• Journal of Mushroom
• /
• v.20 no.3
• /
• pp.163-167
• /
• 2022

Bio-based alternative leathers may be produced from biomass fiber, protein polymers, bacterial cellulose, and mushroom mycelia. Of these components, mushroom mycelia are of greatest interest. In this study, the potential of Fomes fomentariusas a mushroom mycelial mat was confirmed, and the optimal strain for the development of the mycelial mat was determined. Moreover, the quality of the mycelial mat was improved by identifying an efficient culture method to increase productivity. Mutant strains whose independence was verified were obtained by treatment with gamma irradiation under various conditions. Biofilm formation by the resulting strains was examined in sawdust and liquid media and the characteristics of the biofilms were analyzed. The biofilm of the mutant strains showed results that were similar to or better than the biofilms of longevity and cypress mushrooms. These findings are expected to be utilized in future research aimed at discovering new biomaterials using mushroom mycelia.

• Journal of Fashion Business
• /
• v.26 no.4
• /
• pp.100-111
• /
• 2022

After the corona pandemic, when consumers choose clothes, the issue of sustainability has become a more important selection criterion. The eco-friendly functional fiber used in the study is a smartcell, which has functions such as UV protection, decomposition of harmful substances, deodorization, antibacterial and biodegradation. This eco-friendly functional fiber was dyed using five kinds of natural dyes to examine the color change according to dyeability and dyeing conditions. As natural dyes, gardenia, turmeric, sappan wood, lac, and indigo were used. For comparison with smartcell, rayon, a cellulose regenerated fiber, and wool fiber, a protein fiber, were dyed under the same conditions to compare dyeability and color. The study results are as follows. It was found that smartcell had superior dyeability compared to rayon and wool in gardenia dye and showed lower dyeability than wool when dyeing turmeric, sappan wood, and lac dyes, but showed superior or similar dyeability than rayon. In case of indigo dyeing, the dyeability of smartcell was the best when dyed once, but it was found that smartcell had a lower effect on repeated dyeing compared to wool or rayon. Therefore, smartcell has superior dyeability compared to rayon fiber in gardenia, turmeric, sappan wood, and lac dyeing, and in case of indigo dyeing, it is suitable for light dyeing. When smartcell is produced as textile fashion products, natural dyeing is actively introduced and commercialized, and it is hoped that this study can be a reference material.

• Journal of People, Plants, and Environment
• /
• v.23 no.4
• /
• pp.455-464
• /
• 2020

Background and objective: This study was conducted to examine changes in the composition and physiological activity of Gardenia Fructus after being roasted. Methods: The antioxidant, anti-inflammatory and antibacterial activity of Gardenia Fructus was evaluated using the Gardenia Fructus (GF) and roasted Gardenia Fructus (RGF) ethanol extracts, and their components were analyzed through HPLC. Results: As a result, it was confirmed that the content of gardenoside and geniposide decreased and the content of genipin increased when GF was roasted. The total content of polyphenols was 54.5 ± 2.18 mg gallic acid equivalents (GAE) per gram of the GF extract and 69.6 ± 0.36 mg GAE per gram of the RGF extract. As a result of evaluating 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity, both the GF and RGF extracts showed the similar activity to ascorbic acid at the concentrations of 1 mg/mL or higher. In RAW 264.7 macrophages stimulated by lipopolysaccharides (LPS), the RGF extract showed a higher effect of reducing NO production, and significantly reduced the expression of an inflammatory cytokine, IL-6. As a result of evaluating the antimicrobial activity, the RGF extract showed higher antimicrobial activity against Escherichia coli and Bacillus subtilis. In the dextran sulfate sodium salt (DSS) induced inflammatory bowel disease mouse model, the RGF extract reduced the weight of the spleen, and both the GF and RGF extracts reduced the number of bacteria in the colon. Conclusion: Therefore, it has been confirmed through this study that roasting at a high temperature changes the main components of the GF extract and increases its biological activity. The RGF extract is expected to be used as a natural material with antioxidant, anti-inflammatory and antibacterial effects.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.8
• /
• pp.29-37
• /
• 2022

A three-dimensional analysis is required to interpret the drainage behavior of an improved ground with vertical drains, and the macroelement method enables efficient interpretation considering the three-dimensional drainage effect of vertical drains under two-dimensional plane strain condition. In this study, a novel finite element analysis program was developed by applying the macroelement method to the vacuum consolidation method used in ground improvement practice. The conventional macroelement method was used to calculate the amount of drainage from the vertical drain by setting the excess porewater pressure in the drainage material to zero; however, the program developed in this study was improved to consider negative excess porewater pressure as an actual vacuum consolidation condition. To verify the performance of the program, because of a comparison with the measurement values at the site where the vacuum consolidation method was applied, results predicted by the program and field measurement data showed similar settlement behavior.

• Journal of Electrochemical Science and Technology
• /
• v.13 no.3
• /
• pp.390-397
• /
• 2022

The use of microwaves as the energy source for synthesis and sintering of ceramics offers substantial advantages compared to conventional gas-fired and electric resistance furnaces. Benefits include much shorter processing times and reaching the sintering temperature more quickly, resulting in superior final product quality. Most oxide ceramics poorly interact with microwave irradiation at low temperatures; thus, a more complex setup including a susceptor is needed, which makes the whole process very complicated. This investigation pursued a new approach, which enabled us to use microwave irradiation directly in poorly coupled oxides. In many solid-state electrochemical devices, the support is either metal or can be reduced to metal. Metal powders in the support can act as an internal susceptor and heat the entire cell. Then sufficient interaction of microwave irradiation and ceramic material can occur as the sample temperature increases. This microwave heating and exothermic reaction of oxidation of the support can sinter the ceramic very efficiently without any external susceptor. In this study, yttria stabilized zirconia (YSZ) and a Ni-YSZ cermet support were used as an example. The cermet was used as the support, and a YSZ electrolyte was coated and sintered directly using microwave irradiation without the use of any susceptor. The results were compared to a similar cell prepared using a conventional electric furnace. The leakage test and full cell power measurement results revealed a fully leak-free electrolyte. Scanning electron microscopy and density measurements show that microwave sintered samples have lower open porosity in the electrode support than conventional heat treatment. This technique offers an efficient way to directly use microwave irradiation to sinter thin film ceramics without a susceptor.

• Journal of the Korean Society for Library and Information Science
• /
• v.56 no.1
• /
• pp.321-345
• /
• 2022

Public libraries have been facing new challenges as the number of channels providing information resources has been increasing due to information and communication technology development. The perception of public libraries of the general public is that they should continue to play a substantial role in information services. However, the libraries' environments are changing, and the public's needs are diversifying, so public libraries also need to differentiate themselves from other organizations that provide similar services. This paper proposes branding as a solution to create differentiation. The study conducted a questionnaire survey with Koreans in their 20s. A series of statistical tests with the survey data showed the impact of the brand association elements on customer satisfaction and brand loyalty and identified unique factors in public libraries. For example, Brand associations such as material-based services, benefits, and attitude affected both dependent variables. On the other hand, the non-product association such as space/place images did not. Based on these findings, we provided implications for introducing branding in public libraries.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.11
• /
• pp.81-87
• /
• 2022

In this paper, we propose diffraction-based sound control method to improve sound immersion in a virtual environment. The proposed technique can express the wave and flow of sound in a physical environment and a pattern similar to diffraction in real-time. Our approach determines whether there is an obstacle from the location of the sound source and then calculates the position of the new sound reflected and diffracted by the obstacle. Based on ray tracing, it determines whether or not it collides with an obstacle, and predicts the sound level of the agent behind the obstacle by using the vector reflected and refraction by the collision. In this process, the sound attenuation according to the distance/material is modeled by attenuating the size of the sound according to the number of reflected/refracted rays. As a result, the diffraction pattern expressed in the physics-based approach was expressed in real time, and it shows that the diffraction pattern also changes as the position of the obstacle is changed, thereby showing the result of naturally spreading the size of the sound. The proposed method restores the diffusion and diffraction characteristics of sound expressed in real life almost similarly.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.6
• /
• pp.727-732
• /
• 2022

Applying the calculated cross-sectional reduction due to the corroded rebar investigated in the field to the numerical analysis model, the damage pattern and delamination of concrete in the field showed a tendency relatively similar to the numerical analysis results. It was analyzed that when the expansion pressure due to corrosion of the reinforcing bar is greater than the tensile stress of the concrete, cracks are generated and the concrete cover can be fracture. As a result of this study, the correlation between the corrosion rate of reinforcing bars and the crack occurrence of the concrete cover of the subway box structure was verified based on the numerical analysis and field test results. To prevent rebar corrosion, the corrosion rate can be reduced by applying rust prevention to the reinforcing bar and changing the material. In the case of exposed to a corrosive environment, the tensile strength of the concrete is improved by adjusting the concrete compressive strength to secure durability against the expansion pressure caused by the corroded rebar.

• Advances in concrete construction
• /
• v.14 no.5
• /
• pp.317-330
• /
• 2022

This paper investigated computationally and experimentally the interaction here between a notch as well as a micropore under uniaxial compression. Brazilian tensile strength, uniaxial tensile strength, as well as biaxial tensile strength are used to calibrate PFC2d at first. Then, uniaxial compression test was conducted which they included internal notch and micro pore. Experimental and numerical building of 9 models including notch and micro pore were conducted. Model dimensions of models are 10 cm × 10 cm × 5 cm. Joint length was 2 cm. Joints angles were 30°, 45° and 60°. The position of micro pore for all joint angles was 2cm upper than top of the joint, 2 cm upper than middle of joint and 2 cm upper than the joint lower tip, discreetly. The numerical model's dimensions were 5.4 cm × 10.8 cm. The fractures were 2 cm in length and had angularities of 30, 45, and 60 degrees. The pore had a diameter of 1 cm and was located at the top of the notch, 2 cm above the top, 2 cm above the middle, and 2 cm above the bottom tip of the joint. The uniaxial compression strength of the model material was 10 MPa. The local damping ratio was 0.7. At 0.016 mm per second, it loaded. The results show that failure pattern affects uniaxial compressive strength whereas notch orientation and pore condition impact failure pattern. From the notch tips, a two-wing fracture spreads almost parallel to the usual load until it unites with the sample edge. Additionally, two wing fractures start at the hole. Both of these cracks join the sample edge and one of them joins the notch. The number of wing cracks increased as the joint angle rose. There aren't many AE effects in the early phases of loading, but they quickly build up until the applied stress reaches its maximum. Each stress decrease was also followed by several AE effects. By raising the joint angularities from 30° to 60°, uniaxial strength was reduced. The failure strengths in both the numerical simulation and the actual test are quite similar.

• Tunnel and Underground Space
• /
• v.33 no.4
• /
• pp.244-254
• /
• 2023

The disc cutter mounted on the Tunnel Boring Machine (TBM) is subjected to cutting forces in three dimensions during rock excavation process. It is widely known that the cutting forces increased with the strength of the rock mass, while the rolling force can be significantly increased when the disc cutter encounters abnormal rotation. Therefore, the cutting force acts on the disc cutter provides important information because it represents the conditions of the rock mass and the disc cutter. For these reasons, several studies have been conducted to measure the cutter forces in real-time. This paper introduces the current status of research on the cutter force measurement of TBM disc cutters, which has been reported in the literature. It is judged that this paper can be a useful reference material when similar technologies are developed in Korea in the future.