• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.420-425
• /
• 2004

Lee and Kang measured side-necking deformation near a crack-tip for CT specimen using Stereoscopic Digital Speckle Photography and Digital Image Correlation. In this work the same technique was applied to SENB specimen. We happened to find that the deformation shape of the side-necking is similar to the one of plastic region estimated by McClictock using slip line theory. Based on volume constancy of plastic deformation as well as this finding, it is expected that a linear relationship holds between the volume of plastic deformation region and the one of side-necking upon the lateral surface of a specimen. To prove the idea, a preliminary study has been performed using 3-D finite element method on a model with modified boundary layer formulation. As the result, it is shown that the idea works well with acceptable error.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.10a
• /
• pp.90-94
• /
• 2002

In this paper, Compression in the case where dissimilar blocks are twinned variously are carried out in the condition of lubricated interface. The degree of growth is experimentally investigated. Moreover, numerical simulations are carried out by the elastic-plastic FEM for the case of the dissimilar blocks with the initial sawtooth angle of 60。. The dissimilar blocks are twinned, larger difference between material properties leads smaller growth, and the degreased interface leads smaller growth than that in the lubricated one. Furthermore, by the simulation of compression where dissimilar blocks are twinned, it is confirmed that the tendency of the general deformation pattern is very similar to the experiment.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.4
• /
• pp.378-384
• /
• 2005

This paper proposes a theoretically rigorous analysis procedure that compares the position domain and range domain carrier-smoothed-code filters for differential GNSS positioning. Utilizing consistent error covariance formulation, it is shown that filtering in the position domain is, in theory, more advantageous than range domain carrier-smoothed-code filtering. It is also shown that if the visible satellite set does not change during a sufficiently long time interval the performances of position and range domain filters are similar.

• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.375-379
• /
• 2015

Planetary nebula in elliptical galaxies pose a problem in dark matter theory. Using data from the Planetary Nebula Spectrograph (PN. S), Romanowsky et al. (2003) reported that less dark matter than expected was found within 5 to 6 effective radii of three elliptical galaxies. We attempt to explain similar observations of elliptical galaxies with MOdified Newtonian Dynamics (MOND). We collect 16 elliptical galaxies with planetary nebulae from the public web data of PN. S. We investigate the dynamical behavior by analyzing the line-of-sight velocity dispersion in the framework of MOND.

• Journal of Families and Better Life
• /
• v.22 no.5
• /
• pp.161-173
• /
• 2004

Although scholars have been using qualitative research commonly since 1990 in Korea, discussions on the criteria for the quality of qualitative research have been rare. The purpose of this paper was to analyze the trends of qualitative research methodology in Family Studies, and critically examine qualitative research articles published in the three most prominent journals in the field of family studies. The three journals were Journal of Korean Home Management Association, Journal of the Korean Home Economics Association, and Journal of Family Relations. During the period from 1998 to 2003, twenty seven published articles were identified as qualitative research articles from the three journals. Qualitative research in family studies had a wide variety of purposes, but the articles shared similar characteristics: the main goal was to understand the nature of the research participants' experiences and perspectives. The common data collection techniques were in-depth interview, journal writing, and document analysis. Also, all research articles had applied various techniques to data analysis such as grounded theory, or van Manen's method. This article also discussed the usefulness of qualitative research methodology in broadening and deepening the knowledge body in Korean Family Studies.

• 전기의세계
• /
• v.15 no.5
• /
• pp.32-39
• /
• 1966

This voltage Regulator, which regulates voltage in different way from the conventional regulator, is constructed by circular-plate core type stators and controllers (are similar to rotor of conventional). The principle of this Voltage Regulator is based on the rotating magnetic field theory including peculiar homopolar and heteropolar concept. Comparing with the conventional induction regulator, this regulator need not to have short windings and can cancel armature reaction. Moreover, it is able to decrease the machine noise and control the phase of it freely. And it's efficiency can become more than 95% which almost the same as that of transformer's. By increasing numbers of cores of the same size, the output power can be increased, the insulation can be decreased and high Voltage can directly be connected because applied voltage is distributed to each core. This Voltage Regulator can be also used as a current regulator, a starter a induction motor and a phase transformer etc.

• Industrial Engineering and Management Systems
• /
• v.3 no.1
• /
• pp.1-11
• /
• 2004

This paper proposes a new algorithm for determining an optimal control input for production systems. In many production systems, completion time should be planned within the due dates by taking into account precedence constraints and processing times. To solve this problem, the max-plus algebra is an effective approach. The max-plus algebra is an algebraic system in which the max operation is addition and the plus operation is multiplication, and similar operation rules to conventional algebra are followed. Utilizing the max-plus algebra, constraints of the system are expressed in an analogous way to the state-space description in modern control theory. Nevertheless, the formulation of a system is currently performed manually, which is very inefficient when applied to practical systems. Hence, in this paper, we propose a new algorithm for deriving a state-space description and determining an optimal control input with several constraint matrices and parameter vectors. Furthermore, the effectiveness of this proposed algorithm is verified through execution examples.

• Proceedings of the KIPE Conference
• /
• 2002.11a
• /
• pp.25-28
• /
• 2002

In this paper, 2 phase modulated SRPP-PWM(Separately Random Pulse Position PWM) is proposed. This PWM technique is based on the 2 phase modulated SVPWM(Space Vector Pulse Width Modulation). In according to the theory of SVPWM, 2 phase modulated SVPWM uses two pulses, not three pulses as in 3 phase modulated SVPWM. In the proposed SRPP-PWM scheme, each of two phase pulses is located randomly in each switching interval. The experimental results show that the voltage and switching noise harmonics are spread to a wide band area. Also, the performance of the proposed 2 phase modulated SRPP-PWM and the conventional SVPWM are compared to each other In result, the speed response is nearly similar to each other from the viewpoint of the v/f constant control.

• Transactions of Materials Processing
• /
• v.6 no.2
• /
• pp.118-135
• /
• 1997

In order to analyze the deformation and residual curvature of steel sheets in the strip processing lines, a program for calculating curvature and work hardening of sheet was developed. Strip deformation caused by repeated bending under tension in the process lines was analyzed on the basis of the incremental-plasticity theory with the mixed hardenting model for the purpose of predicting the strip shape and the yield stress change. The developed calculation program was applied to predict curl and gutter of sheets within a 10% difference. The yield stress increment was also predicted with the similar accuracy. Application of the model to tension legvelling process showed that gutter could be controlled by intermesh and elongation. The yield stress increment in the electro-galvanizing line calculated by the developed program was found to be dependent on the yield strength, the applied tension and the diameter of the smallest roll.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.10 no.1
• /
• pp.24-28
• /
• 1990

Centrifugally Cast Stainless Steel generally shows similar structure to the weld in austenitic stainless steel in the point of casting. When examining this material ultrasonically, the beam does not generally propagate straightforward but rather deviates from its original direction and this phenomenon called skewing is originally caused by anisotropic material. In order to calculate the beam skewing effect theoretically, work has been performed based on a model approach which has regarded material itself as having been composed of multi-layered columnar dendrite structure and the result was compared with the one from experiment. The result from both theory and experiment showed good correlation and ultrasonic beam showed the least skewing with around 45 degree incident angle.