• 연구논문집
• /
• s.25
• /
• pp.23-29
• /
• 1995

Steering column is a typical component that may injure the driver at a frontal collision accident. To protect the driver from an impact, it is very important to study the impact absorbing behaviour of steering column. The dynamic simulation were performed for the ball sleeve type impact absorbing steering column. The simulation results show similar trends to FMVSS 203 test results. Hence using the simulation program developed in this study, it is possible to predict dynamic response of steering system which is used in design modification. Impact absorbing performance of the ball sleeve type steering column with the column angle of $21^\circC$ and $26^\circC$ satisfies the safety criterion of FMVSS 203.

• 연구논문집
• /
• s.25
• /
• pp.185-192
• /
• 1995

The solid/liquid interface migration in Nb-doped $SrTiO_3$ and its effect on dielectric properties have been investigated. The specimen sintered in air shows no migration during oxide infiltration treatment in air, whereas the specimen sintered in $5H_2-95N_2$ shows appreciable migration during similar infiltration. In the migrated layers of the specimen sintered in a reducing atmosphere, no cations of the infiltrants are detected by wavelength dispersive spectroscopy. These results show that nonstoichiometry due to the atmosphere change can induce the interface migration as in the case of frequently observed migrations due to solute concentration change. The driving force for the migration is discussed in terms of the coherency strain energy in a thin diffusional oxidized layer of the receding grain. The interface migration caused by nonstoichiometry could be suppressed by preoxidizing grain surfaces before oxide infiltration treatment. The suppression of migration increased the effective dielectric constant of the material.

• 연구논문집
• /
• s.26
• /
• pp.85-94
• /
• 1996

The purpose of this study is to bring out the optimal design factors which effect on dynamic characteristics in the design of proportional flow control valve with high response characteristics, and to verify the validity of the design factors. In this study, force feedback type flow control valve with nozzle-flapper is studied. And, the influences which fixed orifice, nozzle diameter, and maximum displacement between nozzle and flapper effect on dynamic characteristics are analyzed. We have done simulations using the optimal design factors and simulink(Matlab) as a simulation tool, and verified the validity of our simulations by means of comparison our simulation results with an experimental results of another similar valve.

• 연구논문집
• /
• s.26
• /
• pp.43-50
• /
• 1996

Present paper describes on/off design performance analysis of an 74KW industrial turboshaft gasturbine engine. Procedures to match between the compressor, combustor and turbine have been incorporated into the developed program satisfying compatibility requirement of flow and work and ratational speed. The validity of the performance results from the developed program are yet to be proved through performance experiments of the resultant engine, but comparison of the present results with those from "GASCAN(Thermoflow:America) under similar mass inlet flow, pressure ratio, and speed condition show good agreement despite present results underpredict 6-10% for power and up to 3% in efficiency, respectively.

• Kyungpook Mathematical Journal
• /
• v.54 no.3
• /
• pp.501-509
• /
• 2014

In 2000, K. Denecke and K. Mahdavi showed that there are many idempotent elements in $Hyp_{N_{\varphi}}(V)$ the set of normal form hypersubstitutions of type ${\tau}=(2)$ which are not idempotent elements in Hyp(2) the set of all hypersubstitutions of type ${\tau}=(2)$. They considered in which varieties, idempotent elements of Hyp(2) are idempotent elements of $Hyp_{N_{\varphi}}(V)$. In this paper, we study the similar problems on the set of all generalized hypersubstitutions of type ${\tau}=(2)$ and the set of all normal form generalize hypersubstitutions of type ${\tau}=(2)$ and determine the order of normal form generalize hypersubstitutions of type ${\tau}=(2)$.

• Macromolecular Research
• /
• v.11 no.3
• /
• pp.198-201
• /
• 2003

Aqueous emulsion of polyurethane (PU) ionomers were reinforced with hydrophobic nanosilica to give composites. The aqueous emulsion was stable and the particle size increased as the content of hydrophobic nanosilica was increased. The reinforcing effect of nanosilica in mechanical properties of these composites were examined by dynamic mechanical and tensile tests, and the Shore A hardness was measured. Enhanced thermal and water resistance and marginal reduction in transparency of these composites were observed compared with pristine polymer. These results were similar with those of our previous studies on waterborne PU/organoclay nanocomposites.

• Korean Journal of Microbiology
• /
• v.15 no.2
• /
• pp.77-84
• /
• 1977

The yeast population on 14 species of seaweeds and in water estimated by cultural mothods over a 5-month period in south-west in Korea, Nine species of yeasts, comprising unidentified one, and one of yeast-like fungi were identified. Fifty phycase were attributed to the difference of cultural method between the present work and earlier repoeters and, to some exent, the higher number of Rhodotorula glutinis which had a prior adaptation to the release of inhibitory polyphenolic materials. Although, to what extent, all division of algae showed a similar variation in yeast population, correlated with month, the rapid decrease of yeast population in August seems to be the cause of exposure of heat irradiation in this month. The cultural estimate of per se fltration without double filter and one of unidentified species are discussed.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.53 no.9
• /
• pp.464-469
• /
• 2004

The leakage current of transmission insulators contaminated with salt, clay, and kaolin was examined in the Gochang's Long Periods Testing Center. The Insulators were artificially contaminated and estimated with the method of equivalent salt deposit density(ESDD). The artificially contaminated insulators were installed with the same condition as in the real transmission power line and applied with 154 (kV). The leakage current of the artificially contaminated insulators was measured with environment conditions, such as temperature and humidity by the a automatic leakage current detecting system. The leakage current of heavily contaminated insulator was abruptly increased above 72［%］ of humidity, even though the leakage current was similar between the contaminated and non-contaminated insulators below 72［%］ of humidity. Also, it was found that the humidity was much more important than the temperature in the leakage current of transmission insulators. The leakage current of contaminated insulator was decreased when it was plenty of rainfall, resulting from natural washing.

• Journal of the Korean Applied Science and Technology
• /
• v.27 no.2
• /
• pp.99-106
• /
• 2010

We have investigated the rheological behaviours of emulsions containing polymers. The polymers used in this study were polyacrylamide and carboxy vinyl polymer. The emulsion with polyacrylamide shows better prior preference than that with carboxy vinyl polymer on the skin texture. In the toxicity test, such as, LLNA cell toxicity, skin organ culture and human patch test, polyacrylamide was the appropriate materials for the cosmetics. The viscosity of polyacrylamide shows maximum value in neutral pH and good stability against temperature. The decreasing effect of viscosity against salt was not good enough but showed a better result than that of carboxy vinyl polymer. Two times the amount of polyacrylamide should be used for the formation of a similar viscosity of carboxy vinyl polymer. Yield value of polyacrylamide was low and the effect for the stabilizing emulsions was also low.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.11
• /
• pp.255-259
• /
• 1997

The essence of meridian collateral and acupoints is an overall physiologic unction with the level of multiple unctional states. However it is a pity that until present, so in this paper described about some experimental results of physical reactions of meridian and acupoints. In order to verify meridian pathway and channel theory of energy in body. It is suppose that substance of meridian is pathway channel of the meridian materials. In basic examination, It was analyzed spectrum of reflection waves after beat or continuos vibrate to meridian point and non-meridian point meridian line and non-meridian line. The characteristics of reflection waves similar to flow channel in hydrodynamic. So it be able to suggest that the meridian is pathway and channel in body.