• Journal of Biomedical Engineering Research
• /
• v.24 no.1
• /
• pp.37-44
• /
• 2003

This experimental study is aimed at evaluating the hydrodynamic performance of newly designed self-expandable graft stents under steady flow condition. Two graft stents with different coating materials and a bare TiNi metallic stent for comparison test were used in the experiment. Pressure variation and velocity distribution at the upstream and downstream of the stents were measured at flow rates of 5, 10, and 15 l/min, respectively. Pressure loss due to insertion of the stent increased with increasing flow rate exponentially as expected. At a flow rate of 15 l/min, pressure loss of Polyure-thane(PU)-coated graft stent was 6 times higher than that of TiNi metallic stent, while the pressure loss of a porous Polytetrafluoroethylene(PTFE)-coated graft stent was comparable to a bare TiNi metallic stent. Velocity profiles of the porous PTFE-coated graft stent were similar to those of a bare TiNi metallic stent regardless of flow rate. Furthermore, the velocity profile of PU-coated graft stent revealed an asymmetrical and relatively low central velocity at a higher flow rate than 10 1/min, expecially, where the effects resulted in increases of wall shear stress and normal stress. The worse hydrodynamic behavior of PU-coated graft stent than the other two stents might be attributed to formation of folds due to poor flexibility of coated material when inserting the graft stent into the pipe with a more smaller size, which later gave rise non-symmetry of flow area, increase of surface roughness and jet flow via the crevice between the stent and cylinder wall.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.8
• /
• pp.32-36
• /
• 2018

A tensile test evaluation of a polypropylene plate was carried out using an Instron tester with a capacity of 500 kgf. To evaluate the strain rate sensitivity of the polypropylene plate with a thickness of 0.8 mm, a tensile test was performed at room temperature through strain rate variations from $5{\times}10^{-4}/sec$ to $5{\times}10^{-2}/sec$. From these, the changes in strength due to the strain rate change and temperature change were compared. As a result of the experiment, the strength increased with increasing initial strain rate. Polypropylene was found to be a material with a positive strain rate sensitivity. In addition, the high temperature tensile properties of the polypropylene plate were evaluated using high temperature tensile tests at 80, 120, and $160^{\circ}C$. The strength decreased with increasing temperature. In particular at $160^{\circ}C$, the tensile strength decreased to zero. The increase in yield strength and the tensile strength at room temperature, $80^{\circ}C$ and $120^{\circ}C$ were similar. At $160^{\circ}C$, however, there was almost no increase in strength because the stress approached zero. In the high temperature tensile test, the tensile strength increased more than the increase in yield strength with increasing strain rate.

• Journal of Korean Ophthalmic Optics Society
• /
• v.15 no.1
• /
• pp.55-60
• /
• 2010

Purpose: We investigated the changes of plastic lens after etching of coating films by comparing uncoated lens. Methods: CR-39, middle index and high index lenses of 0 (zero) diopter were etched at $80^{\circ}C$ and room temperature using a coating remover, and then changes of refractive power, transmittance and surface morphology were investigated. Results: There were no differences in refractive power and transmittance between uncoated and etched lenses. The etching rate was similar in both CR-39 and middle index lens, but in the case of high index lens, it was slower and less steady than the others. From the SEM observation of lens surface, etching damage was found out on the surface of etched lens. It was shown the least damage in middle index lens but the most damage in high index lens. Conclusions: If the etching of coating films is demanded on condition that the surface of ophthalmic lenses are not damaged, a using of most adequate coating remover based on lens material should be considered, and a caution for proper etching conditions is required.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.24 no.4
• /
• pp.69-76
• /
• 2016

To produce the primary data for best management of soil nutrient in organically practiced soils, 75 leading organic farms whose paddy fields were certified as organic were selected. Soil samples were collected from the paddy fields before plowing, and then analyzed for the determination of physico-chemical properties. Soil pH, organic matter and available phosphate were analyzed and averaged 6.2, $25.6mg\;kg^{-1}$ and $88.4mg\;kg^{-1}$, respectively. Contrary to the national-scale-surveyed paddy soils including organic and conventional farming, pH was higher, available phosphate was lower in the organically practiced soils, but organic matter was similar. With the increasing cultivation period in organic, soil pH and porosity were also increased, EC, available phosphate, bulk density and soil hardness were lower than those from the national survey. Organic matter, however, was not significantly changed. The bulk density was negatively correlated with the organic matter content for both surface topsoil ($R^2=-0.5424$) and subsoil ($R^2=-0.6429$) (p<0.05). Soil quality is improved in most of soil chemical and physical composition factors excluding organic matter and available phosphate. However, it is necessary to establish the counter measure plan for organic matter management and to develop phosphate-containing materials which can be used as organic agricultural material in the future.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.9
• /
• pp.925-932
• /
• 2008

Adsorption performance of tetracycline antibiotic compounds such as tetracycline(TC), oxytetracycline(OTC), chlortetracycline (CTC) and minocycline(MNC) on granular activated carbon(GAC) was evaluated in this study. The coal-based activated carbon was found to be more effective than other carbons in adsorption of tetracycline antibiotic compounds. The wood-based activated carbon was less effective than coconut- and coal-based carbon in adsorption nevertheless having larger pore volume and specific surface area than others carbons. The maximum adsorption capacities(X/M) of coal-based activated carbon for the four tetracycline species was 1.27$\sim$1.36 and 1.69$\sim$1.84 times larger than coconut- and wood-based activated carbon, respectively. Carbon usage rates(CUR) of coal-, coconut- and wood-based activated carbons for tetracycline(TC) were 2.96 g/day, 3.40 g/day and 4.53 g/day, respectively. Similar results were obtained in the adsorption of the rest three tetracycline species. It is concluded that coal-based activated carbon could removed the tetracycline antibiotic compounds better than other material-based activated carbons.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.11 no.1
• /
• pp.42-45
• /
• 2008

It has been reported that FRP (fiber reinforced plastic) can be recycled by separating into layers instead of crushing into powder. F-fiber obtained from roving layer separated from FRP, has bigger tensile strength than the bundle of glass fibers of which FRP was made (more than 90%). SEM image of F-fiber shows the presence of some resin. Under the proposition of usage of F-fiber in the concrete material, tensile strength is examined after soaking in a basic solution (NaOH+KOH). The reaction mechanism of strength loss may be considered as an attack of hydroxide ion ($OH^-$) on a chemical bond of Si-O-Si of glass fiber. The simulation graph of the strength loss data implies certain reaction mechanism. While in the early stage kinetically controlled reaction results in a fast drop of tensile strength, after 30 days dispersion rate of hydroxide ion plays a major role in strength loss. This result is similar to the one for the AR glass. An extrapolation of the graph would make an assumption about the lift time of F-fiber possible.

• Journal of Conservation Science
• /
• v.28 no.3
• /
• pp.205-216
• /
• 2012

65 samples of glass bead excavated from Mahan tombs of Asan Bakjimeure site consists of 13 of potash glass group and 52 of soda glass group and soda glass is superior in numbers. When classified according to color, purple blue glass bead is accompanied potash and soda glass group whereas purple glass bead is potash glass group and red, greenish blue, green and gold foil glass bead is soda glass group. Purple blue glass bead is classified as LCA type in which the content of the stabilizer is low. Of this, the soda glass categorized as LMK type with low content of MgO and $K_2O$ is determined that natron is used as the raw material. As to red glass, the homogeneous glass is LCA-B/HMK type and the heterogeneous glass is HCLA/LMK type. Thus, each of these two types are likely to be used plant ash and natron respectively. Greenish blue and green glass depends of the type that round glass is LCA-A/LMHK type and the segmented glass is LCA-B/HMK type. The gold foil glass bead is manufactured by the purity of 19.9~22.6K gold foil and the soda glass of HCLA/LMK type. In other words, the most of the glass bead of Asan Bakjimeure site is similar to the composition of the glass confirmed in other sites of the Baekche period. On the other hand, the greenish blue and green segmented bead and some red round bead is a different chemical composition is considered that the difference in raw materials. These characteristics is expected to be an important evidence for the understanding of the trade system of the ancient glass.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.42 no.5
• /
• pp.426-433
• /
• 2009

Fish scales have potential in functional food preparation due to their antioxidant and antihypertensive properties. We investigated the angiotensin I converting enzyme (ACE) inhibitory activity of Tilapia mossambica scale extracts. Hydrolysates of tilapia scales were prepared by enzymatic extraction using five proteases (${\alpha}$-chymotrypsin, Alcalase, Kojizyme, Protamex and trypsin) after scales were treated with hot water for 3 hr. Scale enzymatic hydrolysates prepared using both hot water and enzyme treatments exhibited elevated hydrolysis (about 25%-55%) compared to only enzyme treatment (about 15%-45%). Enzymatic hydrolysates (1 mg/mL) prepared by both hot water and enzyme treatments also showed significantly increased ACE inhibitory activities from about 20%-75%. The pattern of ACE inhibitory activities was similar to the degree of hydrolysis. Alcalase and ${\alpha}$-chymotrypsin hydrolysates displayed the highest ACE inhibitory activities ($IC_{50}$ = 0.83 mg/mL and 0.68 mg/mL, respectively). In addition, the ACE inhibitory effects of $IC_{50}$-chymotrypsin hydrolysates increased with decreasing molecular weight (5 kDa>, 10 kDa> and 30 kDa>), with the 5 kDa> fraction displaying the highest ACE inhibitory activity (about 89.9% and $IC_{50}$ = 0.1 mg/mL). We suggest that the peptide compounds of enzymatic hydrolysates prepared from tilapia scale enhances ACE inhibitory activity and might be useful as an antihypertensive material.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.640-649
• /
• 2018

This study analyzed the consumer awareness of cycling wear using web mining, one of the big data analysis methods. For this, the texts of postings and comments related to cycling wear from 2006 to 2017 at Naver cafe, 'people who commute by bicycle' were collected and analyzed using R packages. A total of 15,321 documents were used for data analysis. The keywords of cycling wear were extracted using a Korean morphological analyzer (KoNLP) and converted to TDM (Term Document Matrix) and co-occurrence matrix to calculate the frequency of the keywords. The most frequent keyword in cycling wear was 'tights', including the opinion that they feel embarrassed because they are too tight. When they purchase cycling wear, they appeared to consider 'price', 'size', and 'brand'. Recently 'low price' and 'cost effectiveness' have become more frequent since 2016 than before, which indicates that consumers tend to prefer practical products. Moreover, the findings showed that it is necessary to improve not only the design and wearability, but also the material functionality, such as sweat-absorbance and quick drying, and the function of pad. These showed similar results to previous studies using a questionnaire. Therefore, it is expected to be used as an objective indicator that can be reflected in product development by real-time analysis of the opinions and requirements of consumers using web mining.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.5
• /
• pp.47-53
• /
• 2020

The purpose of this study was to increase product reliability by improving the durability of the breech block for a 30mm Automatic Gun. The breech block is a key component of a gun that functions as chambering, closing, and extracting. The breech block requires high reliability, which needs to be improved because cracks of a breech block can occur early in operation. Cause analysis confirmed that the crack is caused by repeated impacts. Therefore, the following improvement measures were studied, and the effects were demonstrated using a firing test. The energy of impact absorption was increased by changing the material, and the stress concentration was mitigated by increasing the value of R. In addition, the fatigue life was increased by adding Shot-peening, deleting chromium plating, and changing the forging method. The firing test did not show firing trouble for up to 5,000 rounds. The start timing of the crack was delayed, and the depth was small. Therefore, the improved product was more durable than the existing product. This study can be used as a useful reference when assessing the improvement of the durability of similar products, life study, and criteria for crack acceptance.