• Journal of the Korean Geographical Society
• /
• v.44 no.4
• /
• pp.463-480
• /
• 2009

The weathering properties and provenance of loess-paleosol sequence deposited on gravel layer of river terrace in Bongdong-eup, Wangju-gun, Jeonbuk Province are examined using soil analysis, magnetic susceptibility measurement, grain size and element analysis. The Bongdong section consists of, from top to bottom, Layer 1(paleosol), Layer 2(loess), Layer 3(paleosol) and the gravel layer of river terrace. The magnetic susceptibility values show the systematic variations in the sequence and the results of grain size analysis reveal that the sequence was deposited by not fluvial or slope process, but eolian process, and that contains finer materials than the Daecheon loess and Chinese Loess Plateau. Among the results of soil analysis, organic contents indicate systematic variations similar to the magnetic susceptibility. The wet soil colors further reflect the characteristics of the sequence rather than the dry soil colors. Based on the analytical results of major and rare earth elements, the eolian materials contained in the sequence were deposited by the materials originated from the areas where the Chinese Loess Plateau has been originated or the reworked materials from the Chinese Loess Plateau, and after the depositions, the materials experienced the intensive chemical weathering under the humid-warm climatic conditions in the Korean Peninsula.

• Carbon letters
• /
• v.11 no.4
• /
• pp.279-284
• /
• 2010

Graphene is one of the most promising materials for many applications. It can be used in a variety of applications not only as a reinforcement material for polymer to obtain a combination of desirable mechanical, electrical, thermal, and barrier properties in the resulting nanocomposite but also as a component in energy storage, fuel cells, solar cells, sensors, and batteries. Recent research at Michigan State University has shown that it is possible to exfoliate natural graphite into graphite nanoplatelets composed entirely of stacks of graphene. The size of the platelets can be controlled from less than 10 nm in thickness and diameters of any size from sub-micron to 15 microns or greater. In this study we have investigated the influence of melt compounding processing on the physical properties of a polyamide 6 (PA6) nanocomposite reinforced with exfoliated graphite nanoplatelets (xGnP). The morphology, electrical conductivity, and mechanical properties of xGnP-PA6 nanocomposite were characterized with electrical microscopy, X-ray diffraction, AC impedance, and mechanical properties. It was found that counter rotation (CNR) twins crew processed xGnP/PA6 nanocomposite had similar mechanical properties with co-rotation (CoR) twin screw processed or with CoR conducted with a screw design modified for nanoparticles (MCoR). Microscopy showed that the CNR processed nanocomposite had better xGnP dispersion than the (CoR) twin screw processed and modified screw (MCoR) processed ones. It was also found that the CNR processed nanocomposite at a given xGnP content showed the lowest graphite X-ray diffraction peak at $26.5^{\circ}$ indicating better xGnP dispersion in the nanocomposite. In addition, it was also found that the electrical conductivity of the CNR processed 12 wt.% xGnP-PA6 nanocomposite is more than ten times higher than the CoR and MCoR processed ones. These results indicate that better dispersion of an xGnP-PA6 nanocomposite is attainable in CNR twins crew processing than conventional CoR processing.

• Korean Parent-Child Health Journal
• /
• v.8 no.1
• /
• pp.49-63
• /
• 2005

Purpose: The present study is a descriptive research on the content of sex education conducted at home by the mothers of young children who are attending five kindergartens located in Busan, Korea. This study aims to provide basic materials for systematic sex education at home and in the school. Method: Based on the literature review and prior researches, the writer made a questionnaire consisting of 30 items regarding necessities, contents and difficulties of sex education. The 307 questionnaires were collected out of 480 which were distributed by the kindergarten teachers. Data was analysed with frequency and percentage using the SPSS Win 10.0 Program. The main subjects of the study were mothers in their thirties, who understood the necessity of sex education. However, they were lack of enough sexual knowledge in accordance with the transforming sexual culture and lack of suitable materials. They did not plan to educate their children according to their developmental stages, but just taught them verbally rather than using common materials for the situation. Result Regarding the origin of life that children often asks, mothers did not give a scientific and correct response to satisfy their curiosity about sex, saying that a baby was created after marrying a loved one. While more mothers than the prior research responded correctly to the queries of the path of delivery, some mothers did not. It may cause some children to suppress the questions, which may result a distorted sexual knowledge. That is because mothers understood that sex education was to deliver sexual knowledge, but not realized that sex education was a human education carried out throughout life. Mothers fell short of sexual knowledge, capability, and confidence, comparing with swift social changes and children's capacity. As a result, it is necessary to inspire sexual awareness into mothers and educate them through training. It is also needed to secure a training program similar to a teacher training program. Conclusion: It is essential to develop and to provide evaluation tools as well as proper materials in accordance with the children's developmental stage, so that organic management system among home, education institute and society must lead sex education Further, it is necessary to provide teaching methods and materials to mothers regularly, so that the school and home may conduct sex education together to cope with difficulties.

• Conservation Science in Museum
• /
• v.6
• /
• pp.55-66
• /
• 2005

Three types of epoxy resins (Epo-Tek 301, Araldite 103, and Araldite 106) and three types of pigments (bunche, pastel, and conté), which are materials for porcelain restoration, were selected as examination materials. The tone change, porosity, and sedimental resulting from the mixtures of varying ratios of these three materials were observed. Samples were also made from the mixture of Epo-teck 301, four kinds of white pigments, and six types of fillers and subjected to ultraviolet ray penetration for 200 hours to observe the oxidation of the epoxy resins. The result showed that the chemical composition of pastel drastically changed when mixed with Epo-tek 301. Although bunche and conté displayed clear colors, those of conté were less clear when it was mixed with other substances. Adding a small amount of Epo-tek 301 tended to be driven into the corner, whereas mixing a large amount caused saturation and boiling. On the other hand, AW 106 did not display clear colors owing to its high viscosity; when mixed in large amounts, however, the clarity of colors improved. For AY 103, a similar standard of color clarity was maintained regardless of the mixture ratio. The following was ranked according to the level of porosity: [Pastel>bunche≒conté]. In terms of sedimentary, however, [bunche>conté>Pastel], [Epo-tek 301> AY 103> AW 106]. The result of measuring the degree of yellowing revealed that titanium, pastel, silicon dioxide, and kaolin tended to turn yellow, whereas bunche, conté, diatomaceous earth, and calcium hydroxide tended to resist yellowing.

• 한국문화재보존과학회:학술대회논문집
• /
• 2004.10a
• /
• pp.15-24
• /
• 2004

The Seokgatap pagoda composed of mainly alkali granite and other minor pink-feldspar granite, fine-grained granite, granodiorite, diorite, gabbro, and tuff. Despite the small loss and damage derived from joints, its peel-off and exfoliation are serious enough to cause the heavy deterioration on the stone surface. The chemical and petrological weathering has partly replaced the original rock-forming minerals with clay minerals and iron oxyhydroxides. Based on the petrogenesis, rock materials of the pagoda is very similar to rocks of Dabotap pagoda and the Namsan granite in the Gyeongju. The central fart of the pagoda has sunken highly, which caused all the corners to split and the structural transformation to become worse. The reverse V-shaped gaps between the materials have broken stones filled in a coarse way. The iron plates inserted between the upper flat stone laid on other stones and tile pagoda body in the north and east side has been exposed in the air and corroded, discoloring of the adjacent stones. The overall diagnosis of the Seokgatap pagoda is the deteriorated functions of the stone materials, which calls for a long-term monitoring and plans to reinforce the stone surfaces. But the main body including the pagoda roof stone needs washing on a regular basis, and the many different cracks should be fixed with glue by using the fillers or hardeners designed for stone cultural properties after removing the cement mortar. In case of the replacement of the stone materials with new stones, it's necessary to examine the pagoda for the center of gravity and support intensity of the materials. The structural stability of the pagoda can be attained by taking a reinforce measure in geotechnical engineering and making a drainage. The ground humidity, which has aggravated weathering and structural instability, should be resolved by setting up a humidity reduction facility. The contamination of lichens and bryophyte around the pagoda and on the surface is serious. Thus biochemical treatments should be given too in order to prevent further biological damages and remove the vegetation growing on the discontinuous planes.

• Restorative Dentistry and Endodontics
• /
• v.24 no.4
• /
• pp.585-603
• /
• 1999

Esthetic availabilities used as an esthetic restorative maternals can be determined by the optical coincidence among materials, enamel and dentin. Enamel is highly translucent. That's why esthetic materials need to correspond the close translucency of enamel. But the translucent materials are affected by the background color. So it should be predicted that the color of estorative materials depend on the any thickness and the spectral reflectance of the background on which they are placed. The object of this investigation, under above hypothesis, was to determine and analyze how they affect the final color according to the thickness, translucency and background color (white, black and dentin) fill three commercial light cured composite resins(Charisma, Spectrum TPH and Z100). And correlation was analyzed to find out the possibility of the prediction when using the certain background color and thickness of materials. Followings are the result 1. The I shade of CHA showed the lowest contrast ratio($Co_7$) while the B3 shade of Z100 showed the highest contrast ratio(p<0.05). 2. The value of $L^*$ and $b^*$ on the white and dentin background is increased with decreasing thickness. And there are significant relationships between increasing thickness and each value(R>0.085). But there is a little change of $L^*$ and $b^*$ value on the black background regardless of the thickness(p>0.05). 3. For the $a^*$ value, there was little difference in values as a function of thickness and changed irregularly regardless of thickness in all background. 4. The pattern of increasing value of $L^*$ and $b^*$ with decreasing thickness was similar to the group of white and dentin background. In both dentin one showed lesser change of value. 5. The values of $L^*a^*b^*$ measured on the different background with same thickness showed the recognizable color difference(${\Delta}E^*$>2) when the thickness was below 2.6mm. 6. Contrast ratio was increased with increasing thickness with significant relationship (R>0.9). 7. Spectral reflectance of composite resins that calculated from Kubelka-Munk equation was showed little difference compared with observed value w1th decreasing thickness.

• Journal of the Korean Society for Railway
• /
• v.17 no.4
• /
• pp.251-259
• /
• 2014

The transition zone between an earthwork and a bridge effect to the vehicle's running stability because support stiffness of the roadbed is suddenly changed. The design criteria for the transition structure on ballast track were not particular in the past. However with the introduction of concrete track is introduced, it requires there is a higher performance level required because of maintenance and running stability. In this present paper, a transition structure reinforced with geosynthetics is suggested to improve the performance of existing bridge-earthwork transition structures. The suggested transition structure, in which there is reinforcing of the approach block using high-tension geosynthetics, has a structure similar to that of earth reinforced abutments. The utilized backfill materials are cement treated soil and gravel. These materials are used to reduce water intrusion into the approach block and to increase the recycling of surplus earth materials. An experiment was performed under the same conditions in order to allow a comparison of this new structure with the existing transition structure. Evaluation items are elastic displacement, cumulative settlement, and earth pressure. As for the results of the real-scale accelerated testing, the suggested transition structure has excellent performance for the reduction of earth pressure and settlement. Above all, it has high resistance the variation of the water content.

• Journal of the Korean Electrochemical Society
• /
• v.16 no.3
• /
• pp.169-176
• /
• 2013

Solid state lithium oxide compounds of layered structure, which has high stability of structure, are mainly used as the cathode materials in lithium-ion batteries (LIBs). Recently, the investigation of Solid Electrolyte Interphase (SEI) between active materials and electrolyte has been focusing to improve the performance of lithium-ion batteries. For the investigation of the SEI, the study of surface properties of cathode materials and anode materials is also required in advance. $LiNiO_2$ and $LiCoO_2$ are very similar layered structure of cathode active materials and representative solid state lithium oxide compounds in LIBs. Various experimental and theoretical studies have been doing for $LiCoO_2$. The theoretical investigation of $LiNiO_2$ is not sufficient, however, even if experimental studies of $LiNiO_2$ are enough. In this study, the surface energies of nine facets of $LiNiO_2$ crystal facets were calculated by Density Functional Theory. In XRD data of $LiNiO_2$, (003), (104), (101), et al. facets are main surfaces in order. However, the results of calculation are different with XRD data. Thus, both (104) and (101) facets, which are energetically stable and measured in XRD, are mainly exposed in the surface of $LiNiO_2$ and it is expected that intercalation and de-intercalation of Li-ion will be affected by them.

• Korean Journal of Materials Research
• /
• v.10 no.10
• /
• pp.665-670
• /
• 2000

Linear annealing method was developed to increase the bond strength of Si wafer pair mated at room tem­perature instead of conventional furnace annealing method. It has been known that the interval of the two mating wafer surfaces decreases and the density of gaseous phases generated at the interface increases with increase in an-nealing temperature. The new annealing method consisting of one heat source and light reflecting mirror used these two phenomena and was applied to Si$\mid$$\mid$Si and Si$\mid$$\mid$$SiO_2/Si$ bonding. The bonding interface observed directly by using IR camera and HRTEM showed clear bonding interface without any unbonded areas except the area generated by the dusts inserted into the mating interface at the room temperature. Crack opening method and direct tensile test was ap­pplied to measure the bond strength. The two methods showed similar results. The bond strength increased continuous­tly with the increase of annealing temperature.

• Korean Journal of Materials Research
• /
• v.9 no.12
• /
• pp.1234-1239
• /
• 1999

Electromagnetic wave asorbing properties of the $Ni_{0.5}-Zn_{0.4}-X_{0.1}{\cdot}Fe_2O_4$, where X was replaced by substitution elements Cu, Mg, Mn, have been studied. The structure, shape, size and magnetic properties of the $Ni_{0.5}-Zn_{0.4}-X_{0.1}{\cdot}Fe_2O_4$ were analyzed by XRD, SEM, VSM. The relative complex permittivity, permeability, and electromagnetic wave absorbing properties were measured by Network Analyzer. The structure, shape, size and magnetization value of the $Ni_{0.5}-Zn_{0.4}-X_{0.1}{\cdot}Fe_2O_4$ were found to be similar in spite of substitution elements. The coercive force and hysteresis-loss showed maximum value when Mg was substituted for X. The dielectric loss(${\varepsilon}_r"/{\varepsilon}_r'$) was found to be maximum value when Mn was substituted for X. Also the magnetic loss(${\mu}_r"/{\mu}_r'$} was found to be maximum with Cu substitution. The electromagnetica wave absorbing property of the $Ni_{0.5}-Zn_{0.4}-X_{0.1}{\cdot}Fe_2O_4$-Rubber composite with 4mm thickness was excellent as over - 40dB at 9GHz, and the $Ni_{0.5}-Zn_{0.4}-X_{0.1}{\cdot}Fe_2O_4$-Rubber composite with 8mm thickness was over-40dB at 2GHz. Those composites also showed superior microwave absorbing properties.