• Journal of dental hygiene science
• /
• v.10 no.3
• /
• pp.177-183
• /
• 2010

This study was begun to search effect of contact angles of elastic rubber impression materials on the surface of working cast. Of elastic rubber impression materials with a Type III consistency, such as polysulfide, polyether and addition silicone, we selected one and then measured the contact angle after dripping a distilled water 3.3ml. Then, after pouring a dental anhydrite in three types of impression materials, we prepared a working cast and then examined its surface. Contact angle was measured using a full automatic contact angle measuring system (DM-700, KYOWA, Japan), and the surface of working cast was observed using a field emission scanning electron microscope (JSM-6700F, JEOL Ltd., JAPAN). The following results were obtained: 1) $Mean{\pm}SD$ (SD: standard deviation) of the initial contact angles were $91.3{\pm}20.5^{\circ}$ in the addition silicone materials, $90.0{\pm}2.2^{\circ}$ in the polyethers and $101.5{\pm}2.3^{\circ}$ in the polysulfides. These results indicate that mean values were similar but standard deviations of the three materials showed a great discrepancy. 2) As the time elapsed, addition silicone materials were found to have a contact angle decreased abruptly as compared with the remaining two types. That is, the initial contact angle was $91.3^{\circ}$ and it was abruptly decreased to $29.4^{\circ}$ after 25 seconds. 3) In the polyethers, the initial contact angle was $101.5^{\circ}$ and it was decreased to $90.7^{\circ}$ after 25 seconds. In the polysulfides, however, the initial contact angle was $90.0^{\circ}$ and it was $84.2^{\circ}$ after 25 seconds. This showed almost no changes in the initial contact angles. Moreover, its magnitude was greater than that seen in additional silicones. 4) There were significant differences in the contact angles between the three types of elastic rubber impression materials as the time elapsed (p<0.001). On an observation on the surface of working cast, addition silicone materials were found to have the most dense surface. This was followed by polysulfides and polyethers in a descending order.

• Journal of Biosystems Engineering
• /
• v.33 no.4
• /
• pp.224-229
• /
• 2008

This study was aimed to minimize the impact force and vibration transmitted to the transporting materials from the trailer and wheel shaft by installing the leaf spring suspension device at the space between the wheel shaft and frame of power tiller trailer. The developed trailer equipped with leaf spring suspension device was compared to the existing trailer without suspension device, in order to identify the vibration absorption effect of the leaf spring. The results of this study could be summarized as follows; (1) The length and the maximum bending amount of the leaf spring were designed as 1,000 mm and 42 mm, respectively, considering the possible space for installing at below the trailer. When 4 leaf springs were installed on both wheel shafts, the allowable maximum load was identified as 9,418 N. (2) The average vibration accelerations for the frequency less than 20 Hz, where the severe transporting loss could be represented, were $0.017\;m/s^2$ and $0.133\;m/s^2$ for the developed and the existing trailer, respectively, showing the vibration absorption effect of about 87%. And the average vibration accelerations on the driver's seat for the frequency less than 20 Hz were $0.01\;m/s^2$ and $0.20\;m/s^2$ for the developed and the existing trailer, respectively, which showed the similar vibration absorption effect. (3) The change of the average vibration accelerations for the frequency from 20 Hz to 80 Hz showed the similar tendency with the result for the frequency less than 20 Hz, but the effect for developed trailer was reduced slightly. And the effect of vibration absorption for the above 80 Hz was reduced highly. However, by installing the leaf spring suspension device at the trailer, the low frequency below 40 Hz, which could affect on transporting loss severely, could be reduced highly. (4) The maximum vibration acceleration for the frequency less than 20 Hz were $0.027\;m/s^2$ and $1.267\;m/s^2$ for the developed and the existing trailer, respectively. And the change of maximum acceleration between 20 Hz and 120 Hz was showed similar tendency with the result for the frequency less than 20 Hz, but the width of change was reduced highly.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.1
• /
• pp.133-137
• /
• 2013

Background: To investigate the impact of ovarian transposition (OT) on survival rates of the patients with stage Ib squamous cell cervical cancer. Materials and Methods: Ninety-two subjects who underwent a radical hysterectomy including oophorectomy were evaluated. For nineteen (20.7%), OT was performed. Patients were divided into two groups, OT versus oophorectomy alone. The primary end-point of this study was to investigate the impact of OT on tumor recurrence rate and time, 5-year disease-free survival (DFS) and overall survival (OS). These comparisons were performed for subgroups including patients who received radiotherapy versus who did not. Statistical analyses were conducted using the Chi-square test, T-test and Mann-Whitney test. OS was examined using the Kaplan-Meier method. $P{\leq}0.05$ was considered to be statistically significant. Results: The median follow-up period was 89 months for OT and 81 months for the oophorectomy group (p>0.05). Both groups experienced similar recurrence rates (31.6% vs. 26.4%, p=0.181). The median duration from surgery to recurrence, and surgery to death were also similar between the groups (p>0.05). The 5-year DFS and OS rates were both 68.4% for the OT group, and 73.6% and 77.8% for the oophorectomy group (p=0.457 and p=0.307, respectively). While the 5-year DFS rate was not statistically significant between the OT and oophorectomy groups who did not receive radiotherapy (p=0.148), the 5-year OS rate was significantly higher in the oophorectomy group (95.4% vs 66.7%, respectively) without radiotherapy (p=0.05). The 5-year DFS and OS rates were statistically similar between the groups who received adjuvant radiotherapy (p>0.05). Conclusions: Ovarian transposition has not significantly negative effect on the survival rates when adjuvant radiotherapy will be applied, while 5-year OS may be less in OT group if radiotherapy is not mandatory.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.9
• /
• pp.3961-3968
• /
• 2015

Background: Variants of human papillomavirus (HPV) show more oncogenicity than do prototypes. The HPV16 Asian variant (HPV16As) plays a major role in cervical cancer of Asian populations. Some amino acid changes in the E6 protein of HPV16 variants affect E6 functions such as p53 interaction and host immune surveillance. This study aimed to investigate activities of HPV16As E6 protein on modulation of expression of miRNA-21 as well as interferon regulatory factors (IRFs) 1, 3, 7 and c-fos. Materials and Methods: Vectors expressing E6 protein of HPV16As (E6D25E) or HPV16 prototype (E6Pro) were constructed and transfected into C33A cells. HCK1T cells expressing E6D25E or E6Pro were established by transducing retrovirus-containing E6D25E or 16E6Pro. The E6AP-binding activity of E6 and proliferation of the transfected C33A cells were determined. MiR-21 and mRNA of interesting genes were detected in the transfected C33A cells and/or the HCK1T cells, with or without treatment by culture medium from HeLa cells (HeLa-CM). Results: E6D25E showed binding activity with E6AP similar to that of E6Pro. Interestingly, E6D25E showed a higher activity of miR-21 induction than did E6Pro in C33A cells expressing E6 protein. This result was similar to the HCK1T cells expressing E6 protein, with HeLa-CM treatment. The miR-21 up-regulation significantly corresponded to its target expression. Different levels of expression of IRFs were also observed in the HCK1T cells expressing E6 protein. Interestingly, when treated with HeLa-CM, IRFs 1, 3 and 7 as well as c-fos were significantly suppressed in the HCK1T cells expressing E6D25E, whereas those in the HCK1T cells expressing E6Pro were induced. A similar situation was seen for IFN-${\alpha}$ and IFN-${\beta}$. Conclusions: E6D25E of the HPV16As variant differed from the E6 prototype in its activities on epigenetic modulation and immune surveillance and this might be a key factor for the important role of this variant in cervical cancer progression.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.11
• /
• pp.6693-6696
• /
• 2013

Background: Cold knife conization is a surgical procedure that allows both diagnosis and treatment of cervical lesions at the same time. It is mainly performed for indications of high-grade cervical intraepithelial neoplasia (CIN). In this study, we aimed to investigate the clinical outcome of cases without CIN in cold knife conization specimen, following a high-grade lesion (CIN2/3) in cervical biopsy. Materials and Methods: We performed a retrospective cohort study at a tertiary referral hospital between January $1^{st}$ 2008 and August $1^{st}$ 2012. Cases that underwent cold knife conization for CIN2/3 within the study period were included. Cone-negative (Group 1) and cone-positive (Group 2) cases were analyzed for various clinical parameters, and were compared in the 1-year post-conization period for histological recurrence and human papillomavirus (HPV) DNA status. Results: A total of 173 women underwent cold knife conization for CIN2/3 within the study period. Twenty-two cases (12.7%) were included in Group 1 and 151 cases (87.3%) in Group 2. There were no significant differences between the two groups in terms of age, gravidity, parity, menopausal status and HPV-DNA status (pre-conization and 1 year post-conization) (p>0.05). Recurrence rates were also similar between the groups (9.1% vs 9.9%, p>0.05). Conclusions: Clinical outcomes were similar in terms of histological recurrence and HPV persistence after 1 year of follow-up between cone-negative and cone-positive cases. Clinical follow-up of cone-negative cases should therefore be performed similar to cone-positive cases.

• Journal of Life Science
• /
• v.30 no.11
• /
• pp.1021-1032
• /
• 2020

Numbers of companion animals and people rearing them are increasing in developed countries. As a result, businesses related to companion animals are becoming more advanced and specialized. Dogs have been cohabiting with humans as companions (pets) for thousands of years and, as a result, eat carbohydrate-rich foods similar to humans and maintain lives similar to their owners. Tight bonds between dogs and their owners are formed by sharing similar lifestyles, including a dwelling and food. Owners are responsible for their pets and treat them with emotional stability. Pets depend on their owners, although the food situation can cause stress. Since pet dogs are carnivorous in nature, providing pet dogs with a nutritionally balanced diet and functional materials is important for a healthy gut microbiome. Recently, the gut microbiota has become a research focus because it is associated with protection from harmful pathogens and immune regulation while maintaining physiological homeostasis. An abnormal gut microbiota is related to pathogenic processes and various gut, metabolic, mental, and neurological diseases. Additionally, pet dogs at risk of disease affect the health of their owners. Therefore, this review discusses the composition and diversity of the gut microbiota of dogs and the relationships between the gut microbiota and diseases.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.4
• /
• pp.527-533
• /
• 2011

Decomposition of compost applied to soils is affected basically by its biological stability; but, many other chemical properties of the compost may also influence compost organic-C mineralization. This study was conducted to investigate the principal substrate quality factors of composts that determine C mineralization of compost with similar stability degree (SD). Three composts samples with similar SD but different chemical properties such as pH, C/N, $K_2SO_4$-extractable C, and molar ratio of $NH_4^+$ to $NO_3^-$ were mixed with an acid loamy soil and $CO_2$ emission was monitored during the laboratory incubation for 100 days. Temporal pattern of cumulative compost organic-C mineralization expressed as % of total organic C ($C_{%\;TOC}$) followed double exponential first order kinetics model and the $C_{%\;TOC}$ ranged from 4.8 to 11.8% at the end of incubation. The pattern of C%TOC among the composts was not coincident with the SD pattern (40.1 to 58.6%) of the composts; e.g. compost with the lowest SD resulted in the least $C_{%\;TOC}$ and vice versa. This result indicates that SD of compost can not serve as a concrete predictor of compost mineralization as SD is subject not only to maturity of compost but also to characteristics of co-composting materials such as rice hull (low SD) and sawdust (high SD). Meanwhile, such pattern of $C_{%\;TOC}$ collaborated with pH, C/N, $K_2SO_4$-extractable C, and molar ratio of $NH_4^+$ to $NO_3^-$ of the composts that are regarded as chemical indices of the progress of composting. Therefore, for better prediction of compost mineralization in soils, it is necessary to consider both SD and other chemical indices (pH, C/N, and molar ratio of $NH_4^+$ to $NO_3^-$).

• Journal of Adhesion and Interface
• /
• v.13 no.4
• /
• pp.171-181
• /
• 2012

The demand characteristics of the conventional 12 kinds of epoxy resins which have been used for restoration of the ceramic relics were investigated to provide standards of the effective materials in this study. The result of durability analysis showed that a liquid type is more effective in ceramic relics (low damage, high strength), and a paste type is more effective in earthenware relics (high damage, low strength). The result of workability analysis appears that the liquid type is higher than the paste type, and a slow curing type is higher than a fast curing type in surface hardness. Therefore, in the case of the liquid type which is hard to reprocess due to high surface hardness, it is necessary to conduct a study on improving physical properties by adding filler. The result of the gloss analysis on epoxy resins showed that the liquid type (colorless) has higher gloss than the paste type, and the slow curing type has higher gloss than the fast curing type in liquid types. CDK-520A/520B and Araldite SV 427-2/HV 427-1 showed the most similar gloss to $700^{\circ}C$ earthenware, Devcon 5 minute, EPO-TEK 301-2, and Quik Wood showed the most similar gloss to celadon and whiteware, Quik Wood, EPO-TEK 301-2, and Devcon 5 minute showed the most similar gloss to buncheongware. It is necessary for conservator to decide the range of the restoration surface by predicting the increase and decrease of the restoration surface because most of the epoxy resins caused the volume change in curing process.

• Journal of Conservation Science
• /
• v.37 no.1
• /
• pp.63-76
• /
• 2021

The purpose of this study is to scientifically analyze physicochemical characteristics of the roof tiles used for palaces in the Joseon Dynasty which stored in Changdeokgung material storage and Seooreung Jaesil and the modern handmade ones which made by N company to understand the differences between their manufacturing techniques. Through chromaticity, cross-sectional observation, component analysis, and crystal structure analysis, it was possible to confirm the physicochemical properties and fired properties of the roof tile. Roof tiles from the Joseon Dynasty have a wider colorimetric range and higher apparent porosity and water absorption, on average, than the modern roof tiles. The cross section of the Joseon Dynasty roof tiles shows that most clay minerals have not been vitrified, remaining in the form of atypical particles, while the modern roof tiles have denser clay materials. X-ray diffraction analysis identified low-temperature minerals such as micas in Joseon roof tiles but no peak of these minerals was observed in the modern roof tiles, implying that the modern ones are fired at higher temperature than the Joseon ones. Therefore, the modern roof tiles are fired at higher temperature and have higher density than the Joseon ones due to the use of pugmills. The general content of main ingredients was similar between the two. Additionally, the principal component analysis of trace elements in the Joseon roof tiles showed that most samples were from similar areas. It seems that the Joseon roof tiles were manufactured using soils supplied from a specific region at the same timeframe and their consistency in the content of principal components implies that they also have similar mix proportions of clay.

• Korean Journal of Clinical Laboratory Science
• /
• v.50 no.4
• /
• pp.525-534
• /
• 2018

This study evaluated the various qualifications that can be linked to employment similar to the medical laboratory technology major. The qualifications for employment outside the medical laboratory technology major are industrial health instructor, doping control officer, audiologist, sign language interpreter, health education specialist, claim adjuster, Korea life underwriter, administrative manager, hospital administrator, insurance review manager, and hospital coordinator. The qualifications for employment similar to the medical laboratory technology major include the clinical research coordinator, clinical research associate, anatomist, analytical chemistry analysts, hazardous materials industry engineers, biotechnologist, biosafety managers, biotechnology technicians, medical device quality officers, animal care nurse, industrial engineer hazardous material, bioprocess engineer, biosafety officer, certified technology consultant, director of medical device quality control, laboratory animal technician, animal nursing technician, and cruise medical manager. Therefore, it is necessary to conduct a social analysis survey of the various qualifications currently held by medical technologists. In addition, it will be necessary to investigate the current status of medical technologists working in other fields. In the future, medical technologists should expand the scope of their work through efforts to strengthen their individual work capacity, share cases, and strengthen their expertise.