• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.3
• /
• pp.74-90
• /
• 2010

The objectives of this paper are to introduce the GIS based resource circulation information, and to identify additional(or potential) industrial symbiosis based on existing industrial symbiosis and linkage-pair of industry by material. The resource circulation information contains information of the reuse of materials, water, and energy for all manufacturing companies in Ulsan Metropolitan City. The information can further be classified into the three steps -- input information(raw materials), flow information (products), and output information (by-products). The survey data from 3,768 industries and institutions in Ulsan Metropolitan area were collected and built into the GIS to analyze the mechanism of the industrial symbiosis. The results of this study strongly suggest that there are some additional industrial symbioses using by-products(materials, steam, waste water) and further efforts should be given to make them more effective. We expect that the methodology of building the resource circulation information of this study can be helpful to other local governments that try to build similar system.

• Journal of Microbiology and Biotechnology
• /
• v.26 no.12
• /
• pp.2171-2178
• /
• 2016

Polyester cloth (PC) was selected as a prospective inexpensive substitute separator material for microbial fuel cells (MFCs). PC was compared with a traditional Nafion proton exchange membrane (PEM) as an MFC separator by analyzing its physical and electrochemical properties. A single layer of PC showed higher mass transfer (e.g., for $O_2/H^+/ions$) than the Nafion PEM; in the case of oxygen mass transfer coefficient ($k_o$), a rate of $50.0{\times}10^{-5} cm{\cdot}s^{-1}$ was observed compared with a rate of $20.8{\times}10^{-5}cm/s$ in the Nafion PEM. Increased numbers of PC layers were found to reduce the oxygen mass transfer coefficient. In addition, the diffusion coefficient of oxygen ($D_O$) for PC ($2.0-3.3{\times}10^{-6}cm^2/s$) was lower than that of the Nafion PEM ($3.8{\times}10^{-6}cm^2/s$). The PC was found to have a low ohmic resistance ($0.29-0.38{\Omega}$) in the MFC, which was similar to that of Nafion PEM ($0.31{\Omega}$); this resulted in comparable maximum power density and maximum current density in MFCs with PC and those with Nafion PEMs. Moreover, a higher average current generation was observed in MFCs with PC ($104.3{\pm}15.3A/m^3$) compared with MFCs with Nafion PEM ($100.4{\pm}17.7A/m^3$), as well as showing insignificant degradation of the PC surface, during 177 days of use in swine wastewater. These results suggest that PC separators could serve as a low-cost alternative to Nafion PEMs for construction of cost-effective MFCs.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.11
• /
• pp.764-770
• /
• 2014

This study assessed analysis of N-nitrosamines by separation, identification, and quantification using a gas chromatography (GC) mass spectrometer (MS) with electron impact (EI) mode. Samples were pretreated by a automated solid phase extraction (SPE) and a nitrogen concentration technique to detect low concentration ranges. The analysis results by EI-GC/MS (SIM) and EI-GC/MS/MS (MRM) on standard samples with no pretreatment exhibited similar results. On the other hand, the analysis of pretreated samples at low concentrations (i.e. ng/L levels) were not reliable with a EI-GC/MS due to the interferences from impurity peaks. The method detection limits of eight (8) N-nitrosamines by EI-GC/MS/MS analysis ranged from 0.76 to 2.09 ng/L, and the limits of quantification ranged from 2.41 to 6.65 ng/L. The precision and accuracy of the method were evaluated using spiked samples at concentrations of 10, 20 and 100 ng/L. The precision were 1.2~13.6%, and the accuracy were 80.4~121.8%. The $R^2$ of the calibration curves were greater than 0.999. The recovery rates for various environmental samples were evaluated with a surrogate material (NDPA-$d_{14}$) and ranged 86.2~122.3%. Thus, this method can be used to determine low (ng/L) levels of N-nitrosamines in water samples.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.8 no.1
• /
• pp.97-102
• /
• 2000

This study was carried out to investigate the effects of operating temperatures on decomposition and physicho-chemical properties of household food wastes in a fermentation dryer, which was manufactured by Samwoo Co. Ltd. The household food wastes of 100 kg can be put and dried in this dryer at once. The experiments were performed at each temperature of $35^{\circ}C$, $45^{\circ}C$, $55^{\circ}C$ and $70^{\circ}C$ for two days respectively. The samples taken at the fixed time were dried at $105^{\circ}C$ and analyzed to find the decomposition rate and the concentration of each substance. The results obtained were as follows: The decomposition rate at 35 and $70^{\circ}C$ was the highest and showed the similar tendency during the experimental period. The higher the operating temperature was, the faster the water content of the composting material reduced. pH value increased at the operating temperature of 55 and $70^{\circ}C$ and was higher than at the other operating temperatures. Nitrogen content did not show any tendency during the experimental period. $P_2O_5$ and CaO content increased during the experimental period but MgO, $K_2O$ and NaCl were not accumulated. Cu content based on dry matter was in the range of ND~100.4 mg/kg and Cd, Pb and Cr were not detected.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.25 no.2
• /
• pp.69-76
• /
• 2017

In the Korea, 80 percent of livestock manure were converted into compost and used as organic fertilizers. The livestock manure compost has two types of powder and pellet type (ID= 5~10 mm). The aim of this study was to investigate the properties of two types of cow manure compost pellet (cylinder and sphere type). Nitrogen concentrations of cylinder type and sphere type of compost pellets were 1.23 and 1.24%, respectively. There were similar with nitrogen concentration of cylinder and sphere types of compost pellets. As a result of analyzing the effect of granulation processing, it was found that the moisture content of the raw material was the most influential factor in the granulation processing in both of the processing types of the screw pressing method and the rotating cylinder method. When the cylinder and sphere types of compost pellets were dry to 20% of moisture content, the specific gravities of these compost pellets were 1.38 and 1.13, respectively. The compressive strength of cylinder type pellet and sphere type pellet were 27.6 and $11.3kg/cm^2$, respectively.

• Cartoon and Animation Studies
• /
• s.49
• /
• pp.425-464
• /
• 2017

The Knowledge of the Channel (e) is often used as educational materials; it delivers very short but compelling message of strong or interesting timeliness. However, as the media environment changes, expectations and demands for The Knowledge The Knowledge of the Channel (e) is used in school education and what should be improved upon to increase utilization of educational resources. We surveyed 361 elementary, middle and high school teachers and analyzed the frequency of using, approach and learning activities of The Knowledge of the Channel (e) in school education. We also analyzed difficulties in using it in the school and what improvements should be made. Result show that the frequency of using The Knowledge of the Channel (e) in school is highest in elementary schools, followed by middle school, and then high school. Teachers strongly consider curricular relevance when selecting broadcasting contents for education, and among programs of EBS(Educational Broadcasting System), most frequently use The Knowledge of the Channel (e). The The Knowledge of the Channel (e) is mainly used as an incentive for increasing motivation. When examined by elementary school curriculum, this material is highly utilized in subjects with content such as society, morality, and science, or with approaches that require various perspectives. However, it is difficult for teachers to find materials directly related to their classes, and since other media content similar to The Knowledge of the Channel (e) is abundant, the utilization of The Knowledge of the Channel (e) is decreasing. To improve this, The Knowledge of the Channel (e) needs to improve its platform and transformed the type of The Knowledge of the Channel (e) content being provided on social media.

• Applied Microscopy
• /
• v.40 no.3
• /
• pp.155-162
• /
• 2010

Bone is a hierarchically structured composite material which has been well studied by the materials engineering community because of its unique structure and mechanical properties. Bone is a laminated organic-inorganic composite composed of primarily hydroxyapatite, collagen and water. The main mineral that gives bone's hardness is calcium phosphate, which is also known as hydroxyapatite. Light microscopy (LM) and transmission electron microscopy (TEM) were used to study the structure of femurs from chicken and rabbit. The elemental analysis was used to search variation in the distribution of calcium, potassium and oxygen in the femur. Current investigation focused on two structural scales: micro scale (arrangement of compact bone) and nano scale (collagen fibril and apatite crystals). At micro scale, distinct difference was found in microstructures of chicken femur and rabbit femur. At nano scale, we analyzed the shape and size of apatite crystals and the arrangement of collagen fibril. Consequently, femurs of chicken and rabbit had very similar chemical property and structures at nano scale despite of their different species.

• Journal of radiological science and technology
• /
• v.37 no.2
• /
• pp.143-150
• /
• 2014

This study was designated to investigate the bremsstrahlung and radiation dose by beta rays. Radiation attenuation from I-131 treatment ward was analyzed using radio protective apron. Shielding materials which is included lead or water were simulated in Monte Carlo Simulation then the spectrum on interaction was analyzed. The shielding materials were categorized according to the thickness. 0.25mm and 0.5mm thick lead and 0.1mm and 0.2mm thick water shielding materials were configured in Monte Carlo Simulation for this study. Only lead shielding method and water plus lead shielding method were carried. As a results, when 0.5mm thick lead shielding method was performed, the radiation dose was similar to the results with water plus lead shielding method. In case of using 0.25mm thick lead shielding, the shielding effect was somewhat less. However, that shielding method cause dose reduction of about 60% compare with non-shielding material.

• Journal of Chest Surgery
• /
• v.33 no.9
• /
• pp.723-728
• /
• 2000

Background: Minimally invasive techniques for open heart surgery are widely accepted in these days. There are minimally invasive approaches by the right or left parasternal incision and another approaches by mini-sternotomy of upper or lower half or sternum. We report the safety and efficacy of minimally invasive technique with right parasternal incision compared with the routine full sternotomy. Material and Method: From April 1997 through February 1999, 20 patients(Group A) underwent minimally invasive cardiac operations. We chose 41 patients(Group B) whose preoperative diagnosis were the same and general conditions were similar and who underwent routine full sternotomy before April 1997. We compared A group and B group in many aspects. We performed routine full median sternotomy in B group but we did a minimally invasive technique through a small right parasternal incision in A group. Result: mean age was 36.1 years in both groups. In disease entities, there were 11 cases of ASD, 9 cases of mitral valve disease in group A, and 16 cases of ASD, 25 cases of mitral valve diseases in group B. In ASD, operation time, cardiopulmonary bypass time of aortic occulusion time were 263 min, 82 min, and 41 min in group A and 180 min, 53 min, and 32 min in group B. In mitral valve disease, operation time, cardiopulmonary bypass time and aortic occlusion time were 267min, 106 min, and 70min in A group and were 207 min, 82 min, and 69 min in group B. There were significant differences in operation time, CPB time, and ACC time between group A and group B. There was a significant difference in the amount of bleeding in postoperative day 1 between group A and group B of mitral diasease. However, there was no significant difference in the amount of bleeding in other comparisons. Mean length of incision was 8.7 cm in group A. There was no significant difference in postoperative complications between A group and B group. There was no mortality in either group. Conclusion: We conclude that this minimally invasive technique with right parasternal incision is cosmetically excellent but it is not effective in reducing operative time and there was no significant difference in recovery time and postoperative complications compared with routine full sternotomy.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1998.02a
• /
• pp.120-120
• /
• 1998

Boron nitride (BN) films have attracted a growing interest for a variety of t technological applications due to their excellent characteristics, namely hardness, c chemical inertness, and dielectrical behavior, etc. There are two crystalline phases 1551; of BN that are analogous to phases of carbon. Hexagonal boron nitride (h-BN) has a a layered s$\sigma$ucture which is spz-bonded structure similar to that of graphite, and is t the stable ordered phase at ambient conditions. Cubic boron nitride (c-BN) has a z zinc blende structure with sp3-bonding like as diamond, 따ld is the metastable phase a at ambient conditions. Among of their prototypes, especially 삼Ie c-BN is an i interesting material because it has almost the same hardness and thermal c conductivity as di없nond. C Conventionally, significant progress has been made in the experimental t techniques for synthesizing BN films using various of the physical vapor deposition 밍ld chemical vapor deposition. But, the major disadvantage of c-BN films is that t they are much more difficult to synthesize than h-BN films due to its narrow s stability phase region, high compression stress, and problem of nitrogen source c control. Recent studies of the metalorganic chemical vapor deposition (MOCVD) of I III - V compound have established that a molecular level understanding of the d deposition process is mandatory in controlling the selectivity parameters. This led t to the concept of using a single source organometallic precursor, having the c constituent elements in stoichiometric ratio, for MOCVD growth of 삼Ie required b binary compound. I In this study, therefore, we have been carried out the growth of h-BN thin f films on silicon substrates using a single source precursors. Polycrystalline h-BN t thin films were deposited on silicon in the temperature range of $\alpha$)() - 900 $^{\circ}$C from t the organometallic precursors of Boron-Triethylamine complex, (CZHs)3N:BRJ, and T Tris(dimethylamino)Borane, [CH3}zNhB, by supersonic molecular jet and remote p plasma assisted MOCVD. Hydrogen was used as carrier gas, and additional nitrogen w was supplied by either aDlIDonia through a nozzle, or nitrogen via a remote plasma. T The as-grown films were characterized by Fourier transform infrared spectroscopy, x x-ray pthotoelectron spectroscopy, Auger electron spectroscopy, x-ray diffraction, t transmission electron diffraction, optical transmission, and atomic force microscopy.roscopy.