• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.24 no.6
• /
• pp.1-13
• /
• 2021

This study was performed to investigate the ecosystem service patterns in relation to climate change acceleration utilizing big data analysis. This study aimed to use big data analysis as one of the network of views to identify convergent thinking in two fields: climate change and ecosystem service. The keywords were analysed to ascertain if there were any differences in the perceiving problems, policy direction, climate change implications, and regional differences. In addition, we examined the research keywords of each continent, the centre of ecosystem service research, and the topics to be referred to in domestic research. The results of the analysis are as follows: First, the keyword centrality of climate change is similar to the detailed indicators of The Intergovernmental Science-Policy Platform on Biodiversity and Ecosystem Services (IPBES) regulations, content, and non-material ecosystem services. Second, the cross-analysis of terms in two journals showed a difference in value-oriented point; the Ecosystem Service Journal identified green infrastructure as having economic value, whereas the Climate Change Journal perceives water, forest, carbon, and biodiversity as management topics. The Climate Change Journal, but not the former, focuses on future predictions. Third, the analysis of the research topics according to continents showed that water and soil are closely related to the economy, and thus, play an important role in policy formulation. This disparity is due to differences in each continent's environmental characteristics, as well as economic and policy issues. This fact can be used to refer to the direction of research on ecosystem services in Korea. Consistent with the recent trend of expanding research regarding the impacts of climate change, it is necessary to study strategies to scientifically predict and respond to the negative effects of climate change.

• Applied Chemistry for Engineering
• /
• v.33 no.3
• /
• pp.296-301
• /
• 2022

Due to the fact that zirconium based metal-organic frameworks (Zr-MOFs), such as UiO-66, have a large specific surface area and excellent selective adsorption capacity, Zr-MOFs are gaining attention as materials that can provide protection from the attack of chemical warfare agents in battleground. However, most of the metal-organic frameworks have an issue of selective adsorption capacity degraded by water molecules when exposed to the atmosphere, because of the weak metal-organic ligand bonds and the presence of voids. Therefore, polydimethylsiloxane (PDMS), a representative hydrophobic polymer material, was coated on the surface of UiO-66 to enhance the sustainability of the diisopropyl methylphosphonate (DIMP) sorption capacity in the battleground condition. Through the analysis of surface structure and organic functional group distribution of PDMS coated UiO-66, silicon was confirmed to be evenly coated. The contact angle increased by over 30° for the PDMS coated UiO-66, indicating that the hydrophobicity was improved. In addition, both the UiO-66 and PDMS coated UiO-66 were used as adsorbents for DIMP, a similar chemical warfare agent, to investigate the durability of adsorption capacity in a high humidity environment. The PDMS coated UiO-66 showed higher durability of adsorption capacity for 20 days than that of pristine UiO-66.

• Journal of the Korean Applied Science and Technology
• /
• v.39 no.1
• /
• pp.108-114
• /
• 2022

In this study, the antioxidant effect of black sea ginseng containing a large amount of eicosapentaenoic acid, a natural physiologically active substance, was investigated, and its superiority as a functional cosmetic raw material was presented. The ability of the sea cucumber extract to remove active oxygen was evaluated for the inhibitory effect on intracellular nitric oxide (NO) production. The physiologically active substances of sea cucumber have an antioxidant effect that removes free radicals, and as a result of evaluation, it was confirmed that excellent NO production was suppressed. Studies have shown that bioactive substances are involved in antioxidant effects, immune and inflammatory response regulation by showing high antioxidant efficacy even at low concentrations. It is thought that the antioxidant removal ability of sea cucumber greatly contributes to the antioxidant efficacy of phenolic components containing EPA (eicosapentaenoic acid) of the sea cucumber extract. It was found to be similar to the report that the antioxidant component of sea cucumber works. In addition, it is excellent for wound healing with the eicosapentaenoic acid (EPA) component contained in a large amount of sea cucumber extract, which has been proven to be involved in the inhibitory effect of inflammatory activity. As a result of this study, it was confirmed that the effect of the phenol component contained in the sea cucumber extract had a close causal relationship with the antioxidant activity.

• Journal of Naturopathy
• /
• v.10 no.1
• /
• pp.42-47
• /
• 2021

Purpose: This study investigated the antioxidant activities of water extracts from Hibiscus petals, Moringa oleifera gymnosperm, and Nipa fruticans wurmb. Also, the possibility of their use as a functional cosmetic material and food were searched. Methods: We extracted Hibiscus petals, M. oleifera gymnosperm, and N. fruticans wurmb with water. And then, we measured the content of total polyphenols and flavonoids and the ability to scavenging free groups of ABTS and DPPH to study the antioxidant function. The toxicity of samples evaluated by measuring cell viability. Results: The polyphenol content of the water extract of N. fruticans wurmb was 109 ㎍/mg, which was significantly higher than that of Hibiscus petals (13 ㎍/mg) and M. oleifera gymnosperm (19 ㎍/mg). Radical scavenging ability was also excellent in N. fruticans wurmb, and the cytotoxicity test results of the samples were similar. Conclusions: The water extracts showed antioxidant activity to use for cosmetic materials or natural healing foodstuff.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.5
• /
• pp.173-181
• /
• 2021

Reinforced concrete structures are exposed to various environments, resulting in reinforcement corrosion due to moisture and ions penetration. Reinforced concrete corrosion causes a decrease in the durability performance of reinforced concrete structures. One solution to mitigate such issues is using FRP rebars, which offer several advantages such as high tensile strength, corrosion resistance, and light-weight than conventional rebars, in reinforced concrete instead of conventional steel rebars. The FRP rebar used should be examined at the limit state because FRP reinforced concrete has linear behavior until its fracture and can generate excessive deflection due to the low elastic modulus. It should be considered while designing FRP reinforced concrete for flexure. In the ultimate limit state, the flexural strength of FRP reinforced concrete as per ACI 440.1R is significantly lower than the flexural strength by applying both the environmental reduction and strength reduction factors accounting for the material uncertainty of FRP rebar. Therefore, in this study, the experimental results were compared with the deflection of the proposed effective moment of inertia referring to the local and international standards. The experimental results of GFRP and BFRP reinforced concrete were compared with the flexural strength as determined by ACI 440.1R and Fib bulletin 40. The flexural strength obtained by the experimental results was more similar to that obtained by Fib bulletin 40 than ACI 440.1R. The flexural strength of ACI 440.1R was conservatively evaluated in the tension-controlled section.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.6
• /
• pp.193-198
• /
• 2021

In this study, the rheological characteristics and of 3D printing composite materials and the compressive strength characteristics according to the lamination patterns were evaluated. As a result of rheology test, rapid material change was observed after 60 minutes of extrusion, yielding stress 1.4 times higher than immediately after mixing, and plastic viscosity was 14.94-25.62% lower. The compressive strength of the specimens manufactured in the mold and the laminated specimens were compared, and the lamination pattern of the laminated specimens were 0°, 45°, and 90° as variables. The compressive strength of the mold casting specimen and the laminated specimen from 1 to 28 days of age showed similar performance regardless of the lamination pattern. In particular, at the age of 28 days, the modulus of elasticity, maximum compressive strength, and strain at maximum stress of all specimens were almost the same. In order to analyze the interface of the laminated specimens, X-ray CT analysis of the specimen whose compressive strength were measured was performed. Through CT analysis, it was confirmed that cracks did not occur at the lamination interface, which can be judged that the interface in the laminated specimen behaved in an integrated manner.

• Journal of Conservation Science
• /
• v.37 no.6
• /
• pp.748-766
• /
• 2021

The Iksan Ssangneung (twin tombs), a pair of tombs comprising the Daewangneung (large royal tomb) and the Sowangneung (small royal tomb), were constructed in the typical style of stone tunnel and chamber tombs in the Baekje Kingdom during the Sabi period (538 to 660 AD) of ancient Korea. Soil layers exposed during excavation of Sowangneung in a trench east of the tomb are: the bottommost layer, the ground level layer, the Panchuk (rammed earth) layer of the Baekje, the layer created by a grave robbery, and soil recovered during the Japanese colonial period. Soil samples were obtained by segmenting an easy stratigraphic horizon into sub categorized soil layers, and their material properties were analyzed; they are composed mainly of sandy loam based on the particle size distributions. In the site foundation, loamy sand is packed in the bottommost layer, and sandy loam with high sand and silty sand fills most of the overlying layer. The central and topmost portion of the Baekje layer is composed of loam with high clay content. All soil layers show geochemical behaviors similar to those of the bottommost layer. X-ray diffraction analysis verified kaolinite in all layers, also observed in soil layers displaying high crystallinity. Kaolinite and halloysite were identified by scanning electron microscopy. Thus, we conclude that the Baekje layer of the Sowangneung is composed of sandy loam containing kaolin procured from near the site. An impermeable middle to upper layer was created using viscous loam. The top of the tomb was closed tightly.

• Tunnel and Underground Space
• /
• v.32 no.6
• /
• pp.363-372
• /
• 2022

Precast concrete is an effective method to increase the construction quality and construction speed by optimizing and making the manufacturing conditions similar. In order to more effectively produce a fireproof material-integrated precast duct slab, the purpose of this study was to determine whether the fire resistance performance of the fireproof layer is maintained when a method of increasing the curing rate using a hardening accelerator is used. As a result of performing a fire resistance performance test on specimens classified according to whether or not the hardening accelerator was included, increase of temperature inside the specimen was high in the specimens using the hardening accelerator, and the section loss of the fireproof layer occurred locally on the surface exposed to fire heating. In conclusion, it is judged that the fireproof layer in the case where the strength at 3th day of age is gained within 1 day curing age using a hardening accelerator does not guarantee sufficient fire resistance performance in the conditions used in this study.

• Journal of the Korean Society of Radiology
• /
• v.17 no.1
• /
• pp.25-30
• /
• 2023

As 3D printing technology is used in the medical field, interest in metal materials is increasing. The Department of Radiation Oncology uses a shielding block to shield the patient's normal tissue from unnecessary exposure during electron beam therapy. However, problems such as handling of heavy metal materials such as lead and cadmium, reproducibility according to skill level and uncertainty of arrangement have been reported. In this study, candidate materials that can be used for metal 3D printing are selected, and the physical properties and radiation dose of each material are analyzed to develop a customized shielding block that can be used in electron beam therapy. As candidate materials, aluminum alloy (d = 2.68 g/cm³), titanium alloy (d = 4.42 g/cm³), and cobalt chromium alloy (d = 8.3 g/cm³) were selected. The thickness of the 95% shielding rate point was derived using the Monte Carlo Simulation with the irradiation surface and 6, 9, 12, and 16 energies. As a result of the simulation, among the metal 3D printing materials, cobalt chromium alloy (d = 8.3 g/cm³) was similar to the existing shielding block (d = 9.4 g/cm³) in shielding thickness for each energy. In a follow-on study, it is necessary to evaluate the usefulness in clinical practice using customized shielding blocks made by metal 3D printing and to verify experiments through various radiation treatment plan conditions.

• Journal of Mushroom
• /
• v.20 no.4
• /
• pp.274-278
• /
• 2022

The present study aimed at selecting a cost-effective substrate for king oyster mushroom based on the growth characteristics of fruiting body for use as a basic resource to ensure stable production on farms. Compositional analysis of substrates manufactured with different materials in each process revealed that the total carbon content was 42.24-48.22% higher and the total nitrogen content was 1.7-2.29% higher in the processed lot than in the control (i.e., substrate used by the farmhouse; 40.86% and 1.39%, respectively). Meanwhile, the carbon-to-nitrogen ratio was the highest in the control (27.9% vs. 19.12-27.88% in the processed lot). When cultured for 28 days, the mycelium growth was 11.5 and 11.3 mm in substrates 1 and 6, respectively, indicating the fastest growth; meanwhile, the values were 10.1-10.3 mm in the control and substrate 11, showing a similar tendency. Mycelial density did not differ significantly among the processed lots. Yield per bottle was higher in substrates 8 (205.95 g/bottle), 7 (178.51 g/bottle), and 11 (170.63 g/bottle) than in the control (152.2 g/bottle). Fruiting body quality was comparable to controls in all processed lots. Overall, economic effects, such as substrate material prices, should be analyzed, and stability evaluations, such as residual pesticide and harmful microorganisms, should be undertaken along with further detailed examination to ensure safe and stable production on farms.