, melting heat and mass transfer characteristics of a 3-D MHD Hybrid Nanofluid flow over a rotating disc with presenting dufour and soret effects are assessed numerically in this study. In this instance, we investigated both ferric sulfate and molybdenum disulfide as nanoparticles suspended within base fluid water. The governing partial differential equations are transformed into linked higher-order non-linear ordinary differential equations by the local similarity transformation. The collection of these deduced equations is then resolved using a Chebyshev spectral collocation-based algorithm built into the Mathematica software. To demonstrate how different instances of hybrid/ nanofluid are impacted by changes in temperature, velocity, and the distribution of nanoparticle concentration, examples of graphical and numerical data are given. For many values of the material parameters, the computational findings are shown. Simulations conducted for different physical parameters in the model show that adding hybrid nanoparticle to the fluid mixture increases heat transfer in comparison to simple nanofluids. It has been identified that hybrid nanoparticles, as opposed to single-type nanoparticles, need to be taken into consideration to create an effective thermal system. Furthermore, porosity lowers the velocities of simple and hybrid nanofluids in both cases. Additionally, results show that the drag force from skin friction causes the nanoparticle fluid to travel more slowly than the hybrid nanoparticle fluid. The findings also demonstrate that suction factors like magnetic and porosity parameters, as well as nanoparticles, raise the skin friction coefficient. Furthermore, It indicates that the outcomes from different flow scenarios correlate and are in strong agreement with the findings from the published literature. Bar chart depictions are altered by changes in flow rates. Moreover, the results confirm doctors' views to prescribe hybrid nanoparticle and particle nanoparticle contents for achalasia patients and also those who suffer from esophageal stricture and tumors. The results of this study can also be applied to the energy generated by the melting disc surface, which has a variety of industrial uses. These include, but are not limited to, the preparation of semiconductor materials, the solidification of magma, the melting of permafrost, and the refreezing of frozen land.

• Smart Media Journal
• /
• v.13 no.6
• /
• pp.80-89
• /
• 2024

This study aims not only to address environmental issues caused by indiscriminate fashion consumption, specifically in the context of Fast Fashion but also to find an alternative and a sustainable solution that is 'Upcycling' using the 3D clothing simulation program Z-weave. Upcycling products have limitations in that it is difficult to produce samples since finished products must be produced directly with limited materials and resources like waste clothes. To overcome these limitations, a 3D clothing simulation program is introduced to effectively utilize the limited resources of waste clothing. The purpose of this study is to confirm the similarity between a virtual fabric created through Z-weave and a real fabric, through this, to evaluate the possibility of application in the actual fashion industry. As a research method, surveys and interviews were conducted with related majors on virtual clothing created as similar as possible to actual clothing by adjusting the physical properties within the Z-weave program. This study attempted to describe the impact of digital technology on the fashion industry and how 3D clothing simulation programs can be used in sustainable fashion production.

• Journal of the Korean Society of Radiology
• /
• v.83 no.6
• /
• pp.1286-1297
• /
• 2022

Purpose To assess the usefulness of various metal artifact reduction (MAR) methods in patients with hip prostheses. Materials and Methods This retrospective study included 47 consecutive patients who underwent hip arthroplasty and dual-energy CT. Conventional polyenergetic image (CI), orthopedic-MAR (OMAR), and virtual monoenergetic image (VMI, 50-200 keV) were tested for MAR. Quantitative analysis was performed in seven regions around the prostheses. Qualitative assessments included evaluation of the degree of artifacts and the presence of secondary artifacts. Results The lowest amount of image noise was observed in the O-MAR, followed by the VMI. O-MAR also showed the lowest artifact index, followed by high-keV VMI in the range of 120-200 keV (soft tissue) or 200 keV (bone). O-MAR had the highest contrast-to-noise ratio (CNR) in regions with severe hypodense artifacts, while VMI had the highest CNR in other regions, including the periprosthetic bone. On assessment of the CI of pelvic soft tissues, VMI showed a higher structural similarity than O-MAR. Upon qualitative analysis, metal artifacts were significantly reduced in O-MAR, followed by that in VMI, while secondary artifacts were the most frequently found in the O-MAR (p < 0.001). Conclusion O-MAR is the best technique for severe MAR, but it can generate secondary artifacts. VMI at high keV can be advantageous for evaluating periprosthetic bone.

• The korean journal of orthodontics
• /
• v.18 no.2
• /
• pp.459-474
• /
• 1988

A study was made of a method of rational assessment on the roentgeno-cephalogram in orthodontic practice. Fifty eight measurements were analyzed on the roentgeno-cephalograms of 50 male and 50 female Korean adults with the acceptable profile and the normal occlusion. The means and standard deviations of measurements were studied in male and female groups by various analytic methods, and the sex difference was examined statistically. The obtained data were compared with those of the Japanese and American standards by useing a Japanese adults standard polygon chart reported by lizuka and Ishikawa. Amongs of 58 measurements, 14 have been selected as statistically significant and clinically useful, and used to make a Korean adult standard polygon chart. The results obtained were as follows: 1. Standards for cphalometric analysis in Korean adults were obtained, and the polygon chart and cephalometric profilogram were also made by using the standards in order to apply to a clinical diagnosis. 2. The sex difference was recognized in linear measurements, but not in angular measurments. 3. In comparison with the American standards from Downs and Graber, the Korean showed significant differences in angle of convexity, mandibular plane angle, Y-axis angle, interincisal angle and lower incisor to mandibular plane angle. Thus, the Korean showed a more retruded chin position, convex facial type, than white people. 4. In comparison with the Japanese standards from Iizuka and Ishikawa, the Korean showed a significant similarity with the Japanese, especially in females. 5. Upper incisor to Huxely line angle, established as a new measurement, proved to be paralell to X-Y axis angle.

• Journal of Global Scholars of Marketing Science
• /
• v.20 no.1
• /
• pp.89-97
• /
• 2010

This study researches the effects of common features on a no-choice option with respect to regulatory focus theory. The primary interest is in three factors and their interrelationship: common features, no-choice option, and regulatory focus. Prior studies have compiled vast body of research in these areas. First, the "common features effect" has been observed bymany noted marketing researchers. Tversky (1972) proposed the seminal theory, the EBA model: elimination by aspect. According to this theory, consumers are prone to focus only on unique features during comparison processing, thereby dismissing any common features as redundant information. Recently, however, more provocative ideas have attacked the EBA model by asserting that common features really do affect consumer judgment. Chernev (1997) first reported that adding common features mitigates the choice gap because of the increasing perception of similarity among alternatives. Later, however, Chernev (2001) published a critically developed study against his prior perspective with the proposition that common features may be a cognitive load to consumers, and thus consumers are possible that they are prone to prefer the heuristic processing to the systematic processing. This tends to bring one question to the forefront: Do "common features" affect consumer choice? If so, what are the concrete effects? This study tries to answer the question with respect to the "no-choice" option and regulatory focus. Second, some researchers hold that the no-choice option is another best alternative of consumers, who are likely to avoid having to choose in the context of knotty trade-off settings or mental conflicts. Hope for the future also may increase the no-choice option in the context of optimism or the expectancy of a more satisfactory alternative appearing later. Other issues reported in this domain are time pressure, consumer confidence, and alternative numbers (Dhar and Nowlis 1999; Lin and Wu 2005; Zakay and Tsal 1993). This study casts the no-choice option in yet another perspective: the interactive effects between common features and regulatory focus. Third, "regulatory focus theory" is a very popular theme in recent marketing research. It suggests that consumers have two focal goals facing each other: promotion vs. prevention. A promotion focus deals with the concepts of hope, inspiration, achievement, or gain, whereas prevention focus involves duty, responsibility, safety, or loss-aversion. Thus, while consumers with a promotion focus tend to take risks for gain, the same does not hold true for a prevention focus. Regulatory focus theory predicts consumers' emotions, creativity, attitudes, memory, performance, and judgment, as documented in a vast field of marketing and psychology articles. The perspective of the current study in exploring consumer choice and common features is a somewhat creative viewpoint in the area of regulatory focus. These reviews inspire this study of the interaction possibility between regulatory focus and common features with a no-choice option. Specifically, adding common features rather than omitting them may increase the no-choice option ratio in the choice setting only to prevention-focused consumers, but vice versa to promotion-focused consumers. The reasoning is that when prevention-focused consumers come in contact with common features, they may perceive higher similarity among the alternatives. This conflict among similar options would increase the no-choice ratio. Promotion-focused consumers, however, are possible that they perceive common features as a cue of confirmation bias. And thus their confirmation processing would make their prior preference more robust, then the no-choice ratio may shrink. This logic is verified in two experiments. The first is a $2{\times}2$ between-subject design (whether common features or not X regulatory focus) using a digital cameras as the relevant stimulus-a product very familiar to young subjects. Specifically, the regulatory focus variable is median split through a measure of eleven items. Common features included zoom, weight, memory, and battery, whereas the other two attributes (pixel and price) were unique features. Results supported our hypothesis that adding common features enhanced the no-choice ratio only to prevention-focus consumers, not to those with a promotion focus. These results confirm our hypothesis - the interactive effects between a regulatory focus and the common features. Prior research had suggested that including common features had a effect on consumer choice, but this study shows that common features affect choice by consumer segmentation. The second experiment was used to replicate the results of the first experiment. This experimental study is equal to the prior except only two - priming manipulation and another stimulus. For the promotion focus condition, subjects had to write an essay using words such as profit, inspiration, pleasure, achievement, development, hedonic, change, pursuit, etc. For prevention, however, they had to use the words persistence, safety, protection, aversion, loss, responsibility, stability etc. The room for rent had common features (sunshine, facility, ventilation) and unique features (distance time and building state). These attributes implied various levels and valence for replication of the prior experiment. Our hypothesis was supported repeatedly in the results, and the interaction effects were significant between regulatory focus and common features. Thus, these studies showed the dual effects of common features on consumer choice for a no-choice option. Adding common features may enhance or mitigate no-choice, contradictory as it may sound. Under a prevention focus, adding common features is likely to enhance the no-choice ratio because of increasing mental conflict; under the promotion focus, it is prone to shrink the ratio perhaps because of a "confirmation bias." The research has practical and theoretical implications for marketers, who may need to consider common features carefully in a practical display context according to consumer segmentation (i.e., promotion vs. prevention focus.) Theoretically, the results suggest some meaningful moderator variable between common features and no-choice in that the effect on no-choice option is partly dependent on a regulatory focus. This variable corresponds not only to a chronic perspective but also a situational perspective in our hypothesis domain. Finally, in light of some shortcomings in the research, such as overlooked attribute importance, low ratio of no-choice, or the external validity issue, we hope it influences future studies to explore the little-known world of the "no-choice option."