• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.05a
• /
• pp.143-149
• /
• 2002

Ball reducer with waved grooves has many advantages over other reducers for the high-reduction ratios, low noise and low energy loss, etc. The mechanism of force transmission is very similar to that of cam and follower in automobile valve train system especially in the contact geometry. In this study, we have investigated the traces of contact between ball and outer race and the working behaviors with a certain reduction ratio. In order to verify the contact behaviors between ball and outer race, which determines the critical endurance life the contact velocity and load are computed for a cycle. During some period of a cycle, the contact velocity reverses its direction very suddenly, which causes undesirable endurance performance of this machinery. From the computational investigation in this work, we hope to predict similar contact damages in other machinery due to this kind of contact behaviors, which is very common in many contact phenomena.

• Korean Journal of Head & Neck Oncology
• /
• v.26 no.2
• /
• pp.204-211
• /
• 2010

Background and Objectives : Boundary detection and drawing are essential in 3D reconstruction of neck mass. Manual tracing methods are popular for drawing head and neck tumor. To improve manual tracing, circular boundaries overlapping was tried. Materials and Methods : Twenty patients with neck tumors were recruited for study. Representative frames were examined for shapes of outline. They were all single closed curves. Circular boundaries were added to fill the outlines of the tumors. Inserted circles were merged to form single closed curves(Circular boundary overlapping, CBO). After surface rendering, 3 dimensional images with volumes and area data were made. Same procedures were performed with manual tracing from same cases. 3D images were compared with surgical photographs of tumors for shape similarity by 2 doctors. All data were evaluated with Mann-Whitney test(p<0.05). Results : Shapes of boundaries from CBO were similar with boundaries from manual tracing. Tumor outlines could be filled with multiple circular boundaries., While both boundary tracing gave same results in small tumors, the bigger tumors showed different data. Two raters gave the similar high scores for both manual and CBO methods. Conclusion : Circular boundary overlapping is time saver in 3 dimensional reconstruction of CT images.

• Journal of Korea Foundry Society
• /
• v.34 no.1
• /
• pp.6-13
• /
• 2014

The mechanical properties of low-pressure die cast (LPDC) A356-T6 automotive road wheels are evaluated and correlated with their corresponding microstructures. In this study, two types of alloy wheels processed using different LPDC gating system are investigated. The yield stress, tensile stress, and elongation values tested at room temperature are correlated with the secondary dendrite arm spacing (SDAS) with respect to the gating system, and are also compared with similar studies. The SDAS and precipitates are examined using optical microscopy, scanning electron microscopy (SEM) and energy-dispersive spectroscopy. The phase information is also investigated using X-ray diffraction. Charpy impact tests are also performed from $-100^{\circ}C$ to $200^{\circ}C$, and the fracture surfaces are examined using SEM. The impact energy is demonstrated to increase with increasing temperatures without exhibiting specific transition behaviors as in other nonferrous alloys. The fracture toughness is also evaluated using three point bend test with single-edged bend specimens. The obtained fracture toughness values are in good agreement with those in similar studies.

• Tribology and Lubricants
• /
• v.30 no.4
• /
• pp.240-245
• /
• 2014

Low alloy heat resistant brake disk and sintered brake pad are applied to mechanical brake system for the speed-up of urban rapid transit. In this research, we analyzed how the frictional characteristics between brake disk and pad are influenced by the disk mass. At a high disk mass, the friction stability was the lower value as a result of the lack of tribofilm formation at the disk surface. Wear rates of friction materials showed the higher value at a low disk mass and wear rates of 10 mm and 15 mm showed the similar level. Average friction coefficient was the lower value at the 10 mm disk thickness and range of variation of average friction coefficient was also the smaller value at the 10 mm disk thickness. However, there were no significant changes in the friction coefficients under any of test conditions. Surface roughness of a disk showed the highest value at the 5 mm disk and surface roughnesses of 10 mm and 15 mm showed the similar level. As a result, friction characteristics of disk mass influenced the friction stability, as well as the wear rate of friction pad and disk, but not the friction coefficient.

• Structural Engineering and Mechanics
• /
• v.5 no.4
• /
• pp.339-353
• /
• 1997

Fiber reinforced plastic (FRP) rods provide certain benefits over steel as concrete reinforcement, such as corrosion resistance, magnetic and electrical insulation, light weight, and high strength. FRP composites can be combined with a steel core to form hybrid reinforcing rods that take advantage of properties of both materials. The objective of this study was to characterize the bond behavior of hybrid FRP rods made with braided epoxy-impregnated aramid or poly-vinyl alcohol FRP skins. Eleven rod types were tested using two concrete strengths. Specific topics examined were bond strength, slip, and type of failure in concentric pull-out tests from concrete cubes. From analysis of identical pull-out tests on both hybrid and steel rods, information on relative bond strength and behavior were obtained. It is concluded that strength is similar but slip in hybrid rods is much higher. Hybrid rods failed either by pull-out or splitting the concrete block (with or without yielding of the steel core). Experimental data showed consistency with similar test results presented in the literature.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.15 no.2
• /
• pp.57-64
• /
• 2013

As the clothing materials have been more functional and advanced, the cotton fabrics for dress shirts or blouses have been more qualified and the sewability for high degree of completion has been required. This study aims to identify the seam strength depending on the change of stitch density of fine cotton fabrics by fabric and thread and so the general seam performance of fine cotton fabrics by analyzing the seam efficiency and breaking mode of seams. For an experiment, 3 kinds of fine cotton fabrics and 2 kinds of threads were selected and the sample was made by changing the stitch density by four steps. Then, the seam strength was measured. Next, the seam efficiency and breaking mode of seams were analyzed on the basis of the results of seam strength measurement. The results are as follows: All fabrics showed the similar tendency in seam strength. The seam strength is related to the tensile strength and thread strength, it increased only to a certain stitch density. When the stitch density exceeded a certain level, fabrics were destroyed or threads were cut. Then, the seam strength didn't increase. Furthermore, the more the seam strength increased, the more the seam efficiency increased. For increasing the maximum stitch density, it was required to use the fabrics and threads which had similar properties, in other words, the high thread strength for the high tensile strength and the low thread strength for the high tensile strength.

• Journal of Korea Foundry Society
• /
• v.27 no.3
• /
• pp.120-125
• /
• 2007

The microstructure, mechanical properties and melting range of Ni-Cr-Mo based alloys were investigated to develop Be-free Ni-Cr-Mo base dental alloys for Porcelain-Fused-to-Metal Firing(PFM). All as-cast alloys showed dendritic structure. Rockwell hardness of 20Cr7Mo was increased with addition of Si and Ti. On the contrary, it was decreased with addition of Co. The duplex alloying elemental addition such as 3Co + xTi, 2Si + xCo and 2Si + xTi to 20Cr7Mo resulted in much increase of hardness. Rockwell hardness and compressive strength for 20Cr3CoSiTi or 17Cr6CoSiTi alloy that add Si-Ti had similar values compared to the commercial alloys. Melting range for 20Cr3CoSiTi and 17Cr6CoSiTi alloy that add Si-Ti showed similar or lower than commercial alloys. In conclusion, 20Cr3CoSiTi and 17Cr6CoSiTi alloys can be applied for commercial use.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.7
• /
• pp.3317-3320
• /
• 2016

Purpose: To assess the success rates of two step loop electrosurgical excision procedure (LEEP) compared with conventional cold conization procedures for decreasing positive surgical margins. Materials and Methods: This study was conducted on 70 patients who underwent colposcopic evaluation in Zeynep Kamil Women and Children's Health Training and Research Hospital between 2013-2015 with indications of CIN 2/3 or persistent CIN 1 for more than 2 years. The study included age matched groups of patients with similar histopathololical lesions who underwent cold conization (n=40) or LEEP (N=30). Results: Comparison of tissue characteristics between the two groups revealed significantly higher deepest depth and lower volume of tissue removed by the two step LEEP. Ectocervical positivity rate was similar between groups (1/39 versus 0/29, P>0.05), while endocervical surgical margin positivity rate was significantly higher in the cold conization group (9/39 versus 0/29, P<0.05). Surgical margin positive cases were significantly older than the cases with negative margins (P<0.05). Conclusions: Two step LEEP made it easier to reach the squamocolumnar junction in the endocervical region with lower blood loss and applicability in office settings. Our study suggests to use two step approach in cases with high grade and glandular CIN.

• Preventive Nutrition and Food Science
• /
• v.21 no.2
• /
• pp.147-154
• /
• 2016

In this study, the effects of a pre-filter system and electrolysis system on the safe and efficient reuse of brine in the cabbage salting process were investigated. First, sediment filter-electrolyzed brine (SF-EB) was selected as brine for reuse. Then, we evaluated the quality and microbiological properties of SF-EB and Chinese cabbage salted with SF-EB. The salinity (9.4%) and pH (4.63) of SF-EB were similar to those of control brine (CB). SF-EB turbidity was decreased (from 0.112 to 0.062) and SF-EB residual chlorine (15.86 ppm) was higher than CB residual chlorine (0.31 ppm), and bacteria were not detected. Salinity (2.0%), pH (6.21), residual chlorine (0.39 ppm), chromaticity, hardness, and chewiness of cabbage salted with SF-EB were similar to those of cabbage salted with CB. The total bacterial count in cabbage salted with CB was increased as the number of reuses increased (from 6.55 to 8.30 log CFU/g), whereas bacteria in cabbage salted with SF-EB was decreased (from 6.55 to 5.21 log CFU/g). These results show that SF-EB improved the reusability of brine by removing contaminated materials and by sterilization.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.10
• /
• pp.129-133
• /
• 2009

Considerable attention has been focused on digital X-ray systems with transmission. However, only a few attempts have been made using X-ray backscatter systems. This study developed a Data Acquisition System (DAS) for backscattered X-rays. The imaging system used X-ray backscatter at low energy levels, which has unique advantages in terms of acquiring information that cannot be obtained using the transmission system. Such systems are of potential benefit in the medical, industrial, security and military fields because of its practical benefits and the low doses used. The developed system is a similar body scan system. Experiments were carried out using a several metal materials and a fish, which produces results similar to those obtained using the human body during X-ray testing.