• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.96-102
• /
• 2006

Because of the increasing need to use clayey soil as the backfill in reinforced soil structures and embankment material, nonwoven geotextiles with the drain capability have been receiving much attention. However, there are few studies of the deformation behavior of nonwoven geotextiles at geosynthetics reinforced soil structures in the field because the nonwoven geotextile, which has low tensile stiffness and higher deformability than geogrids and woven geotextiles, is difficult to measure its deformation by strain gauges and to prevent the water from infiltrating. This study proposes a new, more convenient method to measure the deformation behaviour of nonwoven geotextile by using a strain gauge; and examines the availability of the method by conducting laboratory tests and by applying it on two geosynthetics reinforced soil (GRS) walls in the field. A wide-width tensile test conducted under confining pressure of 7kPa showed that the local deformation of nonwoven geotextile measured with strain gauges has a similar pattern to the total deformation measured with LVDT. In the field GRS walls, nonwoven geotextile showed a larger deformation range than the woven geotextile and geogrid; however, the deformation patterns of these three reinforcement materials were similar. The function of strain gauges attached to nonwoven geotextile in the walls works normally for 16 months. Therefore, the method proposed in this study for measuring nonwoven geotextile deformation by using a strain gauge proved useful.

• The Journal of Advanced Prosthodontics
• /
• v.9 no.1
• /
• pp.57-66
• /
• 2017

PURPOSE. Cementation failures of restorations are frequently observed in clinical practice. The purpose of this study is to compare the effect of initial and repeated bonding on the bond strengths of different resin cements to enamel and dentin. MATERIALS AND METHODS. Ninety human maxillary central incisors were bisected longitudinally. The 180 tooth halves were divided into 2 groups (n = 90) for enamel and dentin bonding. The enamel and dentin groups were further divided into 3 groups (n = 30) for different resin cement types. Composite resin (Filtek Ultimate) cylinders ($3{\times}3\;mm$) were prepared and luted to enamel and dentin using Variolink II (Group V), RelyX ARC (Group R), or Panavia F 2.0 (Group P) resin cement. After 24 hours, initial shear bond strengths of the resin cements to enamel and dentin were measured. Using new cylinders, the specimens were de-bonded and re-bonded twice to measure the first and the second bond strengths to enamel and dentin. Failure modes and bonding interfaces were examined. Data were statistically analyzed. RESULTS. Initial and repeated bond strengths to enamel were similar for all the groups. The first ($15.3{\pm}2.2\;MPa$) and second ($10.4{\pm}2.2\;MPa$) bond strengths to dentin were significantly higher in Group V (P<.0001). Second bond strengths of dentin groups were significantly lower than initial and first bond strengths to dentin (P<.0001). CONCLUSION. All resin cements have similar initial and repeated bond strengths to enamel. Variolink II has the highest first and second bond strength to dentin. Bond strength to dentin decreases after the first re-bonding for all resin cements.

• The Journal of Advanced Prosthodontics
• /
• v.9 no.6
• /
• pp.423-431
• /
• 2017

PURPOSE. The goal of this study was to evaluate the fracture resistances of various monolithic crowns fabricated by computer-aided design and computer-aided manufacturing (CAD/CAM) with different thickness. MATERIALS AND METHODS. Test dies were fabricated as mandibular molar forms with occlusal reductions using CAD/CAM. With different occlusal thickness (1.0 or 1.5 mm), a polymer-infiltrated ceramic network (Enamic, EN), and zirconia-reinforced lithium silicate (Suprinity, SU and Celtra-Duo, CD) were used to fabricate molar crowns. Lithium disilicate (e.max CAD, EM) crowns (occlusal: 1.5 mm) were fabricated as control. Seventy crowns (n=10 per group) were bonded to abutments and stored in water for 24 hours. A universal testing machine was used to apply load to crown until fracture. The fractured specimens were examined with a scanning electron microscopy. RESULTS. The type of ceramics and the occlusal thickness showed a significant interaction. With a recommended thickness (1.5 mm), the SU revealed the mean load similar to the EM, higher compared with those of the EN and CD. The fracture loads in a reduced thickness (1.0 mm) were similar among the SU, CD, and EN. The mean fracture load of the SU and CD enhanced significantly when the occlusal thickness increased, whereas that of the EN did not. CONCLUSION. The fracture loads of monolithic crowns were differently influenced by the changes in occlusal thickness, depending on the type of ceramics. Within the limitations of this study, all the tested crowns withstood the physiological masticatory loads both at the recommended and reduced occlusal thickness.

• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.6
• /
• pp.761-769
• /
• 1999

In this paper the effect of aging heat treatment to the Corrosion behavior for the Nimonic 80A superalloy was studied by AC Impedance methods. Tested solution was 3.5% with tempera-ture $25^{\circ}C$ Electro-chemical corrosion test were carried out for the Nimonic 80A super-alloy which solution heat treated at $1080^{\circ}C$ for 8 hours followed by aging heat treated at $650^{\circ}C,\;700^{\circ}C,\;750^{\circ}C\;800^{\circ}C$ and $850^{\circ}C$ with 16hours under vacuum environment. The obtained results were as follows; 1. Base metal and solution-treated materials were exhibited similar corrosion tendency as Ran-dle equivalent cell. The value of passive film resistance was 579 ohms for the base metal and 124,770 ohms for the solutionized metal such a difference was arose by the ${{\gamma}_^'}$ precipitate on the metal surface during heat treatment. 2. The measure value of $R_p$ for heat-treated at $650^{\circ}C,\;700^{\circ}C,\;800^{\circ}C$and $850^{\circ}C$ were 97,943, 93, 111, 26,961, 15,798 and 11,780ohm respectively. Which indicated that the passive film resistance Rp was reduced as aging temperature increased due to the growth of grain size and sensitization at the grain boundary. 3. The similar tendency was exhibited for corrosion behavior of the electro-chemical corrosion polarization method and AC impedance method and confirmed that AC impedance method was useful tool for corrosion research.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.12
• /
• pp.6415-6421
• /
• 2012

Background: Canine mammary gland tumors (CMGTs) are the most common tumor found in bitches. Changes in HER-2/neu genes in human breast cancer (HBC) lead to decrease in disease-free survival (DFS) and overall survival rate (OSR). Previous studies have demonstrated that the biological behavior of malignant mammary gland tumors (MMGTs) is similar to that of HBC. The present study aimed at evaluating the relationship between overexpression of HER-2/neu and clinicopathological features in MMGTs to represent a model of prognostic factors for HBC. Materials and Method: The clinicopathological data of 35 MMGTs were obtained. Immunohistochemical staining with HER-2, Ki-67 and CD34 markers was conducted with sections from paraffin-embedded blocks. According to standard protocols, histological type, grade, margin status, lymphovascular invasion (LVI), HER-2/neu score, proliferation rate and microvessel density (MVD) of tumors were determined and the association of HER-2/neu overexpression with these parameters was assessed statistically. Results: The IHC results showed that 12 (34.3%) cases were HER-2/neu positive. Statistical analyses indicated a significant relationship between HER-2 positivity and tumor grade (p=0.043), which also was demonstrated with cancer stage (p=0.035), tumor margin involvement (p=0.016), proliferation index (p=0.001) and MVD (p=0.001); however, there was no statistical relationship between LVI and tumor size. Overexpression of the HER-2/neu gene in MMGTs results in similar biological behavior as that of HBC; as a result, these tumors have can be considered to have important similarities in clinicopathological characteristics. Conclusions: MMGTs can be regarded as an HBC animal model. Further studies in this field would result in new treatments that could be beneficial for both dogs and humans.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.11
• /
• pp.6709-6714
• /
• 2013

Background: Breast cancer is a leading cause of death in women. The available chemotherapy drugs have been associated with many side effects. Bromelain has novel medicinal qualities including anti-inflammatory, anti-thrombotic, fibrinolytic and anti-cancer functions. Commercially available bromelain is obtained through tedious methods; therefore, recombinant bromelain may provide a cheaper and simpler choice with similar quality. Materials and Methods: This study aimed to assess the effects of commercial and recombinant bromelain on the cytokinetic behavior of MCF-7 breast cancer cells and their potential as therapeutic alternatives in cancer treatment. Cytotoxic activities of commercial and recombinant bromelain were determined using (sulforhodamine) SRB assay. Next, cell viability assays were conducted to determine effects of commercial and recombinant bromelain on MCF-7 cell cytokinetic behavior. Finally, the established growth kinetic data were used to modify a model that predicts the effects of commercial and recombinant bromelain on MCF-7 cells. Results: Commercial and recombinant bromelain exerted strong effects towards decreasing the cell viability of MCF-7 cells with $IC_{50}$ values of 5.13 ${\mu}g/mL$ and 6.25 ${\mu}g/mL$, respectively, compared to taxol with an $IC_{50}$ value of 0.063 ${\mu}g/mL$. The present results indicate that commercial and recombinant bromelain both have anti-proliferative activity, reduced the number of cell generations from 3.92 to 2.81 for commercial bromelain and to 2.86 for recombinant bromelain, while with taxol reduction was to 3.12. Microscopic observation of bromelain-treated MCF-7 cells demonstrated detachment. Inhibition activity was verified with growth rates decreased dynamically from 0.009 $h^{-1}$ to 0.0059 $h^{-1}$ for commercial bromelain and to 0.0063 $h^{-1}$ for recombinant bromelain. Conclusions: Commercial and recombinant bromelain both affect cytokinetics of MCF-7 cells by decreasing cell viability, demonstrating similar strength to taxol.

• The Journal of Korean Association of Computer Education
• /
• v.14 no.1
• /
• pp.55-67
• /
• 2011

Due to recent various online problems, the necessity of information security education has increased. The information security education was strengthened thanks to the informatics curriculum of middle school in 2007, but the educational fields lacked detailed educational materials that could be utilized. Thus to give appropriate information security education for elementary and middle school students, this research developed an unplugged activity for them. The activity was designed by applying Lickona's integrated ethical model and design patterns of unplugged activities, and developed through expert's review and pilot tests targeted to elementary school students. Developed activity was applied to 21 middle school students and the usability was evaluated. As results, first, the activity showed similar expectations from the previous activities. Second, persistence was also similar or higher compared to the previous activities, so the activity developed from this research secured the minimum usability. The unplugged activity developed from this research would give implications in producing various educational contents for information security education.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.5
• /
• pp.639-646
• /
• 2004

Metal treated activated carbons are prepared using various metals. Adsorption behaviors, morphologies, as well as antibacterial effects of metal treated samples are compared before and after solvent washing. Adsorption isotherms are used to characterize the porous structure of metal treated activated carbons before and after the solvent washing with acetone or ethyl alcohol. From these data, it is noticed that the changes in physicochemical properties of metal treated activated carbons depend on the solvents employed. Similar results are observed from BET data obtained from nitrogen adsorption isotherms. From scanning electron microscopy (SEM) studies, the changes in shape and size of metal particles are observed after the samples are washed with solvents. These changes result in different blocking effects, which, in turn, affect the adsorption behavior of metal treated activated carbons. X-ray diffraction (XRD) patterns of the samples treated with different metals are different each other. High intense sharp peaks attributed to metals are observed from silver treated samples, while the peaks are not observed from copper treated samples. To compare thermodynamic behavior of metal treated activated carbons washed with different type of solvents, differential scanning calorimetric (DSC) analysis is carried out. The analysis shows similar endothermic curves for all of the samples. Finally, antibacterial effects of metal treated activated carbon against Escherichia coli are discussed. Comparing the effects among the metals employed, highest effects are obtained from Cd, while lowest effects are obtained from Cu. Antibacterial activity becomes higher with the increase of the amount of metals treated, Optimum concentrations of metals to treat activated carbons, obtained from a shake flask test, are known to be 0.4, 0.1, and 0.6 moles for Ag, Cd, and Cu, respectively.

• Economic and Environmental Geology
• /
• v.29 no.5
• /
• pp.561-573
• /
• 1996

The igneous rocks in the Goseong area, the southwestern part of the Gyeongsang basin, are composed of the volcanic rocks, Bulgugsa granites and intrusive andesites. The volcanic rocks are andesitic lapilli tuff, dacite and rhyolite. The granites are mainly of hornblende-biotite granite and intruded into the sedimentary basement and the volcanic rocks. The intrusion of andesitic dyke is thought to be the latest igneous activity in the area. In the variation diagrams of the major oxides, the three igneous rock types show different variational trends, indicating that they were from the different magmatic pulses. K-Ar radiometric ages suggest that the igneous activity in the Goseong area had occurred during late Cretaceous period. The ages of the volcanic rocks seem likely to have become younger due to the thermal effect by the granitic intrusion. The major element compositoinal variation of the granites from the Goseong area are compared with those from the Jindong, Geoje and Masan areas. By the comparison, it is easily understood that the Jindong granites are fairly different from the other three granites. On the other hand, the Goseong, Geoje and Masan granites generally show similar variational trends with each other, suggesting that they are of similar genetic origin. Combining the similarity of the geochemical features and the difference of the intruding ages between the Goseong and Masan granites, it seems like that the magma generation from the same source materials had occurred at a temporal interval.

• Journal of the Korean Society of Physical Medicine
• /
• v.8 no.1
• /
• pp.19-27
• /
• 2013

PURPOSE: The purpose of this study is to look into relationship between image of physiotherapist and self-esteem of physiotherapy students and desirable image of physiotherapists offer to establish basic materials. METHODS: The subjects of this study are consist of 603 students of department of Physical therapy university and college in Busan and Kim-hae. Data are collected from June 9 to July 9 in 2011 by structured questionnaires. RESULTS: The result are as follows. 1. at the physiotherapist image score, the highest score question is "Physiotherapist is specialist"(3.45) and the lowest score question is "Physiotherapist is treated samely with doctor"(2.15). 2. at the self-esteem score, the highest score question is "I think that I am at least as valuable as others"(3.37) and the lowest score question is "I can be poorly sometimes"(2.81). 3. at the static results of physiotherapist image score gap by general characteristics, there are significantly different in gender(t=2.27, p=.02), similar profession distinction(t=4.30, p=.00), major satisfaction(t=5.74, p=.00), school system (t=-2.54, p=.01). 4. at the static results of self-esteem score gap by general characteristics, there are significantly different in years (f=5.14, p=.00), gender(t=4.09, p=.00), religion(f=2.87, p=.04), similar profession distinction(t=3.97, p=.00), major satisfaction(t=4.26, p=.00). 5. at the static results of good reputation of physiotherapists increase self-esteem of physiotherapy students score question are significantly different(r=0.53, p=.00). CONCLUSION: Accordingly, these results of this study that there is a very correlation between image of physiotherapist and self-esteem of physiotherapy students. Therefore, good reputation of physiotherapists increase self-esteem of physiotherapy students.