• 보존과학연구
• /
• s.27
• /
• pp.5-22
• /
• 2006

Mireuksa is a temple that was established in the Baekjea Period and continued around to the 16thcentury. The sites of the temple throughout diverse periods such as the United Shilla Period, KoryuPeriod, and Chosun Period including the one of the early temple in the late Baekjea Period were discovered. In those temple sites, there were lots of diverse artifacts discovered including artifacts in the Bronze Age. In this study, the compositions of four bronze bells excavated from Mireuksa site in Iksan were analyzed and the manufacturing technique of bronze bells was studied through the observation of microstructure. Also, the analytical cases of ancient bronze bells were collected and compared. Furthermore, the provenance study of the bronze bells site was attempted with the Pbisotope ratio. The results aim to offer crucial keys for discovering the aspect of society as well as information about the origin, development, and the route of propagation of ancient technologies. Bronze bell No. 1 showed an unexpected composition as Cu was found 98.5% in it. There were shown twins which were created by annealing and an even phase in the fine grains. It was also shown that bronze bell No. 2 and 4 had a high content of Pb although they showed a similar composition with general bronze bells in terms of Sn content. As shown in the analysis characteristics table of Korean bronze bell of this study, the ancient bronze bell used Pb of which content was limited to 2.12% in general, however, the results showed 15.5% and 13.2% respectively, which is an excessive amount. Asa result of analyzing inclusion in the microstructure of bronze bell No. 2, it was found that sulfide group mineral was used since there appeared S(14.55%). Also, it was proven that $CuFeS_2$ or$Cu_5FeS_4$ was used as a raw material because there was a small amount of Fe. As a result of analyzing inclusion of bronze bell No. 4, the bronze bell sample contained S(13.43%) and it is thought that sulfide group mineral was used, however, it had no Fe. Therefore, it is not connected to $CuFeS_2$ which is the main mineral of Korea. In addition, a strain line was shown with processing in bronze bell No. 2 and 4. As a result of provenance study of bronze bell No. 2 and 4 using the Pb isotope ratio, they or their raw materials are estimated to come from the southern China. Bronze bell No. 3 showed only Cu and Sn, and it is featured with a relatively low amount of Sn(6.63%). The microstructure has only phase, andintergranular corrosion was highly in progress.

• Education of Primary School Mathematics
• /
• v.19 no.4
• /
• pp.329-347
• /
• 2016

This paper investigated the views of effective mathematics instruction on the part of school administrators, and then compared and contrasted such views with those of elementary school teachers based on the previous study. A total of 32 school administrators participated in this study and responded to three types of the questionnaire. The results of this study showed that school administrators regarded good mathematics teaching as using concrete materials and teaching students to think. School administrators put their first priority on curriculum and content among four main domains of good mathematics teaching, and did on constructing curriculum among seven sub-domains of good mathematics teaching. They agreed that good mathematics teaching includes teaching by reconstructing the curriculum according to students' various levels and teaching to emphasize the connection among mathematical concepts. However, they thought that good mathematics teaching might not include teaching for fluent calculation or teaching in well-equipped learning environment. The results of comparison of perspectives regarding good mathematics teaching between school administrators and teachers showed remarkably similar tendency. However, a noticeable difference was that school administrators agreed more than elementary school teachers with regard to the 20 elements related to effective mathematics instruction. This paper closes with implications based on the similarities and differences regarding effective mathematics instruction perceived by school administrators and teachers.

• Journal of Genetic Medicine
• /
• v.12 no.1
• /
• pp.25-30
• /
• 2015

Purpose: Charcot-Marie-Tooth disease (CMT) is a peripheral neuropathy mainly divided into CMT type 1 (CMT1) and CMT2 according to the phenotype and genotype. Although molecular pathologies for each genetic causative have not been revealed in CMT2, the correlation between cell death and accumulation of misfolded proteins in the endoplasmic reticulum (ER) of Schwann cells is well documented in CMT1. Establishment of in vitro models of ER stress-mediated Schwann cell death might be useful in developing drug-screening systems for the treatment of CMT1. Materials and Methods: To develop high-throughput screening (HTS) systems for CMT1, we generated cell models using transient expression of mutant proteins and chemical induction. Results: Overexpression of wild type and mutant peripheral myelin protein 22 (PMP22) induced ER stress. Similar results were obtained from mutant myelin protein zero (MPZ) proteins. Protein localization revealed that expressed mutant PMP22 and MPZ proteins accumulated in the ER of Schwann cells. Overexpression of wild type and L16P mutant PMP22 also reduced cell viability, implying protein accumulation-mediated ER stress causes cell death. To develop more stable screening systems, we mimicked the ER stress-mediated cell death in Schwann cells using ER stress inducing chemicals. Thapsigargin treatment caused cell death via ER stress in a dose dependent manner, which was measured by expression of ER stress markers. Conclusion: We have developed genetically and chemically induced ER stress models using Schwann cells. Application of these models to HTS systems might facilitate the elucidation of molecular pathology and development of therapeutic options for CMT1.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.4
• /
• pp.318-326
• /
• 2013

The effect of finger joint location and distance from joint to joint one another on 3 point mid-concentration bending strength properties was investigated in this experiment. Resorcinol-phenol formaldehyde (RPF) and aqueous vinyl urethane (AVU) was used to domestic Pinus densiflora Sieb. et Zucc and imported Picea sitchensis Carr. that have been cut to different width of 0.15 mm between finger tip and root width and the distance from loading point to finger joint was 0, 30, 40, 50, 60 mm. The effect was not found on the location and distance of finger joint for bending modulus of elasticity, while the efficiency of bending strength property increased proportionally as the location of finger joint from the load point and the distance between finger joint increased. No influence was shown by finger joint location and distance beyond 3 times of specimen thickness, since similar values were shown between the solid wood and no destruction occurred materials.

• Korean journal of food and cookery science
• /
• v.9 no.1
• /
• pp.52-56
• /
• 1993

This study was examined on the change of mineral contents (Calcium, Potassium, Magnesium Zinc, Iron, Sodium, Phosphorus) in Sam-gye-tang broth cooked by various cooker and boiling time. The results were as follows; 1) In cauldron, the contents of Calcium, Potassium, Magnesium Zinc Iron Sodium, Phosphorus were increased in proportion to boiling time. In pressure cooker, the contents of Calcium, Potassium, Magnesium, Zinc are increased according to boiling time but the contents of Iron, Sodium, Phosphorus were showed the maxium value at 120 minutes and were decreased since then. 2) Ca/P was 1:0.91 in raw materials of Sam-gye-tang. But the extracting rate of Ca/P of the broth cooked in cauldron was 1:3.58∼1:4.68 and 1:2.02∼l:3.96 in pressure cooker. This rate was quite different from the recommended one of 1:1∼l:1.5. 3) In the increasing rate of minerals according to boiling time, the increasing rate of Calcium was showed similar in cauldron and pressure cooker, but Potassium, Magnesium, Sodium, Phosphorus were showed the maximum increasing rate from 30 to 60 minutes in cauldron and pressue cooker. Zinc was showed the maximum increasing rate from 120 to 150 minutes in cauldron and from 30 to 60 minutes in pressure cooker.

• Korean Journal of Food Science and Technology
• /
• v.29 no.5
• /
• pp.854-859
• /
• 1997

In order to compare physicochemical properties of aqueous extract in 3 beans (small red bean, mung bean, black soybean), proximate composition, free sugars, free amino acids, minerals, absorbance and surface refractance color were investigated. Regardless of raw materials composition, the 3 beans extracts had similar proximate compositions. Free sugar analysis showed that fructose, glucose, sucrose, maltose, raffinose and stachyose were varied among the extracts. Raffinose and stachyose were the major sugar and fructose was measured only in black soybean and glucose was merely found in small red bean. Seventeen free amino acids in beans extract were analysed in the extracts. Among the free amino acids, arginine, aspartic acid, glutamic acid and serine were the main amino acids. Black soybean extract had maximum absorbance at 460 nm and 540 nm. L value of black soybean extract was lower than those of small red bean and mung bean.

• Korean Journal of Food Science and Technology
• /
• v.33 no.6
• /
• pp.720-727
• /
• 2001

This study was carried to investigate the changes in physical and chemical properties of Yukwa during preparation with addition of antioxidants and to develop its storage condition. Antioxidants (tocopherol and Oxyfos) were used in syrup coating and the packaging materials used were PET/EVOH $(16\;{\mu}m)/PL$ : P1 and PET/EVOH $(24\;{\mu}m)/PL$ : P2 (YOP1: P1 with Oxyfos, YOP2 : P2 with Oxyfos, YTP1 : P1 with tocopherol, YTP2 : P2 with tocopherol). Color values measured for Yukwa showed that L values of YOP1, YOP2, YTP1 and YTP2 were changed little during storage while a and b values of YOP1, YOP2, YTP1 and YTP2 were slightly decreased. Hardness and chewiness in textural properties were also decreased during storage. Yukwa packed in YOPl and YOP2 maintained less than 40 in peroxide value during for 12 weeks of storage period. The major fatty acid composition of frying oil were linoleic acid (54.2%), oleic acid (23.4%), palmitic acid (11.3%), linolenic acid (6.5%) and stearic acid (4.6%). There was no difference in composition of fatty acid during storage. Sensory evaluation (Yukwa odor and rancid odor) showed very similar results with determined by electronic nose. YTP1 and YTP2 had maintained sensory characteristics of Yukwa during 10 weeks storage.

• Journal of Conservation Science
• /
• v.26 no.4
• /
• pp.445-458
• /
• 2010

The deterioration and structural damage such as exfoliation, cracks, and separation of painted layer on the wall paintings of Maitreya Hall in Geumsan-sa temple have been accelerated since it was re-positioned to the original place after the dismantling from the building in 1993. The examination of which result and analysis described in this study, is a preliminary survey for establishing conservation plan of the wall paintings. It aimed at the understanding of the physical and chemical characteristics of the materials applied in the 1993 conservation. The research focused on the south walls which displayed the worst condition compared to other walls. Samples for the examination for the understanding of micro-structure, chemical composition, cristalisation, and particle distribution, were collected for finishing, middle, and consolidated layers of the walls between pillars and the ones between brackets. Those samples were collected from separated fragments of the walls. The sample analysis displayed that: 1. the 1993 conservation used the similar type of weathered soil as the original for the finishing layer, and such soil and sand for the middle layer; 2. those walls are composed of a group of mineral particles which are relatively equal in size and shape and in their distribution; 3. the mineral particles were cohered forming solid aggregate due to the application of acrylic resin for the reinforcement on the wall. The main composition of crystalisation on the first and the second reinforcement layers of the back walls were lime plaster ($CaSO_4{\cdot}2H_2O$). The overall examination confirmed that the priority of the future conservation treatment should be given to the removal of the first and the second layers of reinforcement and the treatment on the back walls which were partially consolidated.

• Journal of Conservation Science
• /
• v.26 no.4
• /
• pp.349-360
• /
• 2010

The Yeongsheon Sinwoldong three-storied stone pagoda (Treasure No. 465) composed mainly of drusy alkali-granite. The major rock-forming minerals are biotite, quartz, amphiboles, orthoclase and plagioclase. Yellowish brown and black discoloration are formed at the eight sculpture Buddha of the stylobate. A broken rock fragments in the roof material were repaired using epoxy resin and cement mortar in the past. As a result of the infrared thermography analysis from the pagoda, cracks and exfoliation were not serious. Also, P-XRF analysis showed that concentration of Fe (mean 5,599ppm) and S (mean 3,270ppm) were so high in yellowish discoloration parts. Black discoloration area was detected highly Mn (mean 2,155ppm) concentration around the eight sculpture Buddha of the stylobate. The main reason for these are inorganic contaminants from disengaged rock ingredient and organic contaminants from withered plant body. Degree of physical weathering is relatively high in the southern and northern side. The eastern and western side had similar with weathering condition. The northern and eastern side were serious discoloration and biological weathering relatively. Therefore, we suggest that the pagoda need to do cleaning of biological contaminant and conservation treatment to weakened materials of rock and long term monitoring.

• The Korean Journal of Pesticide Science
• /
• v.15 no.4
• /
• pp.479-484
• /
• 2011

The number of comstock mealybug, Pseudococcus comstocki (Kuwana) suddenly increased at ginseng fields in Yangpyeong, Gyeonggi-do from mid July to early August. By the late of September just before digging up the roots of ginseng, more than 8 individuals of the comstock mealybug per plant were occurred and evenly dispersed around the roots. Through the bioassay in the laboratory, six environmental friendly agricultural materials (for example, Nobug, Kkagsami, GB-1, GB-2, GB-3, GB-5) containing sophora extract or paraffin oil as main components were selected by the effective control agents for controlling the comstock mealybug. These selected agents showed a quite similar insecticidal activities to 2 insecticides such as clothianidin and thiamethoxam registered in control of ginseng insect pests. Also. in the ginseng field test, the agent containing sophora extract and paraffin oil, like 2 insecticides showed high control effects against the comstock mealybug.