• Journal of the Korean Society of Radiology
• /
• v.13 no.1
• /
• pp.65-71
• /
• 2019

With regard to current Neck CT, Bismuth shielding boards are often being used to reduce exposure to superficial organs such as the thyroid. However, beam hardening often occurs near superficial organs with Bismuth shielding boards and variations in CT Number, Noise, and Uniformity values occur severely. This study looked into the usefulness of shielding boards made from aluminum and silicone that can be easily obtained and have good machinability by comparing them to the existing Bismuth shielding board. An Aluminum 7.3mm and a Silicone 21.5mm were made with shielding ratios similar to that of the Bismuth(0.06 mmPb). TLD (TLD-100) was placed on the thyroid area of the Phantom (RS-108T) and 5 doses were measured for each. To compare image quality, CT Number and Noise variations in axial images of the thyroid area in Neck CT images were compared. Also, variations in CT Number, Noise, and Uniformity were measured in the AAPM phantom images and compared. In the results, when thyroid doses for each shielding board were compared, the Bismuth shielding board showed a 14% reduction, the Silicone 21.5mm showed a 15% reduction, and the Aluminum 7.3mm showed a 13% reduction compared to the Non-Shield. Statistically, there were no significant differences in comparison with the Bismuth shielding board. In CT Number variations of thyroid area images, variations were largest for the Bismuth shielding board. With Uniformity evaluations of the AAPM phantom, the Bismuth shielding board was found unsuitable and the Aluminum 7.3mm and Silicone 21.5mm satisfied the acceptance criteria. Research results show that the Aluminum 7.3mm and Silicone 21.5mm have a similar shielding ratio to the high-priced Bismuth shielding board that is currently being used clinically and in comparison tests of CT Number attenuation coefficient variations, Noise, and Uniformity which are phantom image evaluation items, they proved to be better than Bismuth shielding boards. If various shielding boards are made using aluminum and silicone, sized appropriately for superficial organs, it would be useful in decreasing patient doses.

• Journal of the Society of Disaster Information
• /
• v.18 no.1
• /
• pp.182-193
• /
• 2022

Purpose: By measuring and evaluating the risk of biodiesel through non-volatile residue (NVR) and flash point and explosion limit measurement at a specific temperature according to ASTM test standards, the risk of chemical fire causative substances is identified and a universal evaluation method By derivation and securing the risk-related data of the material, it can be used for the identification and analysis of the cause of the fire, and it can be applied to the risk assessment of other chemical substances Method: In order to measure the risk of biodiesel, it was measured using the non-volatile residue(NVR) measurement method, which measures how much flammable liquid is generated at a specific temperature. Heating was tested by applying KS M 5000: 2009 Test Method 4111. In addition, the flash point was measured using the method specified in ASTM E659-782005, and the energy supply method was measured using the constant temperature method. In addition, the explosion limit measurement was conducted in accordance with ASTM E 681-04 「Standard test method for concentration limits of flammability of chemicals(Vapors and gases)」 test standard. Result: As a result of checking the amount of combustible liquid by the non-volatile residue (NVR)measurement method, the non-volatile residue(NVR) of general diesel when left at 105±2℃ for 3 hours was about 30% (70% of volatile matter) and about 4% of biodiesel. In addition, similar results were obtained for the non-volatile residue(NVR)heating temperature of 150±2℃, 3 hours and 200±2℃ for 1 hour, and white smoke was generated at 200℃ or higher. In addition, similar values were obtained as a result of experimentally checking the explosion (combustion) limits of general diesel, general diesel containing 20% biodiesel, and 100% biodiesel. Therefore, it was confirmed that the flammability risk did not significantly affect the explosion risk. Conclusion: The results of this study suggested the risk judgment criteria for mixtures through experimental research on flammable mixtures for the purpose of securing the effectiveness, reliability, and reproducibility of the details of the criteria for determining dangerous substances in the existing Dangerous Materials Safety Management Act. It will be possible to provide reference data for the judgment criteria for flammable liquids that are regulated in the field. In addition, if the know-how for each test method is accumulated through this study, it is expected that it will be used as basic data in the research on risk assessment of dangerous substances and as a basis for research on the determination of dangerous substances.

• Journal of Bio-Environment Control
• /
• v.31 no.4
• /
• pp.497-503
• /
• 2022

This study was conducted to investigate the horticultural media + decomposed granite + reused rock wool in the following mixing ratio: Control = 100:0, M1 = 80:0:20, M2 = 60:30:10, M3 = 40:30:30, M4 = 30:40:30, M5 = 0:50:50 (reused rockwool : decomposed granite : horticultural media) and develop the physicochemical properties and the growth of 'Sulhyang' strawberry runner plant. In the physical aspect of the horticultural media, statistical differences were recognized that the bulk density and particle density were lower in the control and M1. But the bulk density and particle density were high in the M3, M4, and M5, because it had high mixing ratio between recycled rock wool and decomposed granite. EAW and WBC showed a similar tendency. The air porosity and total porosity were higher in control and M1 than M3, M4, M5. Exchangeable cation (K⁺, Ca²⁺, Na⁺, Mg²⁺) and base replacement capacity (CEC) were higher in control and M1, than M2, M3, M4, and M5. As a result of the cultivation of 'Sulhyang' runner plant, the plant length was long in M2, 32.1 cm and smaller than M5 to 28.4 cm. However, if the crown diameter, which is the growth indicator of the runner plant, all 6 treatments were formed 11.23 mm-12.03 mm, which is considered to be suitable for the growth of the runner plant. There wasn't a statistical difference between the weight and dry weight of the root. As a result, the growth difference of the seedlings by the horticulture media was similar. Therefore, considering the physical properties of the horticultural media, it was judged that the air porosity and total porosity would be improved when the recycled rock wool and the decomposed granite were properly mixed rather than the use of the horticultural media as a single medium, which would be advantageous for irrigation management.

• Journal of the Korean Applied Science and Technology
• /
• v.40 no.3
• /
• pp.534-546
• /
• 2023

In this study, we investigated the antioxidant and anti-winkle activity in human fibroblast cell (CCD-986sk) of Persimmon Leaves (PL) as a cosmetic ingredient. As a result of investigating antioxidant activity through electron-donating ability and ABTS⁺ radical scavenging assay, the PL showed concentration-dependent antioxidant activity similar to ascorbic acid, a control group, at a concentration of 1,000 ㎍/ml. As a result of investigating the anti-wrinkle effect through elastase inhibition and collagenase inhibition assay, the PL showed concentration-dependent antioxidant activity similar to epigallocatechin gallate, a control group, at a concentration of 1,000 ㎍/ml. As a result of measuring the synthesis rate of pro-collagen type I and the inhibition rate of MMP-1 in UVB-induced CCD-986sk cells, the control group EGCG showed a 90.2% pro-collagen synthesis rate at 20 ㎍/ml and PL showed an 88.5% synthesis rate at 30 ㎍/ml. In addition, the inhibition rate of MMP-1 of 33.0% and 40.8% were confirmed in EGCG 20 ㎍/ml and PL 30 ㎍/ml, respectively. As a result of measuring the protein expression of pro-collagen type I and MMP-1 in the PL through western blot, it was confirmed that the protein expression of pro-collagen type I increased, and MMP-1 decreased when the PL was treated together compared to the UVB alone group. According to the above experimental results, it is expected to be used as a natural product material for cosmetics by confirming that the PL prevent photoaging caused by UVB stimulation and have antioxidant and anti-wrinkle effects.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.2
• /
• pp.148-169
• /
• 2023

Hayeob pigment is known as one of the traditional dark green pigments, but the color, raw material, and manufacturing method have not been clearly identified. However, comparing the analysis results of the particle shape and constituent minerals of Hayeob pigments revealed through pigment analysis studies of colored cultural properties such as Dancheong, Gwaebul, and paintings, Hayeob pigments appear to be the same as Dongrok pigments produced by salt corrosion. Therefore, in order to restore Hayeob pigment, the manufacturing method of Dongrok pigment was studied based on the records of old literature. The Dongrok pigment manufacturing method confirmed in the old literature records is a natural corrosion method in which copper powder and a caustic are mixed and then left in a humid condition to corrode. Based on this, artificial corrosion using a corrosion tester was adopted to corrode the copper powder more efficiently, and an appropriate mixing ratio was selected by analyzing the state of corrosion products according to the mixing ratio of the caustic agent. In addition, the manufacturing method of Dongrok pigment was established by adding a salt removal process to remove residual caustic agents and a purification process to increase chroma during pigment coloring. The prepared Dongrok pigments have a bluish green or green color, show an elliptical particle shape and a form in which small particles are aggregated, and a porous surface is observed. The main constituent elements are copper(Cu) and chlorine(Cl), and the main constituent mineral is identified as atacamite [Cu₂Cl(OH)₃]. As a result of an accelerated weathering test to evaluate the stability of the prepared Dongrok pigments, it was found that the greenness partially decreased and the yellowness significantly increased as deterioration progressed. Before deterioration, the Dongrok pigments had lower yellowness compared to the Hayeob pigments of the old Dancheong, but after deterioration, yellowness increased significantly, and it was found to have a similar chromaticity range as Dancheong's Hayeob pigments. As a result, the prepared Dongrok pigments were confirmed to be similar to Dancheong's Hayeob pigments in terms of color as well as particle shape and constituent minerals.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.49 no.4
• /
• pp.313-321
• /
• 2023

Platycodon grandiflorus (P. grandiflorus) flower is a perennial plant belonging to the family Campanulaceae and has many excellent pharmacological effects, so it has been used as a medicinal ingredient since ancient times. In addition, anthocyanin is a purple or blue natural pigment contained in plant flowers and fruits, and is known as a powerful antioxidant. The purpose of this study was to confirm the dermatological functionality of P. grandiflorus flower extract and the value of the bluish anthocyanin contained in flowers as a cosmetic material as a natural pigment. Firstly, 50% ethanol and 80% ethanol were added to the P. grandiflorus flower and extracted under reflux for 4 h at 25, 60, and 80 ℃, and the pH of each treatment group was similar. Based on the anthocyanin content and chromaticity (E^*ab), 50% ethanol 60 ℃ extraction conditions showing the color development most similar to the natural color of the P. grandifloras flower were selected, and a sample was prepared by concentrating and lyophilizing. The analysis results showed that the total phenol, total flavonoid, and total anthocyanin contents were in the ranges of 23 ㎍/mL, 16 ㎍/mL, and 0.17 ㎍/mL, respectively. The P. grandiflorus flower extract suppressed the production of nitric oxide (NO) and interleukin-6 (IL-6) in lipopolysaccharide (LPS) induced RAW264.7 cells. Furthermore, the P. grandiflorus flower extract showed wound healing effects through the promotion of skin cell migration in TNF-α stimulated human keratinocytes. The stability of anthocyanin and extract color was studied during a storage period of 50 days at various temperatures (4 ℃, 25 ℃, and 45 ℃). Color values (L, a, and b) of the P. grandiflorus flower extract changed over 50 days, whereas the bluish-purple color of the extract was stabilized using 5% maltodextrin. These results suggest that P. grandiflorus flower extract may be useful as a natural cosmetic pigment.

• Korean Journal of Heritage: History & Science
• /
• v.57 no.1
• /
• pp.146-159
• /
• 2024

In this study, a study on the production technology of the Buddha statue and the production of raw material origin was conducted through scientific analysis on the Bronze seated Bodhisattva Statue of Goseongsa Temple, a treasure. As a result of microstructure analysis through a metal microscope, it was confirmed that the microstructure of the Bronze seated Bodhisattva Statue of Goseongsa Temple was a process-type dendritic structure, and the casting structure of bronze was well represented, so it was manufactured through casting. Subsequently, as a result of analyzing the alloy composition ratio through SEM-EDS, it was identified as a ternary alloy with 81.26 wt% of copper (Cu) and 16.42 wt% of tin (Sn) and 1.72 wt% of lead (Pb). The results of the analysis of lead isotope ratios using a thermal ionization mass spectrometer (TIMS) were substituted into the distribution of lead isotope ratios on the Korean Peninsula, it was shown in corresponding to Jeolla-do and Chungcheong-do regions and North and South Gyeongsang Province. This suggests that the raw materials used in their production were likely sourced from the mines around Goseong Temple in Gangjin. Despite the fact that the statue is a medium and large Buddha with a total height of 51 centimeters, 1.72 wt% of lead (Pb) was found as a result of alloy composition ratio analysis, which showed a similar composition to the lead content ratio of small bronze and gilt-bronze Buddha statues. Therefore, we compared and analyzed the results of the analysis of the composition ratio of the alloys of bronze and gilt bronze statues, which has been scientifically analyzed with a compositional age similar to that of the Bronze seated Bodhisattva Statue of Goseongsa Temple. Comparison results, Various factors, such as the size of the Buddha statue as well as its stylistic characteristics and the age of composition, may exist in determining the alloy composition ratio of the bronze and gilt bronze Buddha statues, and it was confirmed that the alloy composition ratio or casting technology was properly adjusted when the Buddha statue was created. In other words, it is judged that a more comprehensive system of Buddha statue production technology should be investigated by conducting archaeological and art history studies on stylistic characteristics and age of composition, as well as scientific analysis results such as observation of internal structure, microstructure observation, and analysis of alloy composition ratio using radiation transmission irradiation.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.4
• /
• pp.359-371
• /
• 2008

Purpose: The purpose of this study was to investigate the stress distribution in mandibular implant overdentures with telescopic crowns compared to bar attachment. Material and methods: Three-dimensional finite element models consisting of the mandibular bone, 4 implants, and primary bar-splinted superstructure or secondary splinted superstructure with telescopic crowns were created. Vertical and oblique loads were directed onto the occlusal areas of the superstructures to simulate the maximal intercuspal contacts and working contacts such as group function occlusion. Maximum stress and stress distribution were analysed in mandibular bone, implant abutments, and superstructures. Results: 1. In comparison of von Mises stress on mandibular bone, telescopic overdenture had a little lower stress values in vertical load and working side load except oblique load. In the mandible, the telescopic overdenture distributed more uniform stress than the bar overdenture. 2. In comparison of von Mises stress on implant abutments, telescopic overdenture had much lower stress values in all load conditions. In implant abutments, the telescopic overdenture distributed stress similar to the bar overdenture. Stress was concentrated on the distal surfaces of the posterior implant abutments in both mandibular overdentures. 3. In comparison of von Mises stress on superstructures, the telescopic overdenture had much more stress values in all load conditions. However, the telescopic overdenture distributed more uniform stress on superstructure than the bar overdenture. In the bar overdenture, stress was concentrated on each cental area of bar structures and connected area between implant abutments and bar structures. Conclusion: In the results of this study, the telescopic overdenture had lower stress values than the bar overdenture in mandibular bone and implant abutments, but more stress values in superstructures. However, if optimal material was selected in making superstructures, the telescopic overdenture was compared to the bar overdenture in stress distribution.

• Journal of Food Hygiene and Safety
• /
• v.28 no.1
• /
• pp.50-55
• /
• 2013

Since 1 June 2012, it is prohibited to sell oilfish as a food material but there are still many illegal cases of selling oilfish as if it is tuna or grilled Patagonian toothfish. So it is absolutely crucial to construct the system to distinguish the real food material from oilfish. There are two sorts of oil fish called Ruvettus pretiosus and Lepidocybirium flavobrunneum involved in Percifomes order and Gempylidae class. 16S DNA gene region in mitochondria was selected to design the specific primers. For design species-specific primer, the theoretical experiment were performed for the sequences of R. pretiosus, L. flavobrunneum, Thunnus thynnus, Thunnus albacores, Makaira mitsukurii and Xiphias gladius, registered at the Gene bank from the National Centre for Biotechnology Information, using BioEdit 7.0.9.0. program. Through the analysis of the result from experiments, it was possible to design the 4 kinds of primers to distinguish R. pretiosus and L. flavobrunneum. As a comparison group, 3 kinds of tuna and 4 kinds of billfishes were selected and experimental verification was performed. As a result, for R. pretiosus and L. flavobrunneum, R.P-16S-006-F/R.P-16S-008-R and L.F-16S-004-F/L.F-16S-006-R primers were selected eventually and PCR condition was established. In addition, 178bp and 238bp of PCR products were confirmed from the established condition and non-specific band was not amplified among similar species. Therefore, the species-specific primers developed in this study would be very useful and used in various ways such as internet shopping mall and illegal distributions with fast and scientific results.

• Journal of Korean Society of Archives and Records Management
• /
• v.1 no.2
• /
• pp.57-79
• /
• 2001

[Go-Choseon], the first volume of Samgukyusa, is composed of two parts, the part of myth and that of history. There are very similar divinities between Hwanwoong in the myth of Dangun and YanDi-ShenNong of China: the solar divinity essential for survival of mankind and agriculture, the agriculture divinity said to have taught fanning, the medicine divinity said to have taught the characteristics of herbs and how to prevent diseases, the cultural hero who delivered civilization, and son on. During the transition from the age of myth to the age of history, the roles of gods had changed from the creation of the world to civilization and rule. The roles of Hwanwoong and YanDi-ShenNong were civilization and it was related with their divinities. Hence, regardless of a little difference, the myth of Hwanwoong and that of YanDi-ShenNong were created at the same stage of spiritual and material civilizations of Korea and China. This paper looks at the essence of [Wiseo] and the age of Hwanwoong through historical records. In my opinion, [Wiseo] is not a chinese history' book. The record, "According to [Wiseo] there had been Dangun-Wanggum 2,000 years ago" indicates the time [Wiseo] was written. 'Wi' means Wlman-choseon. Going back about 2,000 years from Wiman-choseon, the historical dates of the establishment of [Go-Choseon] almost dovetails to the age of King 'lao. So, there is a possibility that [Wiseo] is a history book of Wiman-Choseon dynasty which was written to prove the legitimacy of the dynasty by showing it succeeded to the Dangilll-Choseon dynasty. The sentences, "governed the country for 1,500 years" and "conferred Gija the position of king of Choseon" are very important records showing the age of the establishment of Dangun-Choseon. Gija came to Choseon in B.C 1122 when Yin replaced Zhou in the Choinese Continent. From the fact that Dangun had governed Choseon, we could reason out that Go-Choseon was established in B.C. 2622 that is much eariler than the era of king Yao, and that corresponds 'With the era of HuangDi(B.C 2698-2358). Hence, the era of Hwanwoong, the father-god of Dangun, might be later than B.G 3000 which conforms to the era of YanDi-ShenNong(B.C 3218-2600). Therefore, this paper contends lhat Hwanwoong and YanDi-ShenNong played the role of civilization in the same era [Go-Choseon], the first volume of Samgukusa is philologically very valuable material for research on the origin of Korean nation and its ancient history.