• Journal of Ginseng Research
• /
• v.26 no.3
• /
• pp.145-150
• /
• 2002

The changes in sensory characteristics, physical and chemical properties of raw ginseng (4-year-root, 50 g/root) were investigated when they were packaged individually in a soft film bag (ONY/LDPE/L-LDPE ; 200$\times$300 ㎜, 90 ㎛) and stored at 25$\^{C}$ for twenty days. Seventy-five percentages of sixty raw ginseng samples were adulterated and the most phenomenon of adulterating the raw ginseng was softening. Softened ginsengs were softer and stickier and they had stronger pungent and sour odors, stronger sour and sweet tastes than normal ginseng but had weaker ginseng and fresh odors. In addition, softened ginsengs exhibited lower hardness and pH, lower contents of diol-type ginsenosides, lower ratios of unsaturated fatty acids to saturated fatty acids and higher contents of water-soluble pectins than normal ginseng while contents of moisture, crude protein, ether-soluble materials and crude ash of the softened ginsengs were similar to those of normal ginseng.

• Journal of Wetlands Research
• /
• v.21 no.4
• /
• pp.321-333
• /
• 2019

A primary aspect of low impact development (LID) design that affects performance efficiency, maintenance frequency, and lifespan of the facility is the type of filter media as well as the arrangement or media profile. Several LID guidelines providing media specifications are currently available and numerous studies have been published presenting the effectiveness of these systems. While some results are similar and consistent, some of them still varies and only a few focuses on the effect of filter media type and arrangement on system performance. This creates a certain level of uncertainty when it comes to filter media selection and design. In this review, a synthesis of filter media specifications from several LID design guidelines are presented and relevant results from different laboratory and field studies are highlighted. The LID systems are first classified as infiltration or non-infiltration structures, and vegetated or non-vegetated structures. Typical profiles of the media according to classification are shown including the different layers, materials, and depth. In addition, results from previous studies regarding the effect of filter media characteristics on hydraulic and hydrologic functions as well as pollutant removal are compared. Other considerations such as organic media leaching, clogging, media washing, and handling during construction were also briefly discussed. This review aims to provide a general guideline that can contribute to proper media selection and design for structural LIDs. In addition, it also identifies opportunities for future research.

• Food Science and Preservation
• /
• v.17 no.6
• /
• pp.807-813
• /
• 2010

Muscat Bailey A grapes, one of the major grape varieties in Korea, contain 18-20% (w/w) sugars, which is less than the amount required to make red wine. In the present study, fermentation of freeze-concentrated Muscat Bailey A grape juice to $24^{\circ}Brix$ was performed using several industrial wine yeasts, including Saccharomyces cerevisiae $OC_2$, S. cerevisiae Fermivin and S. cerevisiae W-3. During fermentation, changes in the levels of soluble solids, alcohols, and yeast viable counts were monitored. Wine quality parameters including organic acid, minor alcohol, sensory score, etc. were also analyzed. Alcohol contents reached maximal levels after 9 days of fermentation, and were 12.6% (v/v) when Fermivin was used and 13% (v/v) when strains $OC_2$ and W-3 were used. No major difference between strains was apparent, except that Fermivin fermentation was somewhat slower in terms of both alcohol production and sugar consumption. Similar levels of soluble solids and total phenols were measured in wines fermented by each of the three strains. The total acid level of W-3 wine was high, whereas the alcohol content of Fermivin wine was low. Although the wines were variable in terms of acetaldehyde and minor alcohol contents, the levels of these materials were much lower than the limits set by the Korean National Tax Service. Upon sensory evaluation, $OC_2$ wine obtained the highest scores in terms of color, flavor, and overall acceptance. However, the best taste score was awarded to the Fermivin wine, which had the same flavor score as $OC_2$ wine but a slightly lower overall acceptance score.

• Journal of the Korean Society for Railway
• /
• v.11 no.4
• /
• pp.357-363
• /
• 2008

This study investigates the durability of carbon/epoxy composites for use on train car bodies under a salt water spray environment. Salt water solution with 5% NaCl, similar to natural salt water, was used for the salt water environmental tests. The specimens were obtained from a composite panel consisting of an epoxy matrix reinforced with T700 carbon fabric. The specimens were exposed to the salt water environment for up to 12 months. Mechanical tests were performed to obtain tensile properties, flexural properties, and shear properties. Dynamic mechanical analysis was used to measure such thermal properties as storage modulus, loss modulus, and tan $\delta$. Also FT/IR tests were conducted to investigate changes in chemical structure with exposure. The results revealed that fiber-dominated mechanical properties were not affected much by exposure time, but matrix-dominated mechanical properties decreased with increasing exposure time. Storage modulus was not very sensitive to exposure time, but glass transition temperature was affected, slightly decreasing with increasing exposure time. Although the peak intensity of FT/IR curves was affected slightly by exposure time, the peak shape and peak location of FT/IR curves were not noticeably changed. Carbon/epoxy composites used for this study were relatively stable to the salt water environment.

• Korean Journal of Medicinal Crop Science
• /
• v.8 no.4
• /
• pp.362-372
• /
• 2000

This study was conducted to obtain the basic information on the production of high yield and qualitied yam in Andong, major yam-producing district, in Kyongbuk province, using three major Yam cultivars, such as Danma, Jangma and Alata (round type). Alata showed the longest tuber width while Jangma showed the longest tube length. Danma showed the highest tube yield at 2,123 kg/10a. Tubes of Alata had higher dry ratio than those of other cultivars, suggesting that Alata could be used as good processing materials. Characteristics of top parts, such as vine length, leaf number, and lateral vine number showed typical sigmoid curves. Tuber characteristics such as length, width and fresh weight of tuber were linearly increased as the growth period was progressed. Relative growth rate (RGR) for new tuber and stem reached the highest value at 86 DAT (days after transplanting). There were similar tendencies among the cultivars in net assimilation rate (NAR). The highest crop growth rate (CGR) was appeared at 156 DAT regardless of cultivars. In the changes of leaf area ratio (LAR), there were significant differences among three cultivars. LAR were decreased at 86, 106 and 136 DAT for Alata, Danma and Jangma, respectively. However, specific leaf weight (SLW) was greatly increased at 176 DAT, and leaf area index (LAI) was decreased at 156 DAT in all cultivars.

• Journal of the Mineralogical Society of Korea
• /
• v.20 no.2 s.52
• /
• pp.135-145
• /
• 2007

The needs for the ultra fine particles have been increased in preparation field of raw powders such as fine ceramics and high functional products. In this study, a series of wet grinding experiments were carried out on inorganic powders such as calcite, pyrophyllite and talc by a stirred ball mill. The particle size distribution of ground products of each test material fur a given grinding time was found to be expressed by the grinding rate (selection function) which was obtained from the grinding kinetics analysis. The median diameter decreased from 6.49 to $0.47{\mu}m$ in calcite, and decreased from 3.91 to $1.14{\mu}m$ in pyrophyllite. However, in talc, median diameter was decreased a little bit from 10.30 to $6.67{\mu}m$. The grinding rate changing on calcite and pyriphyllite were similar at the same conditions. However, in the case of talc, it was observed that the grinding rate was not increased compared to other samples.

• Journal of Gastric Cancer
• /
• v.8 no.4
• /
• pp.244-249
• /
• 2008

Konkuk University Hospital (KUH), which opened in September 2005, is currently categorized as a secondary hospital. Early on after its establishment, the surgical residents and nurses were relatively inexperienced in the treatment of stomach cancer. Therefore, the quality of surgery for stomach cancer at KUH may be different from that of the existing large-scale tertiary hospitals. The purpose of this study is first to investigate the clinicopathological characteristics of the gastric cancer patients at the KUH, and second to compare our morbidity & mortality rates with those of previous studies, and we also analyzed the risk factors of morbidity at the early stage of a training hospital. Materials and Methods: This study retrospectively collected the clinicopathological characteristics and the post-operative morbidity rates and mortality rates with using the electronic medical records of all the patients who went under a gastric cancer operation at KUH from September 2005 to April 2008. Results: The total number of gastric cancer patients who underwent operation was 201. The morbidity rate and death rate at KUH were 10.4% and 0.5%, respectively. The morbidity has increased with an older age. The other variables had no influence on morbidity. Conclusion: The morbidity rate, death rate and the clinicopathological characteristics of gastric cancer patients at KUH were similar to those of the previous reports. We found that age is the main factor affecting the morbidity rate after stomach cancer surgery. For further surgical qualification of stomach cancer surgery at KUH, it is necessary to collect the survival data of patients who undergo stomach cancer surgery.

• Journal of Gastric Cancer
• /
• v.19 no.4
• /
• pp.427-437
• /
• 2019

Purpose: We aimed to evaluate the clinical characteristics of microsatellite instability in early gastric cancer. Materials and Methods: The microsatellite instability status of resected early gastric tumors was evaluated using two mononucleotide repeat markers (BAT25 and BAT26) and three dinucleotide repeat markers (D5S346, D2S123, and D17S250). Tumors with instability in two or more markers were defined as microsatellite instability-high (MSI-H) and others were classified as microsatellite stable (MSS). Results: Overall, 1,156 tumors were included in the analysis, with 85 (7.4%) classified as MSI-H compared with MSS tumors. For MSI-H tumors, there was a significant correlation with the female sex, older age, tumor location in the lower gastric body, intestinal histology, lymphovascular invasion (LVI), and submucosal invasion (P<0.05). There was also a trend toward an association with lymph node (LN) metastasis (P=0.056). In mucosal gastric cancer, there was no significant difference in MSI status in tumors with LN metastasis or tumors with LVI. In submucosal gastric cancer, LVI was more frequently observed in MSI-H than in MSS tumors (38.9% vs. 25.0%, P=0.027), but there was no difference in the presence of LN metastases. The prognosis of MSI-H tumors was similar to that of MSS tumors (log-rank test, P=0.797, the hazard ratio for MSI-H was adjusted by age, sex, pT stage, and the number of metastatic LNs, 0.932; 95% confidence interval, 0.423-2.054; P=0.861). Conclusions: MSI status was not useful in predicting prognosis in early gastric cancer. However, the frequent presence of LVI in early MSI-H gastric cancer may help guide the appropriate treatment for patients, such as endoscopic treatment or limited LN surgical dissection.

• Journal of the Korean Institute of Gas
• /
• v.20 no.6
• /
• pp.16-22
• /
• 2016

Coating pipe(PLP) has been generally used in buried site for protecting the corrosion. To prevent the damage by occurring the defect, other construction or execution works, an anti-oxidation environment was forcibly made by using protective potential. Coating and protective potential are applied simultaneously, but corrosion rate or defects are not easy to observe because soil composition has many uncertainty. Also, defect of coating pipe can not be directly observed. A corrosion coupon can easily measure a corrosion rate directly. The corrosion rate was measured with 6 scenarios using corrosion coupon during about 1 year(6 scenarios are based on soil type and protective potential or not in this research. Resultingly, the corrosion coupon has not occurred in the case of protected by potential current, but corrosion has occurred in a non-protected site. The corrosion rate was measured at least in the clay, and the propensity of corrosion rate was similar in other soil(sand and loams). The local corrosion has occurred in the clay because of high water content. On the other hand, general corrosion was occurred in sand and loams. Commonly, sand is not to corrosive soil. Although, corrosion occurred in sand can be estimated by chemical component and valid with chemical analysis report.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.06a
• /
• pp.163-165
• /
• 2013

IMO(International Maritime Organization) is existed the movement for revising ISM Code so that the maintenance history and the trouble information given trading in a ship can be transferred. An empirical analysis was made on the influence that will have upon shipping industry through surveying on the recognition on ISM Code revision in employees of the relevant field and on the expected problems given being amended ISM Code as the above. In conclusion, the positive effect is judged to be more in the aspect of ship safety, which is the aim of ISM Code, rather than the negative effect, which may take place given being revised ISM Code. In other words, the clean market can be formed through this because fairness is maintained on both sides given trading in a ship by which opening the maintenance record and the trouble history is applied equally to a buyer and a seller. Ships can be reduced a loss of time and cost in preventing similar problems and seeking solution that may appear in important equipments, through this maintenance record. Also, based on these materials, it comes to be available for analyzing a risk of ship and preventing and managing a risk, thereby being increased ability of maintenance and repair in a ship, resulting in being judged to likely contributing to ship safety and environmental-pollution prevention.